Click Hear To Support Doubleboost www.patreon.com/bePatron?u=57... l. l.php?u=https%... www.r-techwelding.co.uk/
Пікірлер: 22
@lensman5762 Жыл бұрын
Brings back memories of when I got my old battered ML7. Everything had to be adjusted. Thanks you.
@TERRYB0688 Жыл бұрын
Brilliant Jon, I’ve been machining for about 6 years just as a hobby and these tuition type videos help a great deal, cheers John
@Cairos1014 Жыл бұрын
Thank you! Really appreciate you and many others that make the time to teach your skills.
@rc166honda Жыл бұрын
Great advice and as ever many wise words. Thanks for posting.
@paulingham7815 Жыл бұрын
Brilliant John, I really enjoy watching this series. A lot of us can do these things but, not all of us can explain clearly how to do these operations, you do that very well. Thanks for these videos and please keep them coming.
@craigbrown2183 Жыл бұрын
Excellent demonstration John, thanks for taking the time to post this.
@paulmorrey733 Жыл бұрын
Thanks John
@stuartlockwood9645 Жыл бұрын
Cheers John, spot on demo, and explanation, nicely done bonny lad. Best wishes to you and Debs 😊, Stuart UK.
@BedsitBob Жыл бұрын
You need some left handed Micrometers John. 😊
@RalfyCustoms Жыл бұрын
Nicely done John man, thanks for sharing, thats exactly how I do it on my Harrison, only I usually move the tailstock the wrong way at least once 🤦♂️
@BensWorkshop Жыл бұрын
Cheers for the tips.
@chrislee7817 Жыл бұрын
Thanks John. Going to have to do this on my old Hardinge. They have a three point contact on the tailstock, two at the front and one in the centre at the back, so a bit different.
@neilgarrad49319 ай бұрын
Thanks
@davidforbes6250 Жыл бұрын
Imperial is good for me still!
@manufacturingandrepairingskill Жыл бұрын
Good work
@chrisarmstrong8198 Жыл бұрын
What are you up to, John ? The dial indicator "test" at 11:52 would have shown zero whether there was an offset tail stock or not (since both ends were cut at the same tool setting).
@kentuckytrapper780 Жыл бұрын
Excellent information John, great video, keep'um coming..
@carlwilson1772 Жыл бұрын
Very good Jon, excellent tutorial.
@tomt9543 Жыл бұрын
Magic!
@Stefan_Boerjesson Жыл бұрын
Checking up my toy Chinese made mini lathe.... No center mark, no 2 adjustment screws. One locking screw is found. Untightening that screw and pulling the tailstock I'll likely fall backwards with the tailstock as company..... Thanks for the lesson! I've seen this done before but when not practising, the question is eminent, "How did they do it"? Always god having repetition. From time 08.40.... Why not apply an indicator and adjust according to the indicator? Night sandwiches waiting. Cheers
@ianwhiteley9643 ай бұрын
Hi John, are the bars at 6.35 availablle for purchase anywhere please? many thanks