CNC Plasma Table Upgrade

No video

CNC Plasma Table Upgrade

Рет қаралды 155,559

3 жыл бұрын

Upgrading the homemade CNC plasma table. Check out the full CNC plasma build playlist here: • CNC Plasma Build
Check out my other videos on my channel page: / donndiy
#donndiy #homemade #cnc
Soundtrack:
Pomade - Silent Partner (KZfaq Audio Library)
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter

Пікірлер: 165

@DonnDIY 3 жыл бұрын

More fabrication videos on kzfaq.infovideos

@Oerknalx 3 жыл бұрын

Need more meme's i mean video ;)

@knyazknyaz226 2 жыл бұрын

@@Oerknalx p

@knyazknyaz226 2 жыл бұрын

@@Oerknalx p

@knyazknyaz226 2 жыл бұрын

@@Oerknalx p

@erikbongnilsson246 Жыл бұрын

Could you share something about how much money you saved compare to buying a similar size plasma machine? The cutter itself i guess cost more then the rest of the machine, but lets say if you were to buy a machine that comes with the same plasma specs

@robertmanley7556 3 жыл бұрын

I think it a GREAT setup !! Nice touch with the new belt and end plates and belt tensioner helps get more cutting space for sure !! I have to say it was cool to hear you talk in this video !! I don't think you have ever spoken this much in any of your other video's it was really cool to hear !! Great video as always !! 👍👍

@DonnDIY 3 жыл бұрын

Cheers man!

@malc380 3 жыл бұрын

I do like the use of "do hicky" in place of "thingymebob" much more rustic hahahaha! Keep it coming Donn, we love watching you create. :)

@DanKoning777 Жыл бұрын

I prefer "do hickey" too if I'm mad and can't work on my "whatchamacallit" project. I'm mad b/c I lent the last "thingamajig" I had left to my neighbor "whatshisface" who said he lost it while fixing his thingumabob project. Even worse, he already had 2 "doodads" that would've worked just fine! 😂

@jlucasound 3 жыл бұрын

Oh, you are so close to one million subs.. Thanks for all the cool videos, Donn. Your high level of understanding of mechanics, physics and (all the) dynamics makes you steps above the "book smart" engineers. I have worked with many (over rated engineers) in my life. They have nothing on you or I. Isn't it cool to be able to think "outside the box"? The beefing up of the plasma CAM will make everything run tight and smooth.

@ljubomirbogdanovic5786 Жыл бұрын

Će će

@olddawgdreaming5715 3 жыл бұрын

Thanks for sharing with us Donn, enjoyed your video. You make it look so easy. I’m impressed. Fred 🙏🏻🙏🏻👍👍👏🏻👏🏻👋👋

@frenchphil189 3 жыл бұрын

Now that's a proper workshop sink...

@garthmonday 3 жыл бұрын

It looks like the men's urinal in a bar in Perth I once went to.

@frenchphil189 3 жыл бұрын

@@garthmonday That must have been pretty rank.....but compared to the toilet I walked into in Nepal .....indescribable..

@blackbuttecruizr 3 жыл бұрын

Looks great, nice work and awesome upgrade. Always look forward to your uploads!

@billthomas4403 3 жыл бұрын

Your knowledge and tools have advanced so much over the years. I learn something in every video. I really like the skinny paint marker you have. I'll start looking for one. Thanks a bunch and please keep the videos coming... Bill

@DonnDIY 3 жыл бұрын

Cheers man. I got my marker from toolmarketing.eu

@jeffselchow5719 3 жыл бұрын

Setup looks good Donn, I would be very happy to have this.

@DanKoning777 Жыл бұрын

I don't know what: "RGB" is all about, but with regard to the series, its final outcome, and the parts it'll produce for future builds that we all enjoy, I'd say this is a ⭐⭐⭐⭐⭐ setup/build. God bless.

@PhG1961 3 жыл бұрын

Amazing ! What a great workshop you have with very nice equipment ! Really cool !

@kameljoe21 3 жыл бұрын

Nice upgrade. Really should help when making parts for builds. Current build is the rock crusher. I am sure there are many more in the works.

@user-im5wi4pv3b 3 жыл бұрын

Hello friend🖐 ️ everything is as always at a high professional level 💪 😀 👍 👍 👍

@DonnDIY 3 жыл бұрын

Cheers mate! Spasibo!

