I Made The World's BEST RC Tool!! (You Can Too!)

Рет қаралды 5,547

5 ай бұрын

The NoCry Driver is an awesome tool for working on your Traxxas, Arrma, Redcat, HPI or Team Associated RC Basher in 2024. Let's make it even better!

Пікірлер: 427

@joemomma707 5 ай бұрын

My man!!!!!! I’ve been searching for the best power tool for RCs!!!! Another banger to the list!!!! Best RC youtuber out there! I’m only a minute and 18 seconds in and I already got amazing info on what hits to get!!!! I have hand MIP screw driver at (3 piece) and it is amazing. I wouldn’t go cheap on this. I am new and don’t know when to stop tightening. If I had cheap ones, I would have stripped something by now. Thank you for all of your amazing help!!

@DoRC 5 ай бұрын

You're welcome thanks for watching!

@RoostedFilms 5 ай бұрын

Im glad Im not the only guy out there that just has to take everything apart to see how it all works 😆 Awesome mod.

@DoRC 5 ай бұрын

I'd say it's the mechanic in me but I've been taking things apart since I was a little kid. My mom has a story where she put me in a crib left for a little while came back and I was in a pile of crib parts on the floor. Not sure if I believe it but it's still a fun story :-)

@RoostedFilms 5 ай бұрын

@@DoRC now that's funny 😄

@moto4x4adventure9 4 ай бұрын

Wow, definitely the best 'tools' vid for RC on KZfaq. You go into so much detail and explain everything. Thank you from Australia 🇦🇺 for making this vid, i just ordered almost all the tools. I started looking for a Makita driver and ended up with the nocry. Hopefully my Aarma Kraton 4S v2.5 comes with the wheel tool 👍

@DoRC 4 ай бұрын

Thanks Glad you enjoy! Let me know what you think of the driver

@troypye2762 5 ай бұрын

That's a very good mod to make wrenching easier. Love all your vids. You do a great job explaining things to help the less experienced RC'ers.

@DoRC 5 ай бұрын

Glad you enjoyed and thanks for watching!

@couger3p 5 ай бұрын

Love your videos! You make everything short sweet and to the point. I dont have to invest a half hour to learn from your content. I dont find myself skipping ahead in your videos, but more often, rewatching parts to see exactly how you did things. Thanks for all the help and reveiws!

@DoRC 5 ай бұрын

Yeah I don't want to waste anybody's time. Unfortunately KZfaq penalizes short videos so I have to keep them at least a certain length but I think I put as much information in there as possible.

@lyricofwise6894 4 ай бұрын

I like these vids showing what tools one will likely need for the hobby for beginners

@DoRC 4 ай бұрын

Yeah people that have been in the hobby for a while probably already have most of these things but still good to know!

@bigtrev71 5 ай бұрын

Thanks for the vid. Always good to get good tips from others about tools

@DoRC 5 ай бұрын

Thanks for watching :-)

@stevenkelby2169 4 ай бұрын

Resourceful genius, I love this idea. Haven't got one yet but will eventually. Thanks! 🍻

@DoRC 4 ай бұрын

A power driver is a game changer. I definitely recommend one!

@smitheshn6637 4 ай бұрын

Cool modification... and thanks for the giveaway!

@DoRC 4 ай бұрын

You're welcome thanks for watching :-)

@MichaelGraves-re6uv 5 ай бұрын

Thanks for sharing how to modify the driver. If I don't get lucky and win the one you're giving away, I'll try it.

@DoRC 5 ай бұрын

You're welcome sounds good I'll be doing the drawing soon!

@toolbaggers 5 ай бұрын

I like your audio and how you speak nice and clear.

@DoRC 4 ай бұрын

Thanks I'm glad you enjoy!

@Musiquence 5 ай бұрын

Good tips about what tools to use. Would like to add a 1.5mm hex for grub screws (in pinions).

@DoRC 5 ай бұрын

Yeah in my opinion the smaller the tip the more important the quality is.

@Musiquence 5 ай бұрын

@@DoRC yeah, I agree. I have Hudy tools and they are great. Haven’t found good quality hex bits. Will look for those MIP’s you showed in your video.

@DoRC 5 ай бұрын

@Musiquence they are the best. They're on Amazon.

@Blimpus 5 ай бұрын

Oh I definitely need that bad boy for sure! moding the tools, gotta love it!

