Thank you for making this video. I learned more in your 11 minutes than in my 3 hour shop class . Actually 2.5 hours with breaks ! Also hard to learn with 6 guys and instructor crowded around machine. Only my 2nd class on the Doosan. I didn’t know about that eye sensor. We did touch off holding a scrap of paper between the workpiece and cutting tool. It’s hard to get the feel of the pressure to hold the paper with how close to set the tool . It will take experience. Already like .0006. off just with set up by feel would blow a job with tight tolerance . Nice to know those eyes are out there to take the guesswork out of the equation. Thanks again for making a video that is clear and you can actually see the control. You are very professional in your explanation and calm even presentation. Plus good example with proper ppe eye protection and work uniform.

Excellent video! I just purchased a used Fanuc controlled lathe and this video has been very helpful in getting up to speed with setup and operation.

Thanks for this video bro. I learned a lot. I started in this trade in January and have been loving every minute of it and I’m running this same machine every day. I appreciate the teaching bro. I’ll be honest when you dropped the tool presetter then closed the door and then referenced the machine I tensed up a little lol 😂

Great video..I saw you dont publique new videos long time ago,I dont understand why. my english is realy poor but I really thank your way to explain every single move of this process. thank you for your time. hope you piblique one to know how to make a program on this kind of lathes.

Thanks so much... From Greece (Here we call Tool Setter)

Definitely one of the most comprehensive and explanatory videos on YT👍. Thank you for sharing this👌💛! This has made me definitely closer from my #Haas'ish understanding to #Fanuc'ish mastery if I can say so.

Well done. Thank you for education. From Russia with frendship.

buenas tardes cual es el codigo para descativar la alarma de la puerta gracias

Hallo bro . Please review GSK

great job. write some programs, facing, od rough, drill, tap, od finish

hehe you wanted to say on a Haas lathe XD

MTS representing!

Sir zoom nothing is seen which key are u using to operate

May i ask cost of machine like that, want have some idea. Thanks.

You should of called up the tool when you probed

HAAS is so much easier to upload and download a program from the USB, but I guess that's FANUC.

I have an older Daewoo Puma without the "tool eye". Setup is so much easier. I just have my T0101 always set to 3.000. Then I face the part and work shift my coordinates to get T101 position to 3.000. If my tools were already set up off of that face then I am done. If not I use a gauge block and input my Z offsets for each tool. Diameters I have to turn and measure. This just seems more complicated for some reason,

On our pumas they say q set

This is why I hate Fanuc. Every single controller is a world apart, even in the same year product run. My doosan lynx controller is totally different.

What about the workshift settings?

Cuando está taladrando sale una alarma algo de hidráulica

Bro, is thier any option to check graph before run the job?

Buenas tardes como está. Saludos desde Bogotá Colombia. Será que me puedes enviar todos los ciclos de ese torno Doosan ciclos de ranura de roscado desbaste en fin todo todos los ciclos de taladrado o si me puedes enviar programas con los códigos del encabezado o micelanios gracias

What year is this Doosan Lynx 220?

You didn't really say anything about homing. You pushed buttons without saying anything.

Good job dude! How do you activate de Y axis?

This is my job 9 years ago other day One coworker know me cough a lot he gave me cough medicine but he lie he gave me the mental medicine I was not remember a lot of words and the boss go play to me then I quit job

They use tool eye on mazak

How old is this machine? Is there no canned cycle for tool setting? I see you manually moving the tool tip around and selecting the quadrants using numbers instead of visuals.

Nope, once u go dmg there is no going back..

Where is your country sir??

Cómo puedo programar un ciclo de taladrado profundo

So when you set up that part again, because you save the program after the setup in the usb, will the tool offsets and geometry all be the same when you load it back up ? As in you won't have to touch off any tools ?

Hello sir, Where do you write the tool high? Page?

I añmps forgot all about cnC lathes,, besides ,I'm making more money on construction.

And this is why I hate Fanuc!!!........so many key strokes and different pages and arrow across to do ...

And the award for the worst camera guy goes toooooo.

I hate fanuc😢