@dumbasscountryboy 3 жыл бұрын

You have an AWSOME workshop Donn!!! And every little upgrade you do makes it even better. 👍👍

@DonnDIY 3 жыл бұрын

That's the idea behind upgrades 👍🙂 Hopefully one day I can take a look at my workshop and say to myself: "It's finally done and finished, no more upgrades are needed", but I really doubt it 😁

@BleuCollarFndryMTL 8 ай бұрын

Your system runs pretty fast, you did a great job!

@DonnDIY 8 ай бұрын

Cheers!🙏

@Bret4207 3 жыл бұрын

I didn't even know what a CNC plasma cutter was until I watched this! I thought I was pretty high tec when I clamped a 2x4 to a table so I could torch cut a more or less straight line! ;)

@65cj55 3 жыл бұрын

That CNC Router of your friends looked like a handy size.

@hipairbrush1053 3 жыл бұрын

I love that plasma cutter. Really cool.

@robertkeime4907 3 жыл бұрын

Great video

@gwpsr58 3 жыл бұрын

Good to hear you speak more in this episode, rather than just the occasional "Like a glove ..."

@DonnDIY 3 жыл бұрын

😁

@mrGorin 3 жыл бұрын

Донн всё сделает!!! Красавчик! 👍💪👋

@zasheeboo8139 3 жыл бұрын

Дон дай заговорил... Я в шоке. Ни чего не понимаю, но всё равно лайк. 😎👍

@DonnDIY 3 жыл бұрын

Spasibo!

@PetkoDim 3 жыл бұрын

Красиво! Отличный станок! СПАСИБО!

@gysbertvanderwesthuizen8011 3 жыл бұрын

Great Work Donn! I also bought one of those Makita copy's, over a year ago, and it is still working good. Mine is totally unbranded from Bangood.. So I ordered the Impact driver a couple of days ago, still waiting for it, but we will see how that one performs? It looks like they are made from the Makita mould's? Be sure to give an update, once you have used it a lot.

@s.m.aggies7220 3 жыл бұрын

Thank you, great thought of improving your Plasma

@JohnSmith-ud9ex 3 жыл бұрын

We got a talky ! = )

@CerealKiller. 3 жыл бұрын

*memes that made Donn take a day off hahaha*

@barrywest3758 3 жыл бұрын

I surely hope you don't get Meme d by that Memes! I don't care how long the angle grinder lasts as long as I can see and hear it grind! 😁👍

@gafrers 3 жыл бұрын

Great job as always.

@yeagerxp 3 жыл бұрын

Excellent work👍👍👍. Thanks for sharing

@stefanpariyski3709 3 жыл бұрын

5/7 plasma setup, much wow!

@danl.4743 3 жыл бұрын

What is "5/7"??

@randytravis3998 3 жыл бұрын

great video ,, with upgrades your machine will be even better , less room for machine mistakes even better product in the end .

@totorina2722 3 жыл бұрын

This washing tray needs a lot of love. Beurk

@darryleevans5930 3 жыл бұрын

From down under. Donn, Q & A. Did you teach yourself all the skills you have.

@Crewsy 3 жыл бұрын

It’s shocking that the “Meme” brand is able to make their tools fit Makita batteries. 😉 Hopefully you get your $40 out of it before the smoke gets out of it. 💨

@DonnDIY 3 жыл бұрын

Yup, I'll torture this angle grinder and give you guys the results after it's grilled into not a "well-done" but an "over cooked" state. Nice and crispy.😁

@patduffy5710 3 жыл бұрын

Wasn't it Bosch who developed this standard battery and made it "open source" (not sure mind and apologies if this is correctly answered below!)

@tim0025 3 жыл бұрын

Hi!Just in case, be warned, the reducers of these fake makitas are sometimes "dry", you have to add the grease yourself! Otherwise very handy tools!

@Cfernanv Жыл бұрын

Excellent work, could you share the electronic schematic, structure design, configurations.

@bobpowers9862 3 жыл бұрын

As Lauri Vuohensilta would say, "pretty good". :)

@late221 3 жыл бұрын

Are you from finland

@bobpowers9862 3 жыл бұрын

@@late221 No-- but I love watching the Hydraulic Press Channel.