@DoRC 5 ай бұрын

Modding is fun!

@TheBiteSize 5 ай бұрын

Almost bought the Milwaukee m4 driver. This seems like a legit option thanks for sharing

@DoRC 5 ай бұрын

Yeah this is a good one even without the mod it's really nice for most applications.

@slebdad 4 ай бұрын

Nice mod, good video for beginners for the needed tools.

@DoRC 4 ай бұрын

Thanks! I'll be doing the giveaway very soon :-)

@allensanguinetti4708 4 ай бұрын

Great mod fix will have to look into that driver for my rc repairs

@DoRC 4 ай бұрын

It's definitely a good one!

@cozy_Fozy 5 ай бұрын

Great video to share with everyone. Long before I stepped upto the Dewalt, I performed a similar modification to an Amazon Genesis power screwdriver, the clutch pack on that one had multiple shims under the spring, I removed two if I recall, and had the same end results on the low torque side, but that driver wasn't near as strong on the high torque settings as the one you show here! I'll take a look at the link in the description since you mentioned that it's even stronger than the Dewalt gyro w/clutch that i currently use!

@cozy_Fozy 5 ай бұрын

My bad, I thought you had a link to the Amazon page..

@DoRC 5 ай бұрын

Hey sorry I usually don't do links. I don't be able to think that I'm selling anything and links changed too frequently. But yes as far as my own experience goes and testing that project farm did the no cry has about 50% more torque than the DeWalt gyro.

@cozy_Fozy 5 ай бұрын

@DoRC I got ya, that make sense. I found the nocry page, that's a good deal for sure! I'll check out that video too, I enjoy a good ole project farm comparison test every once in a while, lol. Have a good one my guy!

@DoRC 5 ай бұрын

@cozy_Fozy thank you too :-)

@itzjoeylo4501 5 ай бұрын

Wow Nice 👍 Driver… Great Content

@DoRC 5 ай бұрын

Glad you enjoyed thanks for watching :-)

@adrianramos2689 2 ай бұрын

Great video,I have been using the Hyper Tough 4V Max Lithium-Ion Cordless Rotating Power Screwdriver 1/4 inch Size with Charger, Rotating Handle, LED Light, Magnetic Bit Holder & Bits from Walmart for few years now and is amazing,never damaged any plastic of my cars and is only $14.97!!!

@DoRC 2 ай бұрын

Nice! Have you used it on really small screws like on the Grom?

@adrianramos2689 2 ай бұрын

@@DoRC Yes I used it in an Axial 1/24 Deadbolt without any problem.Thanks

@DoRC 2 ай бұрын

@@adrianramos2689 Nice! Yeah most drivers are either too powerful for small screws 2 week for the biggest screws or both. Good to hear there's an alternative to modification of mine

@adrianramos2689 2 ай бұрын

@@DoRC You did a great job with yours.

@johnellefa 5 ай бұрын

I need to get me some of those shock tools. Great video as usual

@DoRC 5 ай бұрын

It's a tool that's often overlooked in this hobby but one that really comes in handy.

@stewartj1998 5 ай бұрын

Great video, I want one of those divers now!

@DoRC 5 ай бұрын

I'll be giving this one away soon!

@nevrxhale9660 5 ай бұрын

Definitely need those MIP ball drivers

@DoRC 5 ай бұрын

Yeah mine don't get used super often but when you need them you need them. There's been plenty of times where I've been able to avoid taking a bunch of stuff apart by having them.

@randythompson1723 4 ай бұрын

Thanks for the video. I'm sure it's very helpful to someone getting into the RC hobby. 💯💯💯

@DoRC 4 ай бұрын

Absolutely! It's always good to know what tools you need :-)

@ShawnMoreland317 4 ай бұрын

I subscribe to several rc channels, but I love the way you take the time to explain things in an easy to understand manner, and give us little hacks and tips to make maintaining your cars easier. Work smarter not harder as I always say. Keep up the awsome work brotha.

@DoRC 4 ай бұрын

Thanks man Glad you enjoyed!

@Moyersteven1 4 ай бұрын

Love the channel. Been watching and keeping up for some time now. Id love one!

@DoRC 4 ай бұрын

Awesome I'll be doing the drawing soon!

@VictoriaJones-gy8es 5 ай бұрын

Ive been using the same tools for years, and still havent got myself a decent power driver lol Good video👍

@DoRC 5 ай бұрын

I'd highly recommend getting one. It's really a game changer. You can do maintenance and repairs in literally half the time.

@mtolsen321 5 ай бұрын

Nice mod. Thanks for sharing.

@DoRC 5 ай бұрын

Glad you enjoyed thanks for watching :-)

@eddiemuniz6563 4 ай бұрын

Just getting into the rc world. Love the videos 🤙🏽

@DoRC 4 ай бұрын

Glad you're enjoying lots more coming!

@wescaudle5944 5 ай бұрын

Thanks for sharing this mod.

@DoRC 5 ай бұрын

Thanks for watching! Drawing will be soon :-)

@3DAbilities 5 ай бұрын

The No Cry Drill is awesome. Got mine around 3 years ago. Great and effective. I think project farm did a video comparing them and that one came out on top. Only downfall is the custom cord to charge.

@DoRC 5 ай бұрын

Yeah they did. It had 50% more torque than the DeWalt version and is definitely an awesome driver. The custom cord is kind of annoying but I'm willing to accept it for how good the driver is especially after modification.

@curbynet 4 ай бұрын

torque test is another good comparative review channel for tools

@DoRC 4 ай бұрын

@@curbynet For sure! They really get technical and are still entertaining.

@williamstewart9218 4 ай бұрын

Awesome idea man people on this hobby are so creative and helpful thanks for the ideas on the bits, channel locks, and most importantly the driver can't wait for my videos

@DoRC 4 ай бұрын

Glad you enjoyed. Modifying stuff is definitely one of the best parts of this hobby!

@ComputersHowtos 4 ай бұрын

Nice modification of the tool. Good to know.

@DoRC 4 ай бұрын

Yeah it works really well especially on small screws like that are on the new omni Terminator.

@herseydimnd 5 ай бұрын

Great tip! Thank you for sharing how to modify the driver. 🙂

@DoRC 5 ай бұрын

Thanks for watching Glad you enjoyed!

@MrGoldmember2 5 ай бұрын

Love your content sir. Another informative and entertaining video!

@DoRC 5 ай бұрын

Thanks Glad you enjoy :-)

@dutch1800 5 ай бұрын

MIP bits are the way to go, would love to have that NoCry for my fields box for sure.

@DoRC 5 ай бұрын

Yeah they are the best! The ones you saw in the video have many many hours of use on them and still basically look new.

@G35Jeesh 5 ай бұрын

Definitely need one of these! Tired of using my big drill lol

@DoRC 5 ай бұрын

Yeah the big drills are pretty good but not super convenient and I found that if you're not careful they'll actually spin fast enough to melt the threads in plastic under certain circumstances.

@chuzzwade288 5 ай бұрын

Nice. Would love to win this (and the bits) 😊

@DoRC 5 ай бұрын

The MIP bits won't be included in this giveaway but I definitely recommend getting them!

@skree_fpv436 4 ай бұрын

I've been waiting for this video since you first mentioned it a while ago. Awesome mod! Good call about getting MIP drivers. I finally bought a set of MIP hex screwdrivers after I got sick of stripping screws. I've learned that when it comes to tools, don't go cheap. Get the best ones you can afford.

@DoRC 4 ай бұрын

Mip is definitely the way to go!

@lucapoehland1958 5 ай бұрын

Definitely gonna get one of those shock tools I can’t tell you how many times I’ve damaged shocks trying to fix them

@DoRC 5 ай бұрын

Yeah one of those tools that you won't understand how you live without once you get one.

@FlailinMonkey 5 ай бұрын

Awesome fix to make that driver better for RC repairs. I like that you gave some good general rc tool recommendations as well as the tips for starting/finishing installing bolts back in by hand. I'll be saving this video for future use to mod my own driver if needed in the future. 😁

@DoRC 5 ай бұрын

Awesome glad you enjoyed :-)

@DoRC 5 ай бұрын

Awesome glad you enjoyed :-)

@cwatson42785 4 ай бұрын

Shock pliers are definitely a must have! When i first got them i couldn't believe how easy it makes things. I have the small skil brand driver but doesnt have a clutch but the nice thing is i just turn it by hand (no power) with the driverb when im loosening at first or to tighten at the end i just go limp wrist where my wrist will just twist a bit and i stop power. I'll have to check these ones out as i like the clutch. Sometimes ill just use my dewalt drill or impact but obviously those are bigger and bulky

@DoRC 4 ай бұрын

I also went years without shock pliers. Seems kind of silly in retrospect. This driver definitely hits the sweet spot between power and usability in the hobby. Thanks for watching!

