Don't over do it! Increase your Kubota lift capacity in 30 minutes! Bonus

Don't over do it! Increase your Kubota lift capacity in 30 minutes! Bonus - new product!

Рет қаралды 17,582

9 ай бұрын

I wanted just a bit more lift capacity, so I added a couple shims resulting in a problem being solved for me. Of course, you can go higher than I did, but is it really necessary? 80 cents and 30 minutes or less of my time that will make a big difference.
511 - your first line of defense in equipment protection Full line of Kubota, John Deere and Kioti products in stock and ready to ship free to the Continental US.
www.5elevendesignz.com
Ben's Firewood - profile.php?... bpostiff@gmail.com

Пікірлер: 35

@ya472 Ай бұрын

So many owners get freaked out by Manufacturer's specs. Those specs are FOR their PROTECTION, for warranty and liability costs, not because of machine capability.

@TonysCoolTools 9 ай бұрын

Justin neat design on that third function valve especially no electrical components necessary.👍TCT

@5elevendesignz511 9 ай бұрын

Thank you sir!

@JCWren 9 ай бұрын

Saw an interesting tip on another channel. Find a cheap vacuum cleaner at the thrift store, anything wit a hose on it. Remove the dip stick, place the hose over the hole, turn on the vacuum. You'll little to no leakage out of any hose you disconnect that's got a return to the tank. If you disconnect a cylinder hose, you might lose whatever's in the cylinder, depending how full that side of the cylinder is and which way the port faces. The vacuum won't suck up any hydraulic fluid, but the negative pressure prevents leakage. Going to try that next time I change the filters on my L4701.

@5elevendesignz511 9 ай бұрын

I did this when I performed the 100 hour service. It worked well!

@bobpurs 9 ай бұрын

Did same to my JD 790. Shimmed and added about 400psi and made a big difference. Found out mine was low from the factory.

@5elevendesignz511 9 ай бұрын

Looks like mine was at the lower end.

@danielclapp636 3 ай бұрын

I have heard many stories that the JD790 was known to have front axle issues. Anybody out there happen to know if this is true. Being able to lift more weight would more than likely add insult to injury. My son in law has a JD 790 that has front axle work twice in 700 hours, otherwise a great tractor.

@bobpurs 3 ай бұрын

@@danielclapp636 We have 2 here on the farm. Mine has 700+hours and my Uncle’s had 1800 and no issues other than seals from mud

@danielclapp636 3 ай бұрын

⁠@@bobpursMessick’s did a good video on loader strength vs front axle ratings. He was surprised how little the front axles were rated on compact tractors. He factored in the weight of tractor plus loader plus how much ever weight is in bucket. He had a Kubota and a Deere for example. I always had concerns about that considering the front end takes the most abuse and is the weakest part of tractor. When tractor has a bucket full that it can barely pick up and tractor is teetering on that little axle, imagine the weight that axle is supporting. Even with ballast on the rear.

@bobpurs 3 ай бұрын

@@danielclapp636 Yep seen that video. Have not heard of any failing though!Look at Rockhill Farms he did some good videos also on the subject. He shimmed, put on bigger cylinders and put in a Hydros Plus pump

@waynederby4684 9 ай бұрын

Nice demonstration and information Justin.. Could you please show how & where to do that on your "new" L3560. Would love to add some list to my 6060. Still have some photos & suggestions to send you. Will soon. Be Well.

@5elevendesignz511 9 ай бұрын

Thank you Wayne! I haven't tackled that yet, but when I do, I will likely make a video.

@GPOutdoors 9 ай бұрын

Hey Justin. Firstly, I wanted to say I think you make great products/mods for our tractors. You do. But, I have to comment that you showed us how to increase the lift capacity but you didn't mention one of the most important aspects of this mod. The need for rear end ballast or counter-weight. These little sub and compact tractors are little work horses but when you increase the lift capacity beyond the MOE specs, on a tractor that weights shy of 1,500 lbs, the operator is in for a tragic surprise. Just a friendly note - new tractor owners don't have the experience/appreciation to understand the relationship between lift and rear end ballast. Your mod to increase lift capacity with no consideration of the need for rear end ballast is a recipe for a terribly bad scenario. Just a friendly suggestion to ensure you recognize this critical consideration in future videos. Cheers and thanks for the great products you design. Cheers!

@5elevendesignz511 9 ай бұрын

Thanks Gord. I appreciate the compliments and feedback. With or without the 5% increase (which is still within factory spec as shown in the video), most loaders will lift the rear off the ground well before reaching their capacity without ballast. I have about 900 lbs of ballast in the video, which is just right. If a 5% increase affects your ballast, you don't have enough to begin with. Ballast is another topic that could be a longer video. This video was simply to show that although some people go crazy trying to get a machine to do well more than it is meant to, a small increase can be all you need.

@roberthale8407 8 ай бұрын

You forget as well there is a weight limit on the front axle, it's listed in the loader manual.

@5elevendesignz511 8 ай бұрын

@roberthale8407 Understood. As shown in the video, the pressure was set to 2300 PSI. The upper limit of the factory specification is 2340 PSI.

@jasonjackson6055 8 ай бұрын

Ok, how about you let everybody know that they ought to leave their bushhog on the back while using their loader. This is a non-issue.

@ya472 Ай бұрын

@jasonjackson6055 Bush hog for ballast? That is awesome if you are working in a big open space, but it is totally impractical when moving items within any structure.

@philthymcnasty2495 5 ай бұрын

This is simply amazing. Would doing this to my new L3302 void the warranty?

@5elevendesignz511 4 ай бұрын

If you went above the pressure specification, I would assume so. If within the specification, I wouldn't think so. Thanks for watching!

@craigguinn5423 Ай бұрын

What are your hose ratings, my BX is 3000# on the hoses.

@chrossphyre 5 ай бұрын

Wondering if you plan an expansion of the foot operated third function to the BX series?

@5elevendesignz511 5 ай бұрын

Possibly, but no immediate plans currently.

@brianberg5060 4 ай бұрын

Did anyone do this and notice a decrease in driving power? I added about 1.2 mm to my 2501 and while it definitely increased lift, it seemed to decrease power traveling, esp in high gear. Anyone else experience??

@5elevendesignz511 3 ай бұрын

I could be mistaken, but this should not affect your HST functionality.

@ele4853 3 ай бұрын

Thanks for sharing. What is the weight of your load?

@5elevendesignz511 3 ай бұрын

I have no way of actually measuring it, but I would estimate around 1300 lbs give or take.

@garyhoward3123 8 ай бұрын

Great way to break the front spindles making a toy tractor lift more.

@5elevendesignz511 8 ай бұрын

I think I am safe since it is still within factory specifications. Thanks for watching!

@wizard_of_poz4413 3 ай бұрын

Immediately disregard when he thinks anything that's not a 4440 is a toy tractor

@Beavercreekbait 8 ай бұрын

This is America convert your measurements to thousands

@5elevendesignz511 8 ай бұрын

I worked for a Japanese company for 20 years working in microns, so it is habit and these shims are sold in metric thicknesses. This is a Japanese tractor, why would I convert a measurement that I understand? Thanks for watching!

@silverbackag9790 7 ай бұрын

You win the dumbest comment on the Internet for November 23. Congrats.