THRASHIN SUPPLY T BARS INSTALLED ON MY HARLEY DAVIDSON ROAD GLIDE! *HOW TO*
Рет қаралды 36,691
Жыл бұрынI installed a set of Thrashin Supply T-Bars on my 2019 Harley Davidson Road Glide Special! This is a step-by-step video on how to install these on your road glide. Make sure you browse the channel and subscribe! As always, Thanks for Watching!
Follow me on Instagram @dooworkmotorsports!
Disclaimer Make sure that if you do this modification to your bike, you take it to the dealer to get a CVO ignition flash because in order to run the Thrashin Supply Top Tree, you have to remove the factory fork lock ignition.
Full Parts List:
Thrashin Mid Bend Bars - Black
www.thrashinsupply.com/produc...
Thrashin 9.5" Pullback OG Risers - Black
www.thrashinsupply.com/produc...
Thrashin Road Glide Top Tree - Black
www.thrashinsupply.com/produc...
Thrashin Road Glide Gauge Relocation - Black
www.thrashinsupply.com/produc...
Thrashin OG Riser Gauge Relocation Bracket - Black
www.thrashinsupply.com/produc...
Thrashin Clutch / Brake Perch Clamp - Twice Cut
www.thrashinsupply.com/produc...
ODI V Twin Lock On Grips
www.jpcycles.com/product/550-...
@DOOWORKPRODUCTIONS Жыл бұрын
Disclaimer: Make sure if you do this modification to your bike, you must take it to the dealer to get a CVO ignition flash because in order to run the Thrashin Supply Top Tree, you have to remove the factory fork lock ignition.
@matthettick2403 4 ай бұрын
Just found this out wiah I read this comment took me hours
@CoreyM Жыл бұрын
Great video. Definitely bookmarking for a resource later when I do this modification. Running their adapter plate but the triple tree and gauge relo is on the list! Thanks for sharing!
@johnmacias01 Жыл бұрын
I’m impressed with your bars & install. Looking good!
@campbell696969696969 Жыл бұрын
Genuinely the best how to t bars video ove ever seen , you made that super simple
@jeffchene4661 Жыл бұрын
That's probably the best set up I have seen of all the tbar styles. I like the location of the guages. Nice parts, sick bike!
@Ammo_HD Жыл бұрын
Did these on my 22 RG this winter. I absolutely love them! I got the 9.5" pullback, Mid bend bars, perch clamps, top triple tree, and gauge relocation. They are top notch quality!!!
@bradleyb5021 8 ай бұрын
Stock wiring and lines?!
@soldier09r Жыл бұрын
My bike is almost as well! I’ll have it up on my channel in a bit! Cant wait to see where you your bike goes! Been watching a while now and when you recommended the Motorwitch bars I did the same ones on my previous RGS. Now with my ST I’m going more performance bagger. Good content as always!
@KT-GoNavy Жыл бұрын
Great video. I ordered the same kit and getting started later next week. Hope to see you in Daytona.
@twistieslayer3592 Жыл бұрын
This video was super helpful. Thanks
@ELEV8R405 Жыл бұрын
Looks fantastic! 🔥
@AmpedUpJoe Жыл бұрын
Bars look sick!!!
@welderup6669 Жыл бұрын
GR8 VIDEO THANKZZZZ FOR SHARING!!!
@daleclarkjr Жыл бұрын
Dam that came out sick!! 🤙🏽
@breezetelemaster1368 Жыл бұрын
Absolutely Awesome!
@curtislink Жыл бұрын
Nice clean job !!
@robertmercurio2859 Жыл бұрын
Great video looking at doing same install want to hear your ride review! Thank you for great video!
@shotgunshowdown1827 Жыл бұрын
Thank you for sharing this video
@SonVu-zj8bk 8 ай бұрын
Thanks for the video! Just order the same parts! Regards from the Netherlands 🤙
@super1234567891011 6 ай бұрын
Gorgeous bike!! I am considering the 22’ Road Glide ST since it has most of what I want already.
