Thanks for watching!

I thought about doing a video on that . I have a couple with the red and green installed already .

you would 100% be able to cruise at 40

Good old fashioned hard work and anyone can have a garage like this .

I grew up with nothing for a garage all my life. I vowed that i was going to have one, and after years of working hard as a mechanic i finally have one. Wasn't easy but worth it, and 6 years later its still my favorite thing hahaha!

I love the Flathead Briggs! We used to modify them with Horstman parts back in the 80's

@@Black66 still do and also using my own modified parts

Its a universal puller. They have inexpensive ones at places like Harbor freight .

THanks!! I have a video coming out that will apply to that bike as well as the Coleman.

I think the advantages of a straight chain are less moving parts and Easier to manage at take off . The power doesn’t come on all at once like with a torque converter . So you can have a heavily built engine and still be able to manage it taking off. Myself I like the Chain set up better for a minibike . Check out my Coleman bike videos . I put a 212 on a cc100x . That bike is fun and pretty fast with a simple clutch set up .

See I like torque converters because id rather ride in the woods and i think the torque converter is a better application for that stuff because u get more power on the lower end….Everyone is different and I think it really depends on WHERE you’re planning to ride it…If i did alot of street riding, id absolutely have a clutch setup though..

@@ziggybammurphy1645 I totally agree with you. The torque converter is perfect for riding in the woods and trail riding.

Sweet!

The stock piston is fine and will work good with the 265 cam . But the stock rod I would replace with a billet rod .

Because that cam is capable of over 7000 RPM . The stock rod would be the weak link

@@Black66 you have a link of billit rod for predator 212 non hemi?

@@l.a.m7645 You can use the stock length rod or maybe even a .020 rod depending on how far down the piston is in the hole. That's if you want to bump compression a little. Here is the link www.arcracing.com/6254-arc-billet-rod-hf-predator-212cc-std-3-308-x-1-191-x-709/

.003 is good

Yes, I added an advanced flywheel key to the stock flywheel to get some timing advance like the billet wheels have

@@Black66 okay Thank you

@@Black66 Because I’ve been asked my mama can I get one

@@Black66 and she said she got a pay bills

Not continuous, just for 10 seconds @ 10k

Tilly tank in this video. Check out the Doodlebug playlist for many engines and combos on this bike. kzfaq.info/get/bejne/rpxhfa6TkqfDaGg.html

In this video the stock flywheel.

There is some drone footage on this beast video,check it out kzfaq.info/get/bejne/prx9ppmd2M6se40.html

I had a 3D clutch on the kart. It was fun for burnouts and stuff like that but I'm not sure if the acceleration is better or top speed. I would have to test it to see.

@@Black66 if you have a stock 212 can you give it alot of gas and then will it do a wheelie

@@adambolko2448 yes, it will do a wheelie with a stock engine if it has a torque converter.

@@Black66 I’m talking about the the manual clutch

@@JackJohnson-mx3ny I have one for the kart. Here is a video kzfaq.info/get/bejne/hZNzl7plndetn6M.html

Thanks. Here is the link to the mount www.ebay.com/itm/153979950963?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

@@Black66 What a legend. Thanks bud!!!

@@bigmacmillerlite8775 That's right! A legend in my own mind LOL

digHUD and a Dragy device for 0 to 30

I have a video coming 👍🏼

@@Black66 any update on that video? I’ve been watching your channel religiously and have been wanting to see what a cvt will do with taller gearing. I’m worried it’s going to slip like crazy on takeoff. I have just ordered a 38t rear sprocket for my CT200U-EX with a 30 series cvt so I guess I’m going to find out one way or the other. Thank you so much for all the great content. 🙏

@@kickboxs77 Thanks! Ya, I have a video on that coming out in a week or so

That gas tank is off of the Coleman cT200 mini bike engine.

The riser plate holds the driven side of the torque converter high enough to clear the frame rail.

Most of the parts used are linked in the description of the videos.

@@Black66 I looked only link is for the torque converter

@@mastermatt289 The link is in the description of this video kzfaq.info/get/bejne/j7aghZxi0dbPhnU.html

@@Black66 Thanks!

That’s the truth !! Lol 😂

Ive built a little custom mini chopper with about the exact engine and gears and even with the cheap stock comet30 and some white springs that thing is a wheeling rocket ship🤣! Puts a smile on my 45 yr old a$$ everytime i taker out for a rip hahah! But it destroys the drivers quick so i ordered a juggernaut finally. Hope its and improvement as reviews are skewed!?!?

No, but you can get an adapter to make it fit a 5/8 shaft for a few bucks on Amazon

@@Black66 thank u bro

Only for a minute . And then I will figure out some other combo to try lol

@@Black66 this is what I like about your videos. You are constantly on the hunt for more performance and you test everything as soon as you do it and show the results. The mini bike performance parts industry should be all over you with sponsorships.

@@RedfishInc Thanks ! It’s fun trying to figure out what combos work . And the cool part is if it doesn’t work that good we can always change it.

Not sure what engine you running but a torque converter is good for exactly that. It will have really good low end and decent top speed. Check out this video. I put a torque converter on a mobility chair. kzfaq.info/get/bejne/mq9-mNqYsNvem5s.html

@@Black66 it's a 157qmj engine. Cvt trans which runs with belt and chain. It's a icebear 2020 q6 trike. I'm new to all this moped life. Which this is my first scooter/moped I've ever own. I've seen alot of videos which people talk ABOUT big boreds and torque changing. But like Ive said I'm new to this. I've recently sub to your channel as I've notice that you are different from others. Seems like you sure know your stuff when it comes to this bikes. I've recently seen some where you change the torque tooths to more tooths n get a faster response from a stop n go point of view. I've also seen the video where you put the juggernaut I belive was called n damn the mini bike flew lol. That's exactly what I want my bike to do from a stop n go. I still need to upgrade few more simple things like the carbs. It's factory and comes plug from the air fuel ratio screw. Which don't allow me to adjust it. Do you provide parts I need to upgrade my icebear?

@@user-nw7mr8ib3d Thanks for the sub. No, I don't do any parts or anything. I actually do this stuff more for fun. It's fun testing different combos. I learn a lot along the way. My dad had a kart shop back in the '80s and I never really got rid of the bug. lol Ya, you can make your bike fast and quicker with that torque converter.

@@Black66 where can I find those torque's?

@@user-nw7mr8ib3d I put the link down in the description.

I bought it from a shop back east . I would have to get you the link when I get home . I’m not sure if I put the link in the description.

@@Black66 Thanks, I would like to see the cam specs.

www.ebay.com/itm/133248355322?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

No problems. Most of the time I use RLV GOLD on GOLD 35 chain.

I beat people with slicks all the time and I got a bigger bike

@@dinocitybikelife Because you have a bigger bike. Again if you put on slicks you will get more speed

You know me , it will only be on there for about five minutes lol I actually bought it for another project I’m doing . I’m going to put a clutch back on it.

It was for testing purposes only lol . I have another video I want to do with it and then I’ll put the clutch back on .

Have a different sprocket coming!

@@Black66 your light enough guy you could hit the 80 club I don't know if you want to on a db30 bit you only live once

Yes! Good idea . It is a beast!

Take a drink everytime he says beast, I did on another video and I woke up on the floor several hours later... 😏

@@RedfishInc That thing is a beast beast beast lol 😂

I will , Video coming . I have more videos coming out with that bike

Yes! Lol

@@Black66 I can for real