Dozer Working on a Steep Slope

Рет қаралды 687,548

letsdig18

14 жыл бұрын

Grading the banks of the pond out. little komatsu just grabs the slopes good!

Пікірлер: 128

@DieselandIron 4 жыл бұрын

I've always been impressed with how well those Komatsu's push. I ran one for awhile on an airport project and really enjoyed that machine.

@Thehoelogdog 11 жыл бұрын

nice work. good little machine also. When I am doing side hills, I know I am real close to a 2 to 1 slope because the back will slipp a bit. They stick well to it. A 2 to 1 is about 26.3 percent. It has the pucker factor elevated and yes it gets exciting when they slide down the hill doesn't it. But nice slopes.

@letsdig18 14 жыл бұрын

@sgtsahara that was a pretty steep slope, I'm not sure what degree they will flip at but I know this one will side sideways down the hill before it will flip. I've slid down a 50' hill sideways before, that was a ride!

@garydumoulin6318 5 жыл бұрын

I love watching these videos so that i can learn techniques but I don't think I have the balls to work my little 420c on a grade like that.Good video.

@TheBaskerwille 12 жыл бұрын

Very nice job ! Fine operating. I wish I had more hands, so I could give that operating 4 thumbs up !

@MichaelBouzakine 14 жыл бұрын

Awesome video, and sweet operating!

@JasonWaterfalls13 14 жыл бұрын

Excellent vid and dozing Chris!! Great outside camera view for this vid. It didnt look like that steep of a grade until you got close on that first pass and then damn! That was steep! That Komatsu holds the ground very well. I tried to look up the spec for maximum sideways grade for this machine, but couldnt find it. Haha, ya know me. Again, great work!

@chrdub89 14 жыл бұрын

We cut slopes alot at my job. I love doing them just not sliding around in the seat lol nice video

@uncledave692002 13 жыл бұрын

im a finish dozer operater and i have been on 125 ft tall slopes on a narrow track d5 and it stayied pretty good. I love slope work its just so exciting to me and i have ran a komatsu 39 and it was a sweet finish tractor but if i had to choose i would want a 650 jd Lgp

@lj2729 11 жыл бұрын

your operating is fine no flaws at all good job

@letsdig18 13 жыл бұрын

@powerballlin whats wrong with my operating?

@jjsoom4665 12 жыл бұрын

Chris I'm building a small pond with a d4d how deep should i go

@jimbutowski5163 12 жыл бұрын

when someone makes it look that easy you know he has skill.I took a three month course operating heavy equipment, for me the tracter and grader were tough as hell....I still passed though.

@fishproet 12 жыл бұрын

is this for the pond?

@waltersondermann5271 7 күн бұрын

Top Driver, Spezialist !!

@robert1330. 4 жыл бұрын

Doing a great job

@therichesthobo1 12 жыл бұрын

Good job keeping your dozer on and angle, keeps it from flipping much better

@hvy1ton 14 жыл бұрын

@letsdig18 Just as long the downhill track doesn't catch a rock or stump. The D39 was taking a big bite on the first pass, nice.

@RJM159 14 жыл бұрын

Did you change your pants after that?

@kidthing1119 14 жыл бұрын

bawls, you got em

@Flyboy207 3 жыл бұрын

Yesterday was my first real day running the D8H at work, I was way up a hill in the quarry cutting a notch looking for rock. My boss told me that cat will cut a 2:1 just fine, but my pants were already brown from the little slope I had worked! Wouldn’t have scared me so much on the ground like this, but if I rolled it was a 500 foot tumble to the quarry floor.

@tewiginton1s 14 жыл бұрын

Wish the ponds I've dug were that easy. Usually takes us a week to get the dam and spillway in plus c and g and grading the banks out

@ahsaniqbala4931 4 жыл бұрын

Nice work and good apretor

@thegreenerthemeaner 13 жыл бұрын

It ain't the slide it's the stop....had a deere 350 on one track after doing a 270 down a hill. trees cut off @ the ground with wet leaves on top. Still trying to figure out how to sell it for an amusement ride. Good operating as always.

@cristianbarrarios2257 8 жыл бұрын

buena estabilidad el komatsu. yo trabaje un cat d6 muy buenas maquinas saludos desde chile

@jaymiesanders2035 11 күн бұрын

That's not at all bad thats pretty much bullshit slope. That's pretty funny!!

@digger321b 12 жыл бұрын

thats always fun when that happens

@tadrikwiens 11 жыл бұрын

nicely done, 2-1?