@roadglide1142 Жыл бұрын
Looks Dope ! 🤙
@wikee25 Жыл бұрын
Bro you’re gonna love em! I’m 6’3” have the 6.5” pull backs and mid bend bars and I love it.
@Khow-oy3vp 7 ай бұрын
I know this is an older comment but hopefully you see it. Are your risers mounted in the close or far holes on the top tree? Do you feel stretched out at all? I'm 6'2" and thinking I need to go with the 6.5"
@HvyMetal4Ever Жыл бұрын
Had I not gone with the Motorwhich bars, that was going to be the setup. I'm diggin the Motorwhich bars. Running the cables thru the bars was a pain in the nuts, but I'm liking them so far. Good feel, good control I have the bike sitting in the garage right now with the exhaust ripped out. Looking to install the new header and mufflers today.
@DOOWORKPRODUCTIONS Жыл бұрын
Yeah running the wires through the motorwitch bars was not fun!
@2147crew Жыл бұрын
Looks great.
@jasonkimble8926 Жыл бұрын
Looks good. ⚡️
@jasonkimble8926 Жыл бұрын
Go get that belt in Florida! 👀
@michaelallen9784 Жыл бұрын
I went with Kraus on my 22' ST. The best upgrade you can make if you don't mind spending the money!!
@jjpro20021 Жыл бұрын
What size riser did you go with and how tall are you? I’m kinda confused I’m 6”1
@MrRisete Ай бұрын
Very nice setup, looks amazing. I'm going to do the same with my 2019 RG, but I don't know what lines (clutch, throttle, brakes and manual control switches) you used, could you give me the information or did you use the stock ones?
@MyFatherLoves Жыл бұрын
I’m pretty sure I like the aesthetics of Thrashin’ the most but with the fact that they have no bushings *anywhere*, I can’t see myself getting them. Probably going to go with Kraus instead. The hard mount at the triple tree with the bushings right under the bar seems like the Goldilocks.
@jeremycordre8371 Жыл бұрын
Looks good! Dude when did you get the 5.0 mustang? Do a vid on it too!
@DOOWORKPRODUCTIONS Жыл бұрын
I got that late in the season last year - I will definitely have content with that this spring / summer! It's twin turbo - makes over 1,000HP lol
@orli2940 Жыл бұрын
Great video, the bars look amazing on ur RG can’t wait to read ur review on how the new install/steering handles, did u use the stock cables with the new risers?
@DOOWORKPRODUCTIONS Жыл бұрын
Yes, you can run stock cables with this setup!
@orli2940 Жыл бұрын
Great… once again the video installation & the way those risers/handle bar looks on ur RG makes ur RG look unique enjoy them & ride safe
@elprimojoey 2 ай бұрын
I appreciate you video big homie. I just got most of my parts in for this set up. As I opened the gauge relocation box, I attempted to to piece them together as a mockup but noticed they didn’t completely flush together. Is it because the gauges and fast keys weren’t in or is there a fault to it? Not sure if you remember when you did yours or your boys bar set up. Again, thank you for this informative video! Keep up the good work!
@DOOWORKPRODUCTIONS 2 ай бұрын
The gauges fit tight in the carbon fiber housing. Try pressing in on the edges to get the carbon to fit inside the billet bezel piece. both ones I did were very tight, but they will fit flush. Try putting the screws in first too.
@tmontana213 Жыл бұрын
Ordered this setup with an LP6 and S1 light kit. All the parts are just waiting. Just need a couple days off to install everything
@TaylorOriginal127 4 ай бұрын
Can you do a updated video on the bars on how you like them and everything
@barbercvo_19 Жыл бұрын
I’ll be in Destination daytona at the Harley. March 5th from 1 to 3pm meet and greet at the Khrome werks rig And I’ll be back march 10 at the let’s roll station hope to u see u then.
@DOOWORKPRODUCTIONS Жыл бұрын
I'll come see ya!
@duffy1298 Жыл бұрын
Bout time!
@ehiggins7476 Жыл бұрын
What did the wires you tucked in the fairing control?
@DroneQuest181 Жыл бұрын
I’ll be in Daytona, I’ve been following your channel for quite a while now, it would be cool to meet up.