@brothertax 5 ай бұрын

milwaukee m12 electric screwdriver has been my go to. I like the handle on yours.

@DoRC 5 ай бұрын

Yeah I've tried the Milwaukee one in the past The only thing I didn't like about it was that it doesn't quite have the torque to break free really stuck larger bolts. This thing will literally twist your arm off if you're not careful.

@brothertax 4 ай бұрын

@@DoRC I haven't needed that extra "nut bustin' torque" yet. Sometimes I'll physically twist the drill if I need more, might not be good for the bits.

@DoRC 4 ай бұрын

@@brothertax yeah the no cry can be pretty violent but the MIP bits have held up to it so far.

@jasonbrickman8065 4 ай бұрын

Great Video!

@DoRC 4 ай бұрын

Glad you enjoyed and thanks for watching :-)

@vsci79 4 ай бұрын

Nicely done and thanks for sharing!

@DoRC 4 ай бұрын

Glad you enjoyed thanks for watching :-)

@steveoarehero 5 ай бұрын

Milwaukee 2505-20 drill/driver hands down the best.

@DoRC 5 ай бұрын

Looks like a beast but does it go down to basically zero torque on the clutch? Can you install m 1.5 screws into plastic without stripping them?

@steveoarehero 5 ай бұрын

@DoRC it's got torque settings I always keep it on level 2 , haven't stripped anything on my limitless or talion.

@DoRC 5 ай бұрын

@@steveoarehero yeah most drivers are fine for 1/8 scale vehicle screws. It's the little ones on something like a grom or other 1/16 scale vehicles that our problem. Even some smaller 1/10 scale screws can easily get stripped by most drivers even on their lowest torque setting.

@ReactionRC 4 ай бұрын

Another great video my friend! 👍 You always have great tips and tricks for us in the RC community and I thank you! 🙏

@DoRC 4 ай бұрын

You're welcome!

@Ben13507 5 ай бұрын

looks sick. thanks for the helpful video

@DoRC 5 ай бұрын

Glad you enjoyed and thanks for watching!

@Kapharnaum92 5 ай бұрын

Great advice! I have learned something today

@DoRC 5 ай бұрын

Glad you enjoyed and thanks for watching!

@MakkeVr 5 ай бұрын

Awesome tip, thanks!

@DoRC 5 ай бұрын

Glad you enjoyed and thanks for watching!

@DRIFTSUN 5 ай бұрын

keep up the good work. hi from Tasmania!

@DoRC 5 ай бұрын

Hi and thanks for watching!

@DRIFTSUN 5 ай бұрын

cheers for reply! nice driver!@@DoRC

@Powerkingdomrc 5 ай бұрын

Love the video I've actually seen these power screwdrivers on Amazon never knew you could modify them. Thank you for the opportunity to win one from one of the best RC channels on KZfaq!!!

@DoRC 5 ай бұрын

Yeah the mod isn't too difficult but definitely better to win the one I do! Thanks for watching :-)

@fredboylstein8930 5 ай бұрын

Love your videos, thanks!!

@DoRC 5 ай бұрын

Thanks man Glad you enjoy!

@arq.andresfelipemoralesvar9593 4 ай бұрын

Cool tutorials! This tools is a great help, for new people to the hobby and for experienced ones too. Thanks for sharing this kind of content, very much appreciated and informative 😊

@DoRC 4 ай бұрын

Glad you enjoyed and thanks for watching!

@jgarcia690 5 ай бұрын

Great idea

@DoRC 5 ай бұрын

Thanks and thanks for watching!

@2XRC 5 ай бұрын

Been waiting on this vid for a bit 😂. Great hack! Appreciate your giveaway

@DoRC 5 ай бұрын

I've been waiting to make it. A ton of new things came out over the last few months which kind of pushed all my other videos back a while.

@AllInRc1971 5 ай бұрын

Very cool. I have the Worx version bit it got shelved forever for the Dewalt gyro hand screwdriver.

@DoRC 5 ай бұрын

The gyro screwdriver is good but in my experience it doesn't quite have the jam to free up really stuck larger screws. This one after the modification will go as gently as you want but will pretty much rip your arm off of you aren't careful

@L2theWcarscoffeelife 5 ай бұрын

That is what I always say in my vids let the driver do the bulk of the work tighten by hand the clutch is good but dont depend on it. I see why you recommend this its affordable and I like that, if you can swing the Milwaukee 2401 which the bare tool is the same price if you already have the m12 batteries it works out and its clutch is amazing and you can set it to full on drill for screwing into wood and that Like I said I appreciate you keeping it affordable I am all for that.

@DoRC 5 ай бұрын

I haven't messed with the 2401. I'll have to give it a try!

@L2theWcarscoffeelife 4 ай бұрын

@DoRC its a nice driver as much as this Dewalt fan boy hates to admit lol

@DoRC 4 ай бұрын

Sweet!

@rexwalker6962 4 ай бұрын

Genius Been looking for this modification!! Your Vids Rock!!!

@DoRC 4 ай бұрын

Thanks!

@brianzakaras937 5 ай бұрын

such a Great Idea on how to modify the driver!!!!! Thanks for sharing!!!

@DoRC 5 ай бұрын

Glad you enjoyed and thanks for watching :-)

@frederickgrassie3383 5 ай бұрын

That's a wonderful video, so informative. I have been looking for a driver that won't screw up my RC screws! This is it. Guess I'll have to order. And do the mod, NO CRY!!😢

@DoRC 5 ай бұрын

Glad you enjoyed. I'll be doing the giveaway soon. Maybe hold off ordering one until that happens in case you win :-)

@frederickgrassie3383 5 ай бұрын

@@DoRC last time I won anything was the US government draft, in 1970 draft card number 13! Off i went in summer of 71!!

@DoRC 5 ай бұрын

@frederickgrassie3383 well at least you won something :/

@rickroberts4848 4 ай бұрын

Great tip!

@DoRC 4 ай бұрын

Glad you enjoyed thanks for watching!

@2LocosRCing 5 ай бұрын

That's a cool mod, may have to pick one up.

@DoRC 5 ай бұрын

Yeah I've tried a bunch of different drivers and this one with the modification is my favorite. The only downside to it is it isn't the fastest driver at full speed but it's powerful enough to try to rip your arm off at full torque.

@raywagner3932 5 ай бұрын

Great video on the tools ppl mite want to get if they get in to this hobby

@DoRC 5 ай бұрын

Thanks Glad you enjoyed :-)

@Joshua19877 5 ай бұрын

I love your videos they are fantastic and I am not just saying that they are really helpful

@DoRC 5 ай бұрын

Thanks man I appreciate it!

@shawn6500 5 ай бұрын

Great video

@DoRC 5 ай бұрын

Thanks!

@jacobhenson3952 5 ай бұрын

Nice tips man. I would like to try that thing.

@DoRC 5 ай бұрын

I'll be doing the drawing soon :-)

@MagnifiedGiant 5 ай бұрын

Cool video. I own the Dewalt driver that has a gyro in it so you turn the drill to make it go in forward or reverse. The more you turn it the faster it will spin in that direction. It has very low torque settings that you can use so that it doesn't strip out screws. It was a pricy driver but it was worth it in my opinion. Always set the the torque low and finish by hand is the golden rule!! MIP bits are for sure a must have.

@DoRC 5 ай бұрын

The DeWalt driver is good. I've used them in the past. The only issue I have with them is that they don't really have enough to work on the top end to remove really stuck larger screws. This one after modification will install the smallest of screws without stripping and will try to rip your arm off at the highest setting.

@OGPAPERBOY77 5 ай бұрын

Same Ive had no issues with my dewalt I just adjust the torque setting for light use or heavy use Havent had any issues removing or installing screws

@DoRC 5 ай бұрын

@OGPAPERBOY77 yeah the DeWalt driver is good but I found that it doesn't quite have the power for really stuck large screws. Project farm did a comparison video with a bunch of different power drivers and the no cry came out on top with about 50% more to work than the DeWalt

@OGPAPERBOY77 5 ай бұрын

@@DoRC i havent had that issue and i use my dewalt on my real cars as well 👍

@DoRC 5 ай бұрын

@@OGPAPERBOY77 yeah it just depends on how stuck they are. Like I said testing showed that the no-cry has about 50% more torque than the DeWalt. The no-cry has enough torque that you wouldn't be able to hold on to it if it was shaped like the DeWalt.

@dinocarboneri1538 5 ай бұрын

Cool video 😎.

@DoRC 5 ай бұрын

Thanks and thanks for watching :-)

@jameslavoie6298 5 ай бұрын

That is slick 👍

@DoRC 5 ай бұрын

Definitely. I've been using the modified one for a while now and it works very very well.

@850RC 5 ай бұрын

I've got this same driver and absolutely LOVE it! A lot of power in a small package.

@DoRC 5 ай бұрын

Absolutely! Project farm did a comparison test of a bunch of different drivers and the no product came out on top for torque:)

@850RC 5 ай бұрын

I just watched the video, and it did very well. My wife would agree with PF it's a little loud if I'm working on a car while we're watching a tv show. That's one reason why I picked up the Dewalt Gyro Driver, quiet, powerful, and the clutch is very sensitive for delicate screws. I still use the NoCry daily just for the amount of power it offers for removing stubborn screws and tightening wheel nuts. @@DoRC

@SuperDrake79 5 ай бұрын

I was wondering what made yours preferable when modded. That’s a great tip for sure and all drills are not created equal so those number settings mean squat between brands. 😂 Keep up the awesome work, get out and bash!

@DoRC 5 ай бұрын

Yeah the numbers are essentially arbitrary. I really like this one after modding because you can turn it all the way down to basically nothing yet at full strength it's one of the strongest drivers available. Project farm did a comparison test of a bunch of different drivers that included this one and it came out on top for torque.

@chaddavis513 5 ай бұрын

Thank you for the great advice, tips and mods!

@DoRC 5 ай бұрын

Glad you enjoyed thanks for watching!

@kenoman742x 4 ай бұрын

Can never have too many tools. Nice mod.

@DoRC 4 ай бұрын

Agreed and thanks!

@chickenfist1554 24 күн бұрын

Nice mod. I've got one of the DeWalt 12v impact drivers which has a very gentle clutch. You can drive screws into plastic on about the 4-5th setting.

@DoRC 24 күн бұрын

Yeah the DeWalt is good though in my experience doesn't quite have as much power on the high end as this one does.

@chickenfist1554 23 күн бұрын

@@DoRC The DeWalt I have does up to 35 Nm apparently (DCF601D2-GB). I like the idea of this one though, so might have to find a use for one lol

@DoRC 23 күн бұрын

@@chickenfist1554 Yeah project farm has done a couple of comparison videos on these drivers and this one always comes out on top for maximum power.

@ryanhansen3350 4 ай бұрын

Great video! Been watching all your stuff lately!

@DoRC 4 ай бұрын

Thanks Glad you're enjoying!

@Desauce512 5 ай бұрын

Thank you for this video! Going to look into that soldering machine!!

@DoRC 5 ай бұрын

It's definitely a good one.

@RCPropaganda 5 ай бұрын

Thats a cool mod. I boight a cheap wally world electric driver and it had been great for my needs.

@DoRC 5 ай бұрын

Yeah pretty much any power driver is better than no power driver. I don't think I'd be in this hobby if I didn't have power tools :-)

@danielcase2189 4 ай бұрын

Great video. I'm just getting back into rc and really liked this video. Absolutely amazing hack that will help save a lot of plastic threads for ppl from stripping. Love the channel. Keep them coming.

@DoRC 4 ай бұрын

Glad you enjoy! Welcome back. What RC are you starting back up with?

@danielcase2189 4 ай бұрын

@@DoRC scx 10.3

@deadforfreeful 5 ай бұрын

Great tool!

@DoRC 5 ай бұрын

Definitely is!

@maltesrc 5 ай бұрын

That’s awesome 🤩

@DoRC 5 ай бұрын

I'm very happy with it. Thanks for watching!

@JohnnyFromCobraKai 5 ай бұрын

Great video and a very helpful modification.

@DoRC 5 ай бұрын

Glad you enjoyed. The drawing will be soon :-)

@jaypopsti 5 ай бұрын

I’ve tried many different power drivers from craftsman to dewalt to riobi and none of them are exactly what I am looking for. Maybe I’ll give the “no cry” a try 👍

@DoRC 5 ай бұрын

Definitely give it a try. I've run a lot of different drivers as well over the years and especially after modification this one's my favorite.

@powerband3328 4 ай бұрын

You can never have too many tools

@DoRC 4 ай бұрын

agreed

@awilde8815 5 ай бұрын

I have terrible hand function, this would be so handy

@DoRC 5 ай бұрын

Yeah even with good hands working on an RC car can be very tiring. Power tools help a lot!

@jacobarsenault5462 4 ай бұрын

I just bought a POPULO 4V Electric Screwdriver from Amazon, it seems ok but has a bit of a wobble that has me worried! I wish I would have seen this video first! It looks like I may need a replacement soon lol!

@DoRC 4 ай бұрын

Yeah there is some pretty sketchy ones out there. This one fortunately is reliable and durable. I've got hundreds of hours on the one I use everyday.

@jimloobey9335 4 ай бұрын

Ok, ya got me sold on this! Great mod 👍

@DoRC 4 ай бұрын

I don't think you'll be disappointed!

@TubeSurfer26 4 ай бұрын

Amazing modification. Thanks!

@DoRC 4 ай бұрын

Yeah it works really well!

@Jeckler 5 ай бұрын

You're like ChrisFix for RC.

@DoRC 5 ай бұрын

Well I was a professional mechanic for 20 years so I do have similar experience.

@tydymiler 4 ай бұрын

Pretty slick mod!

@DoRC 4 ай бұрын

For sure. It works really well!

@neilbradbury5975 5 ай бұрын

Nice to know thanks for te info ..🤙

@DoRC 5 ай бұрын

You're welcome and thanks for watching!

@wilderNS 5 ай бұрын

Really interesting modification, thanks for advice.

@DoRC 5 ай бұрын

You're welcome and thanks for watching :-)

@scottdemore959 5 ай бұрын

Great information. I'm new to the hobby and have been looking for a driver to use but haven't been able to figure out which one would be best. This video has been very helpful, and I would love to have one. Please keep me in mind when choosing your winner. Thanks 👍

@DoRC 5 ай бұрын

Will do. Even without the modification it's still a great tool. You just have to be careful with smaller screws. It's got a lot of power

@Limitless_Potato 5 ай бұрын

Good advice as always! I was just looking at the ryobi one

@DoRC 5 ай бұрын

Check out the driver comparison on project farm. He's got a bunch of them on there and you can see how the no cry stacks up against the rest of them

@Limitless_Potato 4 ай бұрын

@DoRC wow it's impressive! Hope I get lucky enough to win!

@AndresPenagos-jn8os 4 ай бұрын

Awesome video thanks

@DoRC 4 ай бұрын

Glad you enjoyed thanks for watching!

@JPRC_CRAZINESS 5 ай бұрын

Upgraded drill💪🏻awesome let’s go😎

@DoRC 5 ай бұрын

Heck yeah thanks for watching!

@afronegro791 4 ай бұрын

Great tips will be trying this one one of my drivers

@DoRC 4 ай бұрын

Can't guarantee a mod will work with other brands but as long as they're designed the same it should.

@Cossworth77 5 ай бұрын

Cool video could do with one of these would definitely save me a lot of time

@DoRC 5 ай бұрын

Glad you enjoyed and stay tuned the giveaway will be soon!

@joebobrc1504 4 ай бұрын

Great video and modification on the driver.

@DoRC 4 ай бұрын

Thanks!

@ryanlopez6563 5 ай бұрын

Thank for the video I'm looking to getting one

@DoRC 4 ай бұрын

Definitely check it out. For the price I don't think you'll be disappointed.

@rozzleshnozzle9793 4 ай бұрын

Awesome little mod. I checked my cheap one out the other day. It's lowest setting is super easy to stop, but the gearing sounds horrible. Lol. See how long it lasts I guess. Bought a cheap one to see if it's the kinda thing I will like or not. Been using peasant mode screwdrivers all my life on hobby stuff, so will see how this thing goes.

@DoRC 4 ай бұрын

I don't I think you'll be disappointed. I genuinely don't think I would be in this hobby if I couldn't use power tools.

@rozzleshnozzle9793 4 ай бұрын

@@DoRC yeah I imagine so too. I'm bed bound after knee surgery the other day, so about to dismantle, oil (diffs and shocks), grease and loctite my new truck, so I will know very quickly how I get on. Cheers for the vids mate.