@LhajBELAAIDWorkshop 3 жыл бұрын

Great idea's bro 👌👌👌👌💪✌️🤞🤞🤞

@art-134 3 жыл бұрын

0:03-- сразу лайк!!)) Буду смотреть,как робот из Скайнета делает для Донни полезные в хозяйстве хреновины!!)))))))

@timothyniemi3804 3 жыл бұрын

Now on with the rock "CRUSHER"...L0L

@DonnDIY 3 жыл бұрын

Yes!💪

@BigBlueMotors 3 жыл бұрын

No lollygagging on that rock crusher. 😀

@richardbradley961 3 жыл бұрын

hi don, nice to hear you talk ,, your english is verry good . regaqrds richard.

@lucasp8203 3 жыл бұрын

Dobra robota bracie jak zwykle

@tjs_welding_and_fabrication 3 жыл бұрын

You make me want to take all my custom brackets off of my cnc table and paint them.

@quarlow1215 3 жыл бұрын

Nice mod Donn.

@robertoszym2 3 жыл бұрын

I really like your comments in a films. You should stick to speaking. As always great content.

@cazadoresdeldesiertocd.jua6471 3 жыл бұрын

Exelente

@michaelkozelka4803 3 жыл бұрын

You keep your shop pretty clean, however, that sink! You can use your new grinder with a wire wheel and clean it up. lol You might need a sandblaster lol

@DonnDIY 3 жыл бұрын

The sink does it's job mate🍻😁

@michaelkozelka4803 3 жыл бұрын

@@DonnDIY True, but don`t wait till you need a jack hammer. lol

@AsitShouldBe 3 жыл бұрын

my favourite youtuber 👍👍

@headmaster84gm 3 жыл бұрын

Good night, laydies and gentlemen.

@flatlinesup 3 жыл бұрын

Wish ya'll would make and offer plans for this. I'm sure I'm not the only one that would love to get a set!

@DonnDIY 3 жыл бұрын

The intellectual property is not mine to sell. It's my friend's brainchild. 🙂

@handlebullshit 3 жыл бұрын

Very nice.

@Maubere-reac 3 жыл бұрын

Finally you speak up on film😂👍 i always follow your channel(never hear you talked)but now i do. PLASMAKUNN

@jpirkin 2 жыл бұрын

You did a very nice job building this CNC. Could you tell me where to find the Alu U profile?

@decorativeironplus4644 2 жыл бұрын

cool im glad to see you got a cnc plasma machine set up id be lost without mine . i sure like the drives you used where did you get the drive strip it sure looks like it allows it to run alot smoother im in dire need of revamping my gantry and been looking for a better solution so i can run higher ipm speeds

@opendstudio7141 3 жыл бұрын

I'm wearing headphone and the servo motors sounded a bit louder after the drive belt upgrade. That makes me want to ask questions. Did you use a different camera or mics between takes? Are the motors having to draw more current to compensate for added stiffness? Does the belt flexibility change between hot and cold temperatures or is it stable over a broad thermal range? :) I know you are pretty thorough when you research stuff, nevertheless there is no harm in asking.

@NilsKall 3 жыл бұрын

Well (d) done!

@Work_G 3 жыл бұрын

Nice !

@tonnyplaysgames220dailygam5 2 жыл бұрын

Awesome 👏

@magnum357225 2 жыл бұрын

Do you think its better to do belts or a gear rack setup

@Svendus 2 жыл бұрын

Hi thank You for Shearing ? Did you ever try to cut with nitrogen (co2) instead off atmospheric air ? i get a a lot off slagging on the backside that has to be removed with a needle hammer and the surface has to be cleaned with a grinder before welding

@DonnDIY 2 жыл бұрын

Hi, Svend! Nice to hear from you. I'm a big fan of your chain sawmill. 👍 I haven't used CO2 and can't say whether it's benefitial or not compared to regular compressed air. If there's too much slag on the backside you might want to play around with the cut settings - adjust feed rate and amperage. I usually get too much slag with higher amps and lower feed rate. The sweet spot is somewhere in the middle. I have dialed in settings for 3, 6, 8, 10 & 12 mm material on my machine but I still play around constantly to get even better cutting results. And to get slag off of material I just use old sharpened file, this knocks the slag right off, no need for grinding. I hope this helps! Thanks for watching!