@DCV65 Жыл бұрын
Yeah that looks the goods. Been playing with that idea for a while, it's over a 2k set-up here in Aus just for the parts, our dollar sucks balls. But I keep coming back to it and it's looks great, looking forward to your thoughts on how it all feels.
@DOOWORKPRODUCTIONS Жыл бұрын
Yeah, it definitely isn't a cheap mod! It cost us $2,400 here in the US for just the parts too.
@DCV65 Жыл бұрын
@@DOOWORKPRODUCTIONS, yeah sorry, I pressed 2 instead of 4k plus $700 shipping. I currently run 12inch Burleigh bars on mine and the 9.5 pull back riser and mid bend bar works out at a similar maybe a touch taller? I definitely like the adjustable gauge relocation, like you, I don't want any interference with the screen.
@DOOWORKPRODUCTIONS Жыл бұрын
@@DCV65 Wow, that's just insane!
@DCV65 Жыл бұрын
@@DOOWORKPRODUCTIONS, yep, that's why it's not done yet. Was good when our dollar was on par with yours years ago, but it's hard to justify on a set of handlebars. That's a lot of fuel and tyres.
@brooklyncvo7525 Жыл бұрын
I have a cvo roadglide ultra I just ordered my setup in chrome without the tree mount. I’m leaving the gauge in stock spot for now. But they recommended I go with 6in pull back risers and high bent bars I hope I didn’t make a mistake
@DOOWORKPRODUCTIONS Жыл бұрын
Just did that setup on a friends bike - It feels about the same as my setup. So you will be alright.
@brooklyncvo7525 Жыл бұрын
@@DOOWORKPRODUCTIONS ok great.
@user-vw7qe1cf9x Жыл бұрын
Another great video. I have missed your updated bike videos. What is the rise and pull back on these? 12" rise and 4-inch pullback?
@DOOWORKPRODUCTIONS Жыл бұрын
9.5" Rise - 2" pullback.
@user-vw7qe1cf9x Жыл бұрын
@@DOOWORKPRODUCTIONS thanks for the quick reply. very helpful as I also have a RGS.
@user-vw7qe1cf9x Жыл бұрын
@@DOOWORKPRODUCTIONS i know u do your own work but whatr cou;d one expect to pay for paryts...and how much for labor?
@alex-ll7bx Жыл бұрын
Nice
@tommiller8714 Жыл бұрын
Like the setup and specially since the gauges can be set so as to not block the main screen! I have a new '23 RG ST and have been looking around, researching what setup I'll go with. I have the SE/Ohlins Rear Shocks on already and am looking at the recently released fully adjustable front suspension kit from RWD...so I would want easy access to the adjustments (which it looks like the T/C setup on your RGS would provide). Total cost (without taxes, any shipping, and of course Labor)? Thanks!
@DOOWORKPRODUCTIONS Жыл бұрын
This setup costs around $2,400 just for parts. I'm not sure how much labor would be as I do all the work myself.
@tommiller8714 Жыл бұрын
@@DOOWORKPRODUCTIONS Ok, thanks for the pricing info. on this T/C setup. As always, looking forward to your future videos.
@JasonRidesmoto 5 ай бұрын
What year is that bike? Very cool
@bkimball9590 3 ай бұрын
Another great video! Question on the ODI grips, how are they on hot days, do they make your hands sweat more being all rubber? Thanks
@DOOWORKPRODUCTIONS 3 ай бұрын
No, they do get a lil sticky tho..
@bkimball9590 3 ай бұрын
@@DOOWORKPRODUCTIONS Thank you appreciate the quick response, looks like ya still running them so must be worth a lil sticky :) great content my man, well done!
@billgreathouse1810 Жыл бұрын
Bike looks killer. Is that a tank badge or a decal? Thanks
@DOOWORKPRODUCTIONS Жыл бұрын
It is a decal. Thanks!!