@MrJohnjake 13 жыл бұрын

lol you were sliding like crazy

@EcotecUSA 11 жыл бұрын

These Komatsus are great tractors, but the parts problem is terrible! I am currently waiting for a fan-mount and pulley assembly that is estimated to take 140 days to get from Japan, and will cost over $1,100.00 I had six-way swivel block go out on a D31-A that was a wait of 120 days and a cost $5,000.00 plus shipping. I love the tractors, but I will never buy another one.

@cristianbarrarios2257 8 жыл бұрын

muy buen trabajo

@bozoone4464 6 жыл бұрын

Bunch of haters. Enjoyed the video.

@kervan.s 6 жыл бұрын

Badboy!!!

@pelagic6 13 жыл бұрын

With these things, it slips before it tips.

@gtrpkr65 13 жыл бұрын

@ws6talovr hell, I've done finish on a 1 7 1/2 to 1 on a hightrak D 8 L series....that was a blast...Dryfork landfill project

@mbulu6351 5 жыл бұрын

Inside the cab video are the ones i 👍

@TheLargecars 12 жыл бұрын

funny as i always look up equipment i seem to always land on one of ur videos.....good thing im a subscriber or at this point i would have to XD

@castoremiliourdanetabracho3376 5 жыл бұрын

Excelente

@dirtartist1 13 жыл бұрын

well, personal opinion. It's not only how badass the operator is it has alot to do with the type of working on

@scrapercaterillar 12 жыл бұрын

How much time do you have? You started too low when trying to blend the slope. You could have and should have started a bit higher.

@davidwillard7334 3 жыл бұрын

STEEP !! SLOPE !! ??? TRY !! CLIFF !! EDGE !! NEXT !! TIME !!

@muhalwi22. 3 жыл бұрын

spirit of success ❤️ pokoknya semangat dan sukses ❤️

@WV5513 14 жыл бұрын

nice

@sasop117 13 жыл бұрын

@powerballlin i thought he made a nice job of it

@codyp414 10 жыл бұрын

buddy two words: slope board

@KMAFarms 12 жыл бұрын

Not a damn thang when it comes to construction but when it comes to forklifts its a little different story.lol

@kansaskid6969 13 жыл бұрын

@sgtsahara most dosers wont flip over they will slide first.

@cristianvanessaelaracarnei9889 6 жыл бұрын

esse sim é operador.

@tonyaasher4910 3 жыл бұрын

Under mining your toe of slope is what will cause u to flip.

@leelove2017 5 жыл бұрын

Not bad for a green horn

@ktm2smokers337 4 жыл бұрын

Hey hologdog a 2 to 1 slope is 50 percent. 4 to 1 is 25 percent

@farmer864 14 жыл бұрын

got some grip

@user-fy6md6th5z 4 жыл бұрын

Офигеть, наш уже бы разбулся на таком уклоне.

@jeremynelson9621 5 жыл бұрын

That's not that steep. Just did a slope that was 37 percent. Good job though looks clean for that type of material.

@antonioruizrocha1286 5 жыл бұрын

If was steep dozer will not be able to ride on slopes . It will on a 3 to 1 slope

@phildees9058 4 жыл бұрын

Steep you flatlanders are funny!

@gregwitkamp5583 3 жыл бұрын

nice just a little hard on the under carriage

@rickgoddard6925 2 жыл бұрын

Little bit of track ski

@nch-wf3tu 7 жыл бұрын

Not steep? Looks steep to me. Good job

@gidrozin 14 жыл бұрын

5 stars for the risk!But i would just use a excavator to grade of the slopes.

@shitloveaduck 4 жыл бұрын

Razor Wire - I hear ya but in 3.5 minutes?? Nope. Haha

@user-du3om7rg2o 9 жыл бұрын

เจอบ่อกุ้งหน่อยมั้ย

@user-qi5vf2ws8t Жыл бұрын

Damages all tractor undercarriage. Another method or a motorgrader would be better options

@dillhan98 12 жыл бұрын

fill pond 5 feet deep it will fill up over time

@kolsche 12 жыл бұрын

Nothing, good operator....smooth slope, no wash boards from cutting too much. Moves fast and efficiently ..............what more do you want. Good hand. Doesn't matter how big or how small, it is scaleable...........I have seen too many 10 operators that do not know how to effciently use their machines..........they have a 10, and they want an 11.......

@joshfriend7103 5 жыл бұрын

I see the dozer and the slope, but am still looking for the steep slope.

@wilmamcdermott3065 4 жыл бұрын

Do that with cat and scraper

@charleisi6935 9 жыл бұрын

get a road grader

@SchwabenpowerV8 13 жыл бұрын

Yes, ride that Bitch !! 5/5

@AndrewHagler418 12 жыл бұрын

nothing some people are just a pain in the ass

@taylorluttmer2111 9 жыл бұрын

Lol not steep at all

@dennisgood2887 4 жыл бұрын

When yr ass starts to slip yr ar a 2 to 1 slop

@wedontthinksotim 12 жыл бұрын

ya call that steep? try doing 3.2 miles at a 2,5 to 1 80 feet down from top to toe . gets a little harry lol watching you i think ya could do it

@waynepickhardt4975 5 жыл бұрын

Bet you could fry an egg on the transmission.

@ronniemctaggart8722 5 жыл бұрын

If it had a transmission the smaller komatsu dozers up to the d61pxi are all hydrostatic lol

@ronniemctaggart8722 5 жыл бұрын

@@waynepickhardt4975 well and f that weed the Case you would've know that I'm no spring chicken myself Ive been on equipment for 32 yrs and operated alot of shit way older than me and set in the seat of a komatsu like that one for 3 fucking yrs even took then plastic off the seat so enjoy the video old timer

@waynepickhardt4975 5 жыл бұрын

@@ronniemctaggart8722 lol I have 38 years in the seat. Not much older than you. I thought you were younger by your know it all statement. Bet you never had to run an old beat up open cab 977K like I did back in the day.

@ronniemctaggart8722 5 жыл бұрын

@@waynepickhardt4975 yes sir set on one for 3d excavators in Atlanta GA it had a stacking rake on it

@ronniemctaggart8722 5 жыл бұрын

@@waynepickhardt4975 never knew what an ac was for yrs even in excavators we had squirrel fans to blow the hot air on us scrapers that the coushion hitch didn't work when you got off work you felt like you had worked today equip is much more advanced and operator friendly

@unclestinkyfinger 13 жыл бұрын

Yeah, the slope looks nice, but it's not steep. That's no better than a 3:1. Little toy dozer like that could handle a 2:1 or better in good dirt. Good job for what you got though.

@NfPracing 13 жыл бұрын

No the dozer tipping over at 95degree i got a 6f steep and 10f -4f-1f slope give to a machine 80degree

@bonya666 10 жыл бұрын

It's not that steep it's only a 3:1 and it's a dozer wide from the top to the toe. I've put a skid steer on a 3:1 with 50' from top to toe wasn't even scary!

@MrSealteam7bm 9 жыл бұрын

Yea big guy.

@MrLewisMovies 12 жыл бұрын

@letsdig18 whoever wrote that was referencing dave chapelle's joke on Rick James. "I wish I had more hands so I could give you four thumbs down."

@tmx864 14 жыл бұрын

wwwweeeeeeeeee

@abercrombiebliss 9 жыл бұрын

my lawnmower can do that.

@openureyes929 9 жыл бұрын

Ya? But ur gay. Can ur lawn mower do that?

@bsbsjsbbbzzs5569 5 жыл бұрын

@@openureyes929 د

@ladellablevins6125 10 жыл бұрын

you call that steep lol !!!

@rogergerrin1223 4 жыл бұрын

@wilmamcdermott3065 4 жыл бұрын

Thats nothing

@stevecorcoran2960 6 жыл бұрын

Steep? Looks like about a 1:1 to me.

@TheHank58 12 жыл бұрын

its not steep unless youre sittin on the arm rest while your bladin it

@ws6talovr 13 жыл бұрын

haha u thing that was steep...lmao..im am a finish dozer operator and that was maybe a 3:1,MAYBE... get in a d8r and finish 2:1, then u can see what steep is like.

@alphonsotate7154 11 жыл бұрын

Buy American.

@thetree3402 8 жыл бұрын

Not a finish grader by far is he..........I would say he is running that dozer, not operating it

@letsdig18 8 жыл бұрын

+daniel “doesmasherdale” hartsell so you can tell all this from a 3 minute video of knocking a edge down some?

@thetree3402 8 жыл бұрын

yeah, because i have operated equipment for over 20 years, an operator has an ability to do what he was doing without those......whooptie doos, if you operate then you know what that term means.

@letsdig18 8 жыл бұрын

+daniel “doesmasherdale” hartsell a operator should also be able know that a lgp dozer does not cut hard clay very good at first either

@saveamerica8460 7 жыл бұрын

Yeah this dude is not an operator..... Cant even cut a bank right with a six way blade! lol If that dozer had a loose track he would have thrown it.

@Brian-mc4pd 6 жыл бұрын

@ the tree. And 20 yrs operating makes you know everything? Man guys like you are a big joke. The kind that love to run their mouth until somebody else shuts them up, easily . Heres hoping we run into each other tough guy. Letsdig18 - all your vids are good for everybody, experienced or not. These guys that pick apart your work are assholes who are just mad they can’t do what you do. Keep it up brother