@amrmegahed4309 3 жыл бұрын

Great work as always But do you think this setup will be functionally, stable and accurate more than rack and pinion like helical gear

@ShainAndrews 3 жыл бұрын

Must be making bank on KZfaq... paying for Memes... LOL.

@DonnDIY 3 жыл бұрын

Best memes are free though 😁

@veikko7962 3 жыл бұрын

Hmm hope these belts are not steel reinforced, as that bending will work harden steel, strings start to break and belts start to stretch. Had that issue with 3d printer..

@paulmartin3340 3 жыл бұрын

Good stuff Donn, Lol i noticed you use the term do hickey too ! Did you pick that up when you were here in Australia? Cheers from Sydney Australia 🇦🇺🦘🐨🇦🇺🇪🇪

@anthonydomanico8274 2 жыл бұрын

What is the advantage of making the torch mount spring loaded as opposed to the torch being rigidly mounted to the Z axis “platform?”

@davez4172 2 жыл бұрын

The "floating" torch allows for sensing the material height without binding the z axis when slewing down. There is a microswitch that is contacted when the torch floats up and the machine is calibrated to "know" how far up the torch must float to make the switch.

@motowechiku5813 Жыл бұрын

Witaj, jakiego rodzaju pasek został zastosowany HTD? Ile zębów na kole zębatym? Pozdrawiam👍

@neillawson4493 3 жыл бұрын

Judging by the state of your sink, it looks like the cleaning lady hasn't been in again.

@jlucasound 3 жыл бұрын

So satisfying. :-)

@randomdiy6717 2 жыл бұрын

What is the software you are using, great work man

@randywendel 3 жыл бұрын

I looked online for the Memes cordless tools and didn’t find them. Am I spelling it wrong

@simonlutz4519 3 жыл бұрын

I need this marker

@taciolps 2 ай бұрын

Which belt model is the tensioner for?

@user-ti7md9gd9n 3 жыл бұрын

Ничего не понятно, но очень интересно!

@davideason5654 3 жыл бұрын

100% awesome

@idrisddraig2 3 жыл бұрын

I have the same grinder, mine is branded Drill Pro. Project Farm called 'em cousin Eddy. Think AVE had another name

@DonnDIY 3 жыл бұрын

Yeah, this is exactly the same thing as DrillPro. My friend has one too. We'll have an angle grinder frying competition going on. I'm planning on winning. 😁

@kurttaz 3 жыл бұрын

Needs rgb in the water tank😋

@gamingiot 2 жыл бұрын

hi. witch motors are you using. Thanks

@markuspihlajaniemi3711 3 жыл бұрын

Hi. Plasma torch z hight switch was differend than original version . Where i could get it or is there closer video somewhere?

@DonnDIY 3 жыл бұрын

My friend at Blackloop CNC made it. Look up blackloop.ee and contact him. He can make you a set if you want.👍

@METALSOULJAHGAMING Жыл бұрын

WHERE DID YOU GET THE ELECTRONICS AND PARTS AND THE PROGRAMS TO USE THIS TABLE? DO YOU HAVE A LIST?

@jesperwall839 3 жыл бұрын

Plasmakunn is not that far away from the Swedish word for the same, plasmakung 👍😀

@anderst5248 3 жыл бұрын

Yes it is close, but "kunn" is a slang word for "kuningas" that translates to king or in swedish kung.

@facavocemesmo3334 3 жыл бұрын

Sensacional 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

@pirnimoos 2 жыл бұрын

Hei Donn. Oskad nõu anda? Mul plasma 100A, 1.5x3m laud. Plasma peaks lõikama 12mm terast, ja seda ta ka teeb. Plasma juga uute düüsidega, elektroodidega jm. tuleb otsast nagu instant kalde all. Mis probleem olla võib? Õhk on kuiv, ampreid piisavalt, otsikud uued. Pink on aasta vanune. Ja see mure on algusest peale mind kummitanud. Tavaliselt on nii, et alguses lõikab paar detaili mõne avaga enamvähem sirgelt, mitte alati, vahel lõikab ka kohe nurga alla. Kõik mis jahutusest sõltub, siis olen püüdnud need väikesed avad puhtana hoida jne. Ikka ei midagi. Tead vb mõnda kirjandust või kedagi, kellel see probleem on olnud vn?