@kq9l115 11 ай бұрын
Awesome vid! Can you comment on how the reach is with the new TS bars vs Motowich? I just installed my Motowich bars and feel just slightly too streched forward and am considering the TS set up. Thanks. RR
@DOOWORKPRODUCTIONS 11 ай бұрын
The thrashin bars are 10x more comfortable. They come back further to you than the motorwitch bars.
@roverrich 10 ай бұрын
@@DOOWORKPRODUCTIONS thanks for the info and for taking the time to reply!
@freeride6441 Жыл бұрын
It's about time you put Thrashing products on your bike great stuff..
@RICKYRUSH Жыл бұрын
What are you using for gauge backlighting? Looks great
@DOOWORKPRODUCTIONS Жыл бұрын
GaugeModz! gaugemodz.com/?gclid=CjwKCAjw586hBhBrEiwAQYEnHVkjOxNGyD6V2EIv6izgfFnOmEUOysCocmFgjHjY_aLyT62vnDfIkBoCXIIQAvD_BwE
@Motorsport_Mike43 Жыл бұрын
the setup looks FREAKING AWESOME!!!!! cant wait to see you guys tuesday @RayC'sHDofLapeer
@dynaflat72 Жыл бұрын
I’m new to riding so don’t kill me on this comment but what’s the benefit of these bars over stock bars or the traditional 12 or 14 inch bars?
@bradleyb5021 Жыл бұрын
Anyone know if you need to buy longer brake cables or wiring for switches?
@thunderr7.521 Жыл бұрын
You paid quite lot of money for that kit. if am in a position to pay this amount, I would go with Kraus Tbars Setup. Congrats on the new mod. I still need your input of the fxr division and your height and your review after riding them for some good time because they are within my budget. I have OCD, I cant have real tbars and look inside to the triple tree and the void that leave without the factory odometer setup.
@DOOWORKPRODUCTIONS Жыл бұрын
The motorwitch bars were uncomfortable on long rides.. They were also very narrow.
@paulg5835 Жыл бұрын
I know this is off topic. But have you ever ridden a bike with the ohlins progressive rear spring on your setup compared to the linear that you have on your bike.
@DOOWORKPRODUCTIONS Жыл бұрын
No, I haven't.
@zachotto7658 Жыл бұрын
Where did you get the tank center piece and gas cap? I've been looking everywhere for something like that.
@DOOWORKPRODUCTIONS Жыл бұрын
Amazon
@lukepaso1993 Жыл бұрын
Looks like a huge job compared to just doing a factory 47 install etc😅 ive done it and can definitely say it was tricky but would not be comfortable trying this.. Never the less good job how are you liking it?
@DOOWORKPRODUCTIONS Жыл бұрын
Love them! Best bars I've had thus far.
@r6erbuyafool Жыл бұрын
Can you do a video if you haven’t already on that shift light please?
@DOOWORKPRODUCTIONS Жыл бұрын
I did already - here you go! kzfaq.info/get/bejne/r7BmZdyg2cW0XXk.html
@joshuadearnley466 9 ай бұрын
Just priced it out not to bad
@tommyboy55901 Жыл бұрын
Towards the end of video you said you had to pull the unused wires back into faring. What were these wires hooked up to that now you no longer need?
@DOOWORKPRODUCTIONS Жыл бұрын
These are the 2 wires/connectors that are plugged in the back of the factory plastic gauge cluster housing. They are used if you have any auxiliary switches mounted there for either air ride, center stand, lights etc..
@Forbidden-po8ey Жыл бұрын
What bar did you start with!? Kinda like those
@DOOWORKPRODUCTIONS Жыл бұрын
FXR Division Motorwitch Bars.
@johnsebolka4351 Жыл бұрын
Hey man was wondering out of the different handlebar setups you have done on your road glide which one has brought them closest to you .
@DOOWORKPRODUCTIONS Жыл бұрын
My latest Bar setup. The Thrashin T Bars..
