No video

DPF or FAP, constant regenerations! Lack of power and lots of smoke! Diagnosis and solutions

  Рет қаралды 2,029

Alfa Romeo? No Problem!

Alfa Romeo? No Problem!

10 ай бұрын

Hello guys! DPF or FAP constantly regenerating? Car with no power? Should you remove the filter? In this video I research the faults and consequences that led to the DPF problem. Step by step we see that everything this car suffered was due to a complete lack of basic maintenance! Do not forget that the filter always suffers from the good behavior of the air intake and the turbo pressure. Both affected by the destroyed air filter.
The turbo also has a compressor completely damaged by debris ingestion and the air mass meter with similar problems.
Pay close attention to the videos below that are extremely relevant to understanding the causes and consequences. And as a simple maintenance avoids and saves a lot of things!
If you liked this or any other of my videos, please SHARE with your friends, hit the LIKE button and consider SUBSCRIBE!
--------------------------------------------------------------------------------
PayPal link to help my channel:
www.paypal.me/...
Support the channel via MBWay: (+351)913225320
Patreon link to help my channel:
/ alfaromeonoproblem
--------------------------------------------------------------------------------
1.9 8v and 2.4 10v jtd and mjet engines Timing belt, complete job:
• JTD and Mjet 1.9 8V or...
How DPF and FAP works:
• DPF and FAP, do you re...
How to test DPF and FAP in 5 minutes:
• Test your DPF or FAP i...
How to understand and modify EGR systems:
• Various solutions for ...
How to avoid damaged air filters on Alfa Romeo 159, Brera and Spider 939:
• engine failure prevent...
The importance of all car filters:
• How to properly take c...
How to test the flyhheel protecting device:
• Having constant issues...
How to test VGT system and more:
• Turbo fault codes? How...
How to remove, repare and assemble the exhaust manifold on mjet engines:
• ENGINE NOISE, Exhaust ...
How to test mass air flow meter and lack of power:
• Failing Mass Air Flow ...
Why do 1.3 mjet engines consume oil and how to prevent:
• Problems related to oi...
All Videos for Alfa Romeo 164 and 166 V6 Turbo Busso 2.0L:
• Behind the scenes, Alf...
Timing belts\chains How to:
• Alfa Romeo 155 1.9td t...
Alfa Romeo owners in need of help! I try to:
• Car sold with warranty...
Alfa Romeo Experts in Potugal (so far):
• New series! Alfa Romeo...
Ac Sytems, faults, solutions ans tips:
• Stop charging the A/C ...
Cooling systems, failure and maintenance:
• Is the temperature gau...
Ligth bulbs and ilumination:
• Light fault system on,...
Everyting suspension:
• Broken alfa 75 suspens...
Clutch engagement, DMFs, master and slave cylinders:
• How to remove and re-u...
Brakes, solutions and problems:
• Big brakes!? Do you re...
Power problems and solutions:
• Mjet Injectors, how to...
DPF and FAP problems and solutions:
• DPF and FAP, do you re...
Project Alfa 75\Milano:
• Alfa Romeo 75, project...
Alfa 33 1,7 16v complete restoration:
• Alfa Romeo 33 1.7 16v ...
Tutorial videos:
• How does a starter mot...
Quick tips:
• Quick tips! Car don't ...
Electrical issues:
• How to test your fans?...
Mjet\jtd engines, hard start or no start:
• It's worse! But why? ...
Vlog videos:
• My Alfa Romeo 155 pres...
Autel Diagnosis Machine:
• How to SOLVE airbag li...
Contact me:
alfaromeonoproblem@gmail.com
Where i do my research of parts: www.eper.fiatforum.com
Where i buy OEM parts in PORTUGAL:
JRParts www.jrparts.pt/
Rua Dionísio Rodrigues 70, 2415-801 Leiria PORTUGAL
(+351)244820770 lojaonline@jrparts.pt
Where i buy all ORIGINAL parts in PORTUGAL:
LizItalia www.lizitalia-... (+351)244 871 520
Rua Dr, R. Virgílio Vieira da Cunha, 2401-903 Leiria PORTUGAL
Parts e-mail: vitorjoao.lizitalia@lizauto.pt
Alfista salutations!
#AlfaRomeo #alfa159 #AlfaRomeoNoProblem

Пікірлер: 30
@dannydkasel8296
@dannydkasel8296 9 ай бұрын
Owner can be happy handing this maltreated 159 to you ... saving before having more damages
@alfaromeonoproblem
@alfaromeonoproblem 9 ай бұрын
Thank you very much, at least the car is drivable now!
@5Dale65
@5Dale65 2 ай бұрын
Hey Bruno! I have an advise for you as for removing broken studs without a welder. What I do sometimes is try to spin a nut on the remaining threads, and then hammer down the end of the stud, so it squishes and doesn't let the nut to spin off anymore. Then it's just a matter of turning the nut by force, it will try to spin all the stud off. Cheers ☺
@alfaromeonoproblem
@alfaromeonoproblem 2 ай бұрын
Hello. That is an excellent trick! I will try that soon. I have a DPF with a busted stud
@One_over_the_eight
@One_over_the_eight 4 ай бұрын
Another common problem with the, especially old nitrile rubber pipe from the DPF to the pressure sensor is cracks and/or splits. If it's leaking it won't register any pressure and testing it with an air gun won't reveal any splits or cracks either as the air goes straight through.👍🏻
@alfaromeonoproblem
@alfaromeonoproblem 4 ай бұрын
Hello. Check out the part numbers you need on eper.fiatforum.com
@One_over_the_eight
@One_over_the_eight 4 ай бұрын
@@alfaromeonoproblem Thank you.
@russell-gt1dy
@russell-gt1dy 2 ай бұрын
Take a puff of a cigarette and blow the smoke thro the tube and look for any smoke leaks
@vladisneste6482
@vladisneste6482 9 ай бұрын
Subframe without any rust.😳
@alfaromeonoproblem
@alfaromeonoproblem 9 ай бұрын
Hello. Here in Portugal we do not have rusty parts on any Alfas. None really.
@DashCamSerbia
@DashCamSerbia 10 ай бұрын
Thank you for all the great info.
@alfaromeonoproblem
@alfaromeonoproblