Joint Venture Ep. 51: Right angle joint with spline tenon "Yatoi Hozo" (Japanese Joinery)

Рет қаралды 343,330

6 жыл бұрын

In this series I explore different wood joinery techniques. This is not a 'how to' video. Just sit back and join me on my venture to find beautiful joinery! More Projects on: www.dorianbracht.com German website: www.tischlereibracht.com Instagram: / dorianbracht
Donate: / dorianbracht
Wood: Hard Maple, Oak, Bubinga
……….
Buy my tools! Through the affiliate links at DICTUM. I personally also buy a lot of my tools here (Buying through the affiliate links gives me a small commission without changing the price for you):
Kataba 250, Crosscut // Kataba 250, quer:
bit.ly/31N8GPO *
Mini-Kugihiki Dowel Saw150 // Dübelsäge Mini-Kugihiki 150:
bit.ly/2wfeXZ3 *
DICTUM Chisel, Long Pattern, Blade Width 4 mm // DICTUM Stemmeisen, lange Bauform, Blattbreite 4 mm:
bit.ly/2SmdJne *
6 Piece Damascus Hybrid Chisels, Blue Steel // Damaszener Hybrid-Stemmeisen-Satz, 6-teilig:
bit.ly/31SMzr9 *
Leather Chisel Roll Bag, 20 Compartments // Lederrolltasche, 20 Fächer:
bit.ly/2SHOcDM *
Pfeil Carving Tool, Gouge/V-Parting Tool, Long Bent, Sweep 8L / 18 mm // Pfeil Bildhauereisen, Hohleisen/Geissfuss, langgekröpfte Form, Stich 8L / 18 mm:
bit.ly/2SAVd9A *
Pfeil Compact Carving Tool, Gouge, Straight, Sweep 9 / 5 mm // Pfeil Bildhauereisen Compact, Hohleisen, gerade, Stich 9 / 5 mm:
bit.ly/31MCfkF *
Veritas Router Plane, High Carbon Steel // Veritas Großer Grundhobel, Kohlenstoffstahl-Eisen:
bit.ly/2tQsUeU *
French Scraper Blade, Rectangular, Thickness 0.25mm // Französische Ziehklinge, rechteckig, Stärke 0,25 mm:
bit.ly/2OO7Ehe *
French Scraper Blade, Rectangular, Thickness 0.4mm // Französische Ziehklinge, rechteckig, Stärke 0,40 mm:
bit.ly/2uufUMx *
Hattori Burnisher, Diameter 10mm // Hattori Abziehstahl, Ø 10 mm:
bit.ly/2tRGIpv *
King Sharpening Stone, Grit 800 // King Schärfstein, Körnung 800:
bit.ly/38nrzeI *
King Sharpening Stone, Grit 1000 // King Schärfstein, Körnung 1000:
bit.ly/38n6kJR *
Jinzo Sharpening Stone, Grit 2000 // Jinzo Schärfstein, Körnung 2000:
bit.ly/2Hh9m6L *
King Honing Stone, Grit 6000 // King Abziehstein, Körnung 6000:
bit.ly/37mkAkE *
Sun Tiger Shaping Stone, Grit 220 // Sun Tiger Schruppstein, Körnung 220:
bit.ly/2SjvUtN *
Belgian Whetstone, Fragments, 48-58 cm² // Belgischer Brocken, Bruchstück, 48-58 cm²:
bit.ly/37pbhk6 *
DMT Dia-Flat Lapping Plate,120 Micron // DMT Dia-Flat Abrichtblock, 120 Micron:
bit.ly/2OJh2CP *
Precision Rule, Semi-Rigid Version, 1000mm // Präzisionslineal, halbstarre Ausführung, 1000 mm:
bit.ly/2voxmlI *
Shinwa Mini Carpenter’s Square // Shinwa Mini-Zimmermannswinkel:
bit.ly/38r3weH *
Shinwa Square „Sashigane“, Flexible // Shinwa Winkel »Sashigane«, 510 mm, flexibel:
bit.ly/3btyg0C *
Veritas Dovetail Marker, Dovetail Ratio 1:6 // Veritas Zinkenwinkel, Neigung 1:6:
bit.ly/2uJJw8v *
Starrett Combination Square, 4-Piece Set, Satinated Surface // Starrett Kombiwinkel, 4-teilig, satinierte Oberfläche:
bit.ly/2HiUKU7 *
Precision Knife Edge Square, 100mm // Präzisions-Haarwinkel, 100 mm:
bit.ly/3bC9gEH *
Precision Knife Edge Ruler, 300mm // Präzisions-Haarlineal, Länge 300 mm:
bit.ly/3bCUqNW *
French Spring Dividers, Shaft Length 200mm // Französischer Spitzzirkel, Schenkellänge 200 mm:
bit.ly/38p3CDT *
Japanese Marking Gauge, Dual Cutters, Screw Clamping // Japanisches Streichmaß, 2 Messer, Schraubklemmung:
bit.ly/2uM4eor *
Shinwa Ink Line // Shinwa Tintenschlagschnur:
bit.ly/38ntwb6 *
Pfeil Marking Knife // Pfeil Anreißmesser:
bit.ly/2Hk6i9Z *
DICTUM TC Router Bits, 12-Piece Set, in Carrying Case // DICTUM HW-Fräserset, 12-teilig, im Transportkoffer:
bit.ly/37ntWgm *
Bessey KliKlamp // Bessey KliKlamp:
bit.ly/31RC2wl *
Affiliatelinks/Werbelinks
Die mit Sternchen (*) gekennzeichneten Links sind sogenannte Affiliate-Links. Wenn du auf so einen Affiliate-Link klickst und über diesen Link einkaufst, bekomme ich von dem betreffenden Online-Shop oder Anbieter eine Provision. Für dich verändert sich der Preis nicht.
……….
Music:
Lakey Inspired - Saturdays ( / lakeyinspired )
Lakey Inspired - Shine Bright ( / lakeyinspired )
Lakey Inspired - I Found Me ( / lakeyinspired )
Lakey Inspired - Sweet Dreams ( / lakeyinspired )
Lakey Inspired - Midnight Bounce ( / lakeyinspired )
Support Lakey Inspired on Patreon: / lakeyinspired

Пікірлер: 204

@DorianBracht 6 жыл бұрын

Sorry for the delayed upload, had a rush job to take care of. Anyway, enjoy!

@petelaferte375 6 жыл бұрын

I have watched all of your videos, for some reason this astounded me. Super inspirational. Thanks.

@BischBaschBosch 6 жыл бұрын

For those who wait come the good things ;) Have to say, the Joint Venture is such a good idea for a series. Works as a resource as well as a therapeutic watch. Good job.

@eherlitz 6 жыл бұрын

We forgive you

@DorianBracht 6 жыл бұрын

Thank you!

@DorianBracht 6 жыл бұрын

Thank you!

@thomasarussellsr 6 жыл бұрын

Another beautifully executed joint. A bit of practice, and patience, and it will be perfect in no time. Great job, Dorian. (For anyone thinking I am "tearing him down", I have mad respect for what he is doing here. I just know the gaps are not what he is shooting for. Perfection is a journey, not a destination.)

@DorianBracht 6 жыл бұрын

Thanks :)

@raymondmendoza2428 4 жыл бұрын

Wow wow I just began to try to work wood. I’m 69 yrs old. I do not think I will reach that degree of awesomeness. What beautiful work b

@DorianBracht 4 жыл бұрын

Took me 12 years in all with apprenticeship. So chances are high you can!

@soberlivingwithbrianfrankl8254 5 жыл бұрын

These are some of the very best videos on KZfaq. Just all around great. I really love the chisel work!!! Just excellent

@somedumwhite 4 жыл бұрын

Working with hardwood makes us appreciate working with pine so much more. Nice job! Very cool

@moorem99 4 жыл бұрын

I've not seen skills like this in over 40 years. A lovely piece of work and video. Thanks very much.

@DorianBracht 3 жыл бұрын

Thank you!

@JW77 5 жыл бұрын

Wow, the bed that my grandpa made for me 40 years ago had joints just like this. He's a carpenter trained by Japanese.

@nonameneeded4605 3 жыл бұрын

Did he pass some knowledge on to you? Was he happy with his career choice? I know time were probably rough.

@JW77 3 жыл бұрын

@@nonameneeded4605 Sadly no. Life was rough for him so he forbade anyone in the family from similar career paths.

@kkfenrich 6 жыл бұрын

Beautiful joint. So much detail unseen in the finished product! Complex in design, simple in presentation. Well done!

@DorianBracht 6 жыл бұрын

Thank you!

@elpayapaya6156 5 жыл бұрын

Great video. I'm learning good things, as an amateur is something really good for me. Thanks.

@r1273m 6 жыл бұрын

Really good to see you back again; a most enjoyable video as usual. Thank you for posting. Bob

@DorianBracht 6 жыл бұрын

Thank you!

@mark261166 6 жыл бұрын

Well, I'm Impressed, I wish I had your talent. Thanks for posting.

@DorianBracht 5 жыл бұрын

Thank you!

@adrianperalta7192 6 жыл бұрын

Now i'm writing in enghish, look, read "amazing, it makes my ski crawl👌excellent, perfection and as it is like japanese carpenter, master👊! greetings from Argentina"

@DorianBracht 6 жыл бұрын

Thank you! Greetings from Berlin :)

@jimmiebrown8101 5 жыл бұрын

Had to watch twice because the firt time I had my eyes closed nodding my head to that stillmatic beat! Dilla donuts meets Roy Underhill.

@DorianBracht 5 жыл бұрын

Nicee 😎

@AverysMan1105 3 жыл бұрын

Insane amount of work

@MC-wh3xm 6 жыл бұрын

Great work as always but personally not a fan of the prolonged pitch black scene transitions. I kept thinking my phone screen turned off.

@DorianBracht 6 жыл бұрын

Thanks, I‘m just trying to transition with less abruptness... still experementing, since self taught.

@jcrm05 6 жыл бұрын

This has to be one of your more complex ones. Such a beautiful work.

@DorianBracht 6 жыл бұрын

Thank you!

@robertbrunston5406 3 жыл бұрын

Awesome joint! Thank you for sharing.

@RomerGuitar 4 жыл бұрын

Simply amazing, congrats!!!!

@DorianBracht 3 жыл бұрын

Thank you!

@martinwolf5957 6 жыл бұрын

Was es alles für Verbindungen gibt? Mal wieder der Hammer was du da zeigt. 👍 👍 👍 Wauuuuuuu L. G. Martin

@DorianBracht 6 жыл бұрын

Danke! Ein paar gibts noch. Heisst ja nicht umsonst 051 ;)

@andreicharpentierquesada4530 6 жыл бұрын

Always love to see ur videos

@DorianBracht 6 жыл бұрын

Glad to hear!

@greenjoseph4 6 жыл бұрын

Worth the wait for sure!

@DorianBracht 6 жыл бұрын

Thank you!

@eduardo_carvajal 6 жыл бұрын

Nice music, awesome work, glad I am here

@DorianBracht 6 жыл бұрын

Thanks!

@SPUDMACKER 6 жыл бұрын

Sweet!!! Absolutely class.

@DorianBracht 6 жыл бұрын

Thank you!

@tooljunkie555 6 жыл бұрын

Very cool as all these ventures are!!early congrats on 100k bro much deserved

@DorianBracht 6 жыл бұрын

Thank you man! Not quite there yet ;)

@tooljunkie555 6 жыл бұрын

Dorian Bracht always bro..a d u r pretty darn close bro! 100x better than anything I could do..

@robertbrunston5406 5 жыл бұрын

Very interesting! So I guess the advantages are no glue required and you could disassemble if you needed! Thank you.

@janb3938 4 жыл бұрын

playing at x2 speed makes the background music drum n bass

@calimero42vb 6 жыл бұрын

Just beautiful and awesome

@DorianBracht 6 жыл бұрын

Thank you!

@DnKennethJr 5 жыл бұрын

That's amazing joinery.

@DorianBracht 5 жыл бұрын

Thank you!

@jandeeg152 6 жыл бұрын

Great stuff, envious result!

@DorianBracht 6 жыл бұрын

Thanks!

@AdrianPreda 6 жыл бұрын

Lovely!

@DorianBracht 6 жыл бұрын

Thanks Adrian :)

@smokesmypaparazi 4 жыл бұрын

My man you have nice skills but my true appreciation lies in the person's ability to design these joins. How the hell does one think to join two bits of timber in this manner, incredible.

@DorianBracht 4 жыл бұрын

Thanks! Yes, I'm also always in awe...

@jper07vic 5 жыл бұрын

Wow incredible

@DorianBracht 5 жыл бұрын

Thank you!

@germanguidetti4591 4 жыл бұрын

Impresionante, Felicidades!

@Kikilang60 4 жыл бұрын

Hey Mr. Show off. Now I have to watch another of your videos.

@leritalangelo6847 6 жыл бұрын

TROP FORT !!!!!! beau travaille !

@DorianBracht 6 жыл бұрын

Merçi!!

@Xraller 6 жыл бұрын

Amazing!

@DorianBracht 6 жыл бұрын

Thank you!

@abureehan486 4 жыл бұрын

Very nice thanks.

@DorianBracht 4 жыл бұрын

Thank you!

@RohnB 6 жыл бұрын

Hope you have a book recommendation or two on where you're finding all these joinery techniques.

@DorianBracht 6 жыл бұрын

The Complete Japanese Joinery is a good start.

@chucspe 4 жыл бұрын

Me: *binge watches 51 joinery videos on youtube* Wife: Why did a company named Dictum bill our credit card $600?

@ChevalSerge 6 жыл бұрын

toujours aussi génial bravo

@DorianBracht 6 жыл бұрын

Merçi!

@solarcanum 6 жыл бұрын

AWESOME!

@DorianBracht 6 жыл бұрын

Thanks

@user-rl4qc4dy6n 6 жыл бұрын

So accurate. Nice. Greetings from .ru!

@DorianBracht 6 жыл бұрын

Спасибо!

@redkin1960 4 жыл бұрын

Perfectly. It is like a separate art form. And what kind of connection, in your opinion, is suitable for practical use?

@DorianBracht 4 жыл бұрын

Thank you! This joint is used in buildings, when you do not have the space to thread a full tenon.

@cormackeenan8175 4 жыл бұрын

I wish Ikea would make furniture using these joints.

@patrickolsen1525 5 жыл бұрын

How many pounds (or whatever system you use) would that joint hold at a 90° angle?

@franciscohernandez4766 2 жыл бұрын

Muy buen trabajo. Disculpa que madera es. Saludos cordiales

@osrictentaqclesmin 6 жыл бұрын

Might you consider a shot at the end of tools used for each video? For example you used what looked like a small bevel gauge to mark the dovetails inside the mortise. Of course there are a million ways to skin a cat but you learn a lot from watching the elegant efficacy of others. Are there certain tools you find are indispensable for layout in tight spaces?

@DorianBracht 6 жыл бұрын

The bevel gauge was actually rather big. Unfortunately I cant find miniature ones. Insespensibe in tight spaces is definitely a thin long marking knife!

@jawediqbal9475 6 жыл бұрын

Wood work ,my blood.

@adrianperalta7192 6 жыл бұрын

Impresionante!, me pone mi piel de gallina, 👌excelente, maestro. Saludo desde en Argentina

@andreicharpentierquesada4530 6 жыл бұрын

se habla ingles no español :v

@juliocesarcaseresmena6588 5 жыл бұрын

@@andreicharpentierquesada4530 la excelencia no tiene idioma!!!

@andreicharpentierquesada4530 5 жыл бұрын

@@juliocesarcaseresmena6588 no, pero si este chavalo habla ingles, no le vas a poner un mensaje en español, que tiene el que estar usando el traductor de google, no tiene que

@juliocesarcaseresmena6588 5 жыл бұрын

Charpantier yo entiendo...pero no crees que en la misma manera, a como los hispanoparlantes, hacemos el esfuerzo de entender el Inglés, no podría haber reciprocidad de parte de ellos!!?? No es por jugar de culazo, pero nada cuesta leer los comentarios de nosotros los suscriptores, que somos los que "mantenemos" vivos éstos canales... El arte de este mae, la dedicación y la técnica es envidiable...de mi parte tome su like buen hombre!!! 👍🏻

@andreicharpentierquesada4530 5 жыл бұрын

@@juliocesarcaseresmena6588 si el video fuera en español, le diria que lo diga en español. pero las cosas como son. el sujeto es carpintero no traductor

@solosniper86 5 жыл бұрын

Incredible! I'm new to your channel but I'm hooked! Do you have a suggestion for some good literature pertaining to the art of Japanese joinery and the setup phase? My wife got me the book by Kiyosi Seike but a lot of it's just pictures. It's still a good book but I'll need a more technical guide to this in order to get to the next step. Thanks!!!

@DorianBracht 5 жыл бұрын

Thanks! Sure you can have a look at ‚TheComplete Japanese Joinery‘ and ‚Joints in Classical Japanese Architecture‘

@totobill22 6 жыл бұрын

Excellent travail, comme toujours. Il faudrait un explicatif des applications que ces assemblages permettent.

@DorianBracht 6 жыл бұрын

Merçi. Il est un petit peu difficile en français, pardon.

@hartmutdumke9144 4 жыл бұрын

lieber herr bracht, sehr super zuzusehen wie sie sich zu immer komplexeren verbindungen holzvorantreiben und diese auch schaffen. wenn sie so weitermachen werden sie bald sogar ihren japanischen tischlerkollegInnen zeigen können, wo der (holz)hammer hängt 8-)))

@DorianBracht 4 жыл бұрын

Hahaha, danke :)

@lyndonalcock7796 6 жыл бұрын

Hey this is really nice, what woods do you generally use

@DorianBracht 6 жыл бұрын

Thanks! It’s Hard Maple.

@Temuba 5 жыл бұрын

Excellent work as always. I'm a subscriber and have watch all your videos at least once if not more. Quick question on this joinery. Are the two pins left long on purpose to disassemble later or can they be cut flush for a more permanent but aesthetic look? Again thanks

@DorianBracht 5 жыл бұрын

Thank you very much, I‘m glad you enjoy them! I think they are usually trimmed flush, but I need to disassemble these show joints every now and again for clients and such. So I leave them long.

@RikuIshmaru 6 жыл бұрын

Since a lot of wood glues are stronger than the wood itself, would it be possible to make larger dimension lumber for this kind of work by gluing 2x4's together? Would love to build a little tea house on a shoestring budget since anything like 4" thick is pretty much impossible to find in my area.

@DorianBracht 6 жыл бұрын

Hmm, wood glue doesn’t do to well when exposed to the elements. Maybe try to get lumber directly fom a sawmill or on ebay/craigslist.

@osrictentaqclesmin 6 жыл бұрын

Another great video thanks. I’ve been looking for a joint to fit my slab down onto leg tenons for my Roubo bench and this might work. If I do the traditional wedged through joint I’ll not get it out of the building when I move! Can the joint be disassembled? Do you think this would be a good option? Or would recommend another joint? The slab is huge and in all honestly probably doesn’t need fixing but joinery is fun right! Thanks again

@DorianBracht 6 жыл бұрын

Thank you! Yes, it would be feasable to use this joint for your workbench. If you leave the shachi sen pins long you can easily disassemble the joint. I would leave a gap, like the one in my sao tsugi (ep 35) video, so you can persuade the leg off the floating tenon with a wedge or nail iron.

@osrictentaqclesmin 6 жыл бұрын

Dorian Bracht Thank you. Do you dimension your blanks by hand? I love this process but as the timbers get bigger squaring end grain becomes challenging! My bench legs are 6”x5” Sapele. Not easy! I appreciate your videos very much; you are passionate and fastidious - a great combination. I’ve just finished making my first kebiki and it works wonderfully but I found I had to use the thumbnail blade I made for the gauge to finish cutting the mortise as it as tiny. My point to this is certain joints clearly require odd chisels! I’d love to see you talk about favoured ones and also your thoughts on layout.

@DorianBracht 6 жыл бұрын

Thank you. I dimension my stoch with machines. On bigger stock I square off with a hand saw.

@jonairgoncalves4886 4 жыл бұрын

Super parabéns o seu trabalho é simplesmente fantástico se tivesse condições financeiras aceitaria um mestre com o seu esti

@jonairgoncalves4886 3 жыл бұрын

Obrigado Dorian amei o seu comentário e lhe peço divulgar para interesse de outros futuros clientes

@johnmarkhatfield 6 жыл бұрын

i love your work. i used to watch an american tv show called the woodwrights shop. he makes everything traditionally, but usually the european/american way. it's a little boring once you sort of get it. i love how your videos make me feel like i'm just a beginner wondering what's going to happen next. i've made things like a violin or cabinets and am starting on a large timber frame and have done much in between. it's fun to see something i've dreamed up like a beveled sliding dovetail that has a dovetail on the end that keys and slides into a different housed joint - being made the proper way and to find out its actually something from a different tradition. perhaps i have some japanese in me. do you use a table saw? something difficult for me is getting stock so exactly similar (especially for a scarf joint). i think my planes aren't at the correct angle or something and i get tear out in hard woods. the planes are sharp, but maybe not hair shaving sharp. it takes a lot of skewing and changing direction to tame. sometimes i wish i had some machines to do fast precise things. for pine and poplar it's like butter though. and planing multiple together to get exact sizes is easy. some day i'll have the time to make my own planes. i don't have the time or money to woodwork anymore though. and i never sleep well hence the rambling comment made in the middle of the night.

@DorianBracht 5 жыл бұрын

Thanks for the comment! Yes Roy Underhill, I know the show. Ive seen it a number of times. Also I use machines to dimension my stock. It helps me save time.

@gunterschone8402 6 жыл бұрын

Super Video, Dorian. Die Verbindung ist super und wie die aussieht auch belastbar. Sprich wenn man so ein regal bauen würde, mit der Querverbindung. Dreht das regal dann, dann müssten die Verbindungen doch dafür halten? Mal eine Frage, kennst du dich mit dem >Shinwa Winkel »Sashigane«, 510 mm, flexibel < aus? besser gesagt, mit der japanischen Skalierung? Weil die unterschiedliche "Rechenarten" haben (Durchmesser zu Umfang oder zum Quadrat)

@DorianBracht 6 жыл бұрын

Danke Günter! Sollte halten wenn man genug Materialstärke hat. Den Sashigane gibts auch in mm. Die Mathematik und verhältnisse bleiben eigendlich gleich, egal welches System du benutzt, oder?

@gunterschone8402 6 жыл бұрын

Bitte schön. :-) Ich habe ja den Sashigane felxibel, eine Seite ist in mm und die andere Seite ist in japanischer Einheiten. Dachte nur du wüsstest wie die den benutzen für die Umrechnungen, werde dann mal schauen. Ob ich es mit dem Video hinbekomme, nur dann mit der mm Teilung. :-) Trotzdem danke für deine Bemühungen. :-)

@independentliberty9628 4 жыл бұрын

It would be interesting to see a strength test of that joint. I would imagine that it is pretty stout.

@DorianBracht 4 жыл бұрын

It should be... maybe I'll do failure testing in the future...

@twmd 6 жыл бұрын

lovely. what wood do you use?

@quaz18 6 жыл бұрын

twmd oak,maple,bubinga. Its in the description.

@PierceyeG 5 жыл бұрын

I've never seen a joint like that before. Anyone know what sort of application this little beauty would have? Seems like a furniture joint at first glance.

@DorianBracht 5 жыл бұрын

It’s actually used in carpentry, when a full length tenon isn‘t feasable.

@SirDominic 6 жыл бұрын

The level of complexity here is crazy surely no sane person would use this in real life but then I remember it's Japanese. With all these videos I try and think why would someone take the extra effort to make these? Does it provide extra strength or give the finished article a more pleasing aesthetic? Some times this is true and then you get ones like this one which seems to be trying too hard to do all of it at the same time and then I remember how Japanese culture views buildings. That they are non permanent and even moveable. I'm assuming then that one of the biggest reasons for many of these joints is they can (relatively) easily be undone and reused if required whilst maintaining all the other properties. Which would make perfect sense that you would add in the extra time and effort now to make things easier in the future. Either that or the Japanese are crazy just for fun which is also equally plausible :P Excellent work as always sir and I thank you for taking the time to show us.

@DorianBracht 6 жыл бұрын

Thank you! The main feature woth this joint is it is invisible on three sides and you can fit a beam in a tight space, since you don’t have a long tenon.

@johnmarkhatfield 6 жыл бұрын

hiding endgrain so it's not exposed to the elements is really important for wood. most european styled timber frames use pegged joinery and the peg would allow water to enter for bacteria to start eating the wood away. they still last a long time if the roof sheds it far enough away, but siding that covers each nail with the next piece of siding is how it's done the euro way. most modern carpenters in america for exterior use don't care and just get pressure treated pine. it still rots away super fast because of how little care we have for the long term. the only people that would do this sort of work have the time and the passion. the money aspect to pay a carpenter to make these joints doesn't work for 99% of people in the world. i'm sure mr bracht only makes things for himself, friends, or the very very wealthy.

@mikegriffiths3440 5 жыл бұрын

nice joint! I disagree with the short grain left at the back of the false tennon though, perhaps a longer one with more timber at the back to resist sheer at that point??

@DorianBracht 5 жыл бұрын

True, if it were bigger I probably would. But for demo purposes....

@DorianBracht 5 жыл бұрын

Thanks btw ;)

@exejesus27 3 жыл бұрын

what wood did you use?

@MichaelFord 6 жыл бұрын

I love watching your videos and learning about the Japanese joints. What is the name of the chisel that you use starting at 6:43? That thing is awesome. Where do you learn all the joints that you feature?

@totobill22 6 жыл бұрын

Chez nous, on appelle ça une "Guimbarde", je ne sais pas comment ça se dit en Anglais. www.bordet.fr/guimbarde-veritas,fr,4,741S9.cfm

@mnthailand 6 жыл бұрын

Michael Ford it is called a router plane.

@totobill22 6 жыл бұрын

En effet, je ne me souvenais plus...merci :)

@BischBaschBosch 6 жыл бұрын

If you want to learn some of these Japanese style joints I recommend The Complete Japanese Joinery by Yasuo Nakahara as possibly the best place to start (Second time I've recommended this book on this thread I know. Not spamming, it just is a great resource).

@DorianBracht 6 жыл бұрын

Thanks! I belive your questions have been answered :)

@joergsrom6221 4 жыл бұрын

Schick schick schick. Superior

@DorianBracht 4 жыл бұрын

Danke!

@davidlangton4743 6 жыл бұрын

Are you referring to a certain book when making these joints or is it just personal knowledge? I'd like to do something similar where I can learn all the joints to practice my accuracy.

@BischBaschBosch 6 жыл бұрын

I recommend The Complete Japanese Joinery by Yasuo Nakahara as a very good place to start.

@davidlangton4743 6 жыл бұрын

Bisch Basch Bosch thanks mate!

@DorianBracht 6 жыл бұрын

Yeah, what Bisch Bash Bosch said.

@palisage 3 жыл бұрын

Are the pins sawed flush at the end? Or are the left the way are?

@DorianBracht 3 жыл бұрын

Sawed flush.

@mikecalhoun8497 6 жыл бұрын

Your video is 13:10 long but how long did it actually take to make this beautiful joint.

@DorianBracht 6 жыл бұрын

A couple of hours. But the figuring out and filming takes the most time.

@tejwisegangi 5 жыл бұрын

I 'bout had a panic attack at 3:53 when he put the chisel over the line. Thought he was gonna mess it up.

@DorianBracht 5 жыл бұрын

Hehehe, sorry for the scare ;)

@TheAl_T 5 жыл бұрын

What do you do with all of these joints? Do you have like a collection of them?

@DorianBracht 5 жыл бұрын

I sure do!

@TheAl_T 5 жыл бұрын

Can we get a picture of it? Maybe in the KZfaq feed thingy

@felibzo7848 6 жыл бұрын

How long does it take to make those joints?

@DorianBracht 6 жыл бұрын

This one was a couple of hours. But it was the first time making it.

@suplerb 6 жыл бұрын

I want all of these tools but I'm not skilled enough to use the properly

@thomasarussellsr 6 жыл бұрын

Same here. The skill comes with the practice and patience in the lay-out phase. The more you do, the better you'll get.

@iloveamerica8541 5 жыл бұрын

Was für ein grundhobel ist das?

@dillanmistry 4 жыл бұрын

I subscribed

@DorianBracht 4 жыл бұрын

Thank you!

@dillanmistry 4 жыл бұрын

Dorian Bracht You deserve it

@thomas_2604 4 жыл бұрын

Music de gran tourismo 4 ?

@weiderlitrentoalves4039 4 жыл бұрын

boa tarde. muito interessante, mas lhe faço uma ressalva, faltaram as medidas. Quando postar, mostre todas as medidas.

@jonairgoncalves4886 3 жыл бұрын

@ikust007 4 жыл бұрын

Same as Mister Chikadee did for is covered “deck”...?

@DorianBracht 3 жыл бұрын

Love his channel!

@jonairgoncalves4886 3 жыл бұрын

Sim

@dongpelsscorpiousmusique Жыл бұрын

make a tutorial on Joinery

@mindfullsilence 3 жыл бұрын

6:25 my god this part made me nervous!

@agusprianto2816 5 жыл бұрын

Good...🖒🖒i like.iam subsribe.thanks

@DorianBracht 5 жыл бұрын

Thank you!

@robertosalinas8819 4 жыл бұрын

Yo le aria dos taladres le pongo 2 tornillos de 1/2...y listo

@angelgrim1 4 жыл бұрын

Y yo también. Como complicar un trabajo para algo tan sencillo.

@adrianperalta7192 6 жыл бұрын

Jaja, sorry!

@user-ip8gz2fc3z 3 жыл бұрын

ベタ裏もいいとこ。裏押しが大変。

@jonm420jm 5 жыл бұрын

Just subscribed. Epic joinery wood pornography, I needs the lotion stat!

@jonm420jm 5 жыл бұрын

Right as the joint came together I ran back to watch the inside angle chiseling action on the female side only to see that you added that footage at the very end it's like you knew someone might care to see that moment in action again. Very nice!

@DorianBracht 5 жыл бұрын

Hahaha, great! Glad you enjoyed it ;)

@hkkhgffh3613 5 жыл бұрын

Pondering how a japanese master would judge this? 😁

@DorianBracht 5 жыл бұрын

Same :)

@jonairgoncalves4886 3 жыл бұрын

Com certeza

@Uswesi1527 Жыл бұрын

What can I say ?!

@worldpeace6927 6 жыл бұрын

Imagine doing this on hardwood, not easy

@DorianBracht 6 жыл бұрын

It is hard wood. It’s actually called Hard Maple and is very challenging to work...

@worldpeace6927 6 жыл бұрын

Dorian Bracht Maybe i will give it a try in the future, but looks like it requires a lot of time to finish just one

@gregwarner3753 4 жыл бұрын

I think these joints are far too complex when a right angle joint can be made with a mortise and tenon and a couple of pegs. They simply take too long to make.

@DorianBracht 4 жыл бұрын

This one is for the time when you have too little space to fit an entire tenon length.