Dovetail machining using CNC
Рет қаралды 13,931
3 жыл бұрынI used a CNC to machine a traditional Dovetail.
It is possible to machine a wider variety of digital joints unique to CNC, but today I decided to try a traditional Dovetail.
Traditional dovetails had to use a dedicated dovetail bit.
I was able to achieve satisfactory results as a result of testing.
@julianfreto1666 2 жыл бұрын
Nice to watch. The music and the zzzzzz sound of the machine makes a nice harmony
@thingnet-todoro 2 жыл бұрын
Thank you!
@aborntexan 4 ай бұрын
Thanks for making this video! I'm about to begin building my own CNC router. I will now plan on allowing some room up front to give me this capability. I hadn't thought about it while working up my design.
@thingnet-todoro 4 ай бұрын
Yes ^^ There are many parts that cannot be processed with a flat CNC. If you secure the space you mentioned and think about appropriate fixing methods, various processing becomes possible. In addition, if you make a general-purpose angle jig, even though it is 3-axis, it can be quite useful. My hands are shit, so it's hard to get good results without the help of equipment. ( I used a translator. ^.^)
@richardfarwell6759 5 ай бұрын
Those dovetails turned out really good. I tried that a couple of years ago in Baltic ply and got boatloads of chip out. Haven't tried again. FYI, the parts cut with the dovetail bit are called "tails" and the mating joints are "pins". The joint's name comes from the shape of a Dove's tail in flight.
@Minarinamul 3 жыл бұрын
CNC로 장부가공 잘 봤습니다!!
@_lindwood 2 жыл бұрын
How much did you offset for the fit tolerance?
@stuartguarnieri3977 3 жыл бұрын
What software did you use?
@thingnet-todoro 3 жыл бұрын
Hello? Modeling and CAM are using Fusion 360. The CNC Mecha is Openbuilds style. CNC Controller is self-made GRBL controller. CNC operation is using Candle. Da Vinci Resolve is used for video editing.
Life Latitudes
Рет қаралды 71 М.
Sothpaw Designs | Become A Better Woodworker
Рет қаралды 29 М.
i-shoppers обзоры
Рет қаралды 1,7 МЛН