@DonnDIY 2 жыл бұрын

Ahoi! Kõike muud olulist mainisid peale õhusurve. St. kas kasutad plasmalõikurile ettenähtud survet? Äkki liiga väike ja sellepärast ei puhu korralikult vertikaalselt läbi materjali? Saan ainult arvata, aga ega ma ka täpselt ei tea. Endal 12mm materjali lõigates on nii olnud, et uued kuluosad sisse, kõik põleti kilbi jahutusavad puhtad, aga paari esimese läbistusega sülgab kilbi ja düüsi vahele sodi ja õhk ei tule enam ühtlaselt läbi ja lööb lõike kalde alla. Natukese ajaga tavaliselt puhub ikkagi puhtaks ja lõige läheb sirgemaks. Kilbi piserdan aegajalt keevituskäpa spreiga üle, et sodi nii hullult kinni ei võtaks. Rohkem ei oska midagi arvata eeldades, et juhtprogrammis on eendekiirused paigas.🤔

@bigsid1984 3 жыл бұрын

When we going get a Q&A learn about the man

@Robert-zm5gj 3 жыл бұрын

UTV video when?

@bertusbothma6751 2 жыл бұрын

Do you have blueprints for the project

@DonnDIY 2 жыл бұрын

I have drawings for the steel table frame I made. My buddy at blackloop.ee who built the CNC side of the table has all the CNC related drawings.

@WhataTry 3 жыл бұрын

what happened to the rock crusher?

@DonnDIY 3 жыл бұрын

Obviously it's still an ongoing project.😉

@TheAamens 3 жыл бұрын

heeey, where is crock rusher?

@taciolps 2 ай бұрын

Do you provide the design of the parts?

@DonnDIY 2 ай бұрын

You can contact BlackloopCNC for more information👍👍

@fkiesel9442 3 жыл бұрын

Not sure, if the steel reenforced belts are a good idea. If they have to go around tight corners, the steel tends to break after a while. The belt then stretches, and you will have a lot of chatter. Apparently, Gates belts are pretty good, but pricy.

@LesNewell 3 жыл бұрын

They work well as long as you don't exceed their minimum bend radius. I suspect this setup has a smaller bend radius than is ideal for the belts. I looked into this type of belt when I built mine. In the end I went for rack and pinion. Much stiffer but a pain to install and set up.

@kotun8165 2 жыл бұрын

@BigBlueMotors 3 жыл бұрын

Quit dilly-dallying and get that rock crusher done. 👍

@gilb6982 3 жыл бұрын

How much do you pay to see those video to be so pushy M. Kareen ? For me those video are FREE and very interesting !

@BigBlueMotors 3 жыл бұрын

@@gilb6982 I was being sarcastic. I was playing with the do- hickey terms that Donn was using in his videos. Lighten up dude. 😀

@DonnDIY 3 жыл бұрын

I've been sick these past couple of weeks and at the doctors so time has not been on my side when it comes to projects. I'll continue the crusher ASAP since I needed it two years ago. 😁

@BigBlueMotors 3 жыл бұрын

@@DonnDIY Sorry to hear that you're sick. Take your time to recover and get plenty of rest. 😀

@vladzaha4169 3 жыл бұрын

🤘

@bl00dh4nd4 3 жыл бұрын

Amazing, one must take care of tools so tools take care of the job. Also I’d rate your setup 69/10 😹

@KRIVORYKII-M 3 жыл бұрын

👍👍👍👍👍👍

@chrisschultz143 3 жыл бұрын

👍

@mattiasfagerlund 3 жыл бұрын

You're the "Plasmakung" (/Swedish)

@Stanislav1971 3 жыл бұрын

👍 👍 👍

@puncherdavis9727 3 жыл бұрын

As the master grinder looked at the memes grinder it's trembled beneath his fingertips for its knew that it was going to meet its Doom grinding disc after disc after death into Oblivion Dome Dome Dome dramatic music overlay sound of grinder hitting metal heavy metal background music sound of Donn laughing maniacally in the background

@DonnDIY 3 жыл бұрын

It's brushless though, so I expect more from it than any other chinese tool. 😀

@puncherdavis9727 3 жыл бұрын

@@DonnDIY well if nothing else do a review for us let us know how it holds up compared to the other ones you have used because you have ground a lot of stuff