@johnsebolka4351 Жыл бұрын
That’s what I was guessing. I’m 5’7” and have the HD 9.5 chiseled bars on my 23 road glide st and they have me leaning forward uncomfortably and low speed turning reaching out a bit too far. I don’t want to make another costly mistake on bars. I’m in Shelby Twp . Would be great if I could check out your bike , what are your thoughts
@tristonbroome5801 7 ай бұрын
Stupid question but can I configure the gauges on the riders side of the bars rather than radio side before I order everything
@DOOWORKPRODUCTIONS 7 ай бұрын
No
@davidmatias6239 Жыл бұрын
What made you choose the Thrashin vr Kraus setup ?? I’m undecided which way to go for my bike
@DOOWORKPRODUCTIONS Жыл бұрын
Fit and Finish on the Thrashin Parts are much nicer, I like the Top Tree with the hidden fork lock. Also love the gauge relocation kit on the Thrashin setup - it doesn't block the view of the screen at all.
@kencampos1170 Жыл бұрын
@@DOOWORKPRODUCTIONS I totally disagree. Actually its the opposite, fit and finish on the Kraus is much nicer. Thrashin is nice just a little more unrefined.
@juanvalles8968 Жыл бұрын
Nice video … one question your old handlebar was 12” now the Trashin it’s 9.5” the raisers + 4.5 the mid bend handlebar so it’s now 14” correct me if I’m wrong , is it ok I mean there is not a big difference? Thnx
@DOOWORKPRODUCTIONS Жыл бұрын
It's still about 12" tall overall.
@juanvalles8968 Жыл бұрын
@@DOOWORKPRODUCTIONS thnx for reply
@DennisMerwood-xk8wp Жыл бұрын
@@DOOWORKPRODUCTIONS Pair of really nice handlebars - ruined by these dumb risers. More work to change the bars than it used to take us to change our whole engine in an old Triumph back in the day.
@ghostgr43 7 ай бұрын
I’m wanting to do this same setup, you mentioned you were a shorter rider so you put them closer to you. I’m 5’11” on a good day(spine injury) but shrank to 5’10”. I’m curious what your height is to reference bar position?
@ghostgr43 7 ай бұрын
Also are your brake and clutch cables stock length?
@DOOWORKPRODUCTIONS 7 ай бұрын
I’m 5’7. My cables are stock length.
@ghostgr43 7 ай бұрын
@@DOOWORKPRODUCTIONSthanks!
@BourbonBagger Жыл бұрын
did you ever put your LidLox back on? i did Tbars but am now looking for another solution for a helmet lock since the LidLox in my opinion kinda ruins the look of the half clamps now.
@DOOWORKPRODUCTIONS Жыл бұрын
Yes, I still put my lidlox back on, however I am with you on that. It takes away from the billet contrast cut perch clamps.
@BourbonBagger Жыл бұрын
@@DOOWORKPRODUCTIONS sounds like one of us needs to "invent" another option.
@DDeCesare63 Жыл бұрын
What do you use for a torque wrench?
@DOOWORKPRODUCTIONS Жыл бұрын
Harbor Freight Special lol Pittsburgh
@stevesalazar1763 7 ай бұрын
Does this setup require longer brake and clutch lines ? I’m running a 12 in apes on my 2020 road glide that did not require me to put longer lines.. so just wondering
@DOOWORKPRODUCTIONS 7 ай бұрын
No it does not require longer lines!
@stevesalazar1763 7 ай бұрын
Thank you! @@DOOWORKPRODUCTIONS
@alabiggy 4 ай бұрын
What did you do with the old bars?
@DOOWORKPRODUCTIONS 4 ай бұрын
Sold them.
@ronbranum4134 Жыл бұрын
What windshield are you running
@DOOWORKPRODUCTIONS Жыл бұрын
Klockwerks 6"
@drainmonkeys385 Жыл бұрын
OK but are you going to cover up access to your infotainment screen?
@DOOWORKPRODUCTIONS Жыл бұрын
Nope, that is why I went with this setup. The gauges do not block your screen!
@SharkLifeSean Жыл бұрын
Can you confirm …those pins that Harley has restricted movement on the factory bars you just hammer those Down with a punch ? Asked my dealership to move my bars up and they said they can’t due to the pins but yet I see yours are not there. Just curious thank you in advance
@Motorsport_Mike43 Жыл бұрын
alot of people will shave the pin off
@DOOWORKPRODUCTIONS Жыл бұрын
Yes, you can just use a punch and hammer it down. Super easy to do.
@SharkLifeSean Жыл бұрын
@@DOOWORKPRODUCTIONS thank you.
@SharkLifeSean Жыл бұрын
@@DOOWORKPRODUCTIONS no one ever talks about that part in install videos lol is it just one pin ? What did you do with your chizled bars from Harley ? I was thinking about ordering a pair. Thank you again
@DOOWORKPRODUCTIONS Жыл бұрын
@@SharkLifeSean Yes, just 1 pin. I sold my Chizled low bars.
@jfan2z 4 ай бұрын
You have 100+ comments but did you sell your old bars?
@DOOWORKPRODUCTIONS 4 ай бұрын
Yes, I did..
@jasoncahoon553 Жыл бұрын
What size wire loom did you use for this? Thanks
@DOOWORKPRODUCTIONS Жыл бұрын
Not sure - It came with the kit from Thrashin.
@jasoncahoon553 Жыл бұрын
@@DOOWORKPRODUCTIONS no shit?!
@DOOWORKPRODUCTIONS Жыл бұрын
@@jasoncahoon553 Yessir
@Voge21 Жыл бұрын
Why did you switch? I have the same setup as you did.
@DOOWORKPRODUCTIONS Жыл бұрын
Because I wanted to try something different - and I really liked the fit and finish of the Thrashin setup.
@Voge21 Жыл бұрын
@@DOOWORKPRODUCTIONS look good bubba
@jessedemayo4883 Жыл бұрын
Check out official Mac down there bring a belt!!!!
@DOOWORKPRODUCTIONS Жыл бұрын
Oh we have been talking... Stay tuned for Wednesday's video 😎
@jessedemayo4883 Жыл бұрын
Watch out he’s quick he’s running over 140 hp
@stevenoswalt3569 Жыл бұрын
What are you doing with the other bars
@DOOWORKPRODUCTIONS Жыл бұрын
I sold them..
@RICHARDSHORT2 Жыл бұрын
I have a set of the FXR DIVISION MOTORWITCH BARS 12” if you’re interested. $200
@frankhabib5748 Жыл бұрын
I didn’t see where the new fork lock was.
@DOOWORKPRODUCTIONS Жыл бұрын
It's hidden behind the little sliding door.
@matthettick2403 4 ай бұрын
You will need a cvo flash from a dealership if you delete your original key when doing the top tree.
@RB-tx4mn 11 ай бұрын
"Alright guys..."
@francescosorrentino1559 Жыл бұрын
Nice but very expensive.
@johnmclaren1666 Жыл бұрын
If you want to sell your FXR bars hit me up.
@DOOWORKPRODUCTIONS Жыл бұрын
I actually already sold them! Sorry!
@RICHARDSHORT2 Жыл бұрын
John, I have the same FXR bars that I’m selling if you’re still interested
@johnmclaren1666 Жыл бұрын
@@RICHARDSHORT2 I went another route, but thanks
@johnvanzelm2307 Жыл бұрын
Damn your channel, you cost me so much money.
@DOOWORKPRODUCTIONS Жыл бұрын
🤣🤣🤣
@OnlyGainsPR 4 ай бұрын
made in south america... lol jk
@sabraitis Жыл бұрын
Honestly… I don’t get it. Looks like it doesn’t fit. Parts look solid and I guess if you like it its awesome. Just not for me.
@DOOWORKPRODUCTIONS Жыл бұрын
They're not for everyone.
@orli2940 Жыл бұрын
To each, their own
THRASHIN SUPPLY
Рет қаралды 98 М.
Road Glide Ryan
Рет қаралды 5 М.
Old Not Dead
Рет қаралды 608 М.
Moto Head Kyle
Рет қаралды 24 М.
DOOWORK PRODUCTIONS
Рет қаралды 127 М.
ANIHASH
Рет қаралды 1,9 МЛН
Mac 720S
Рет қаралды 2,7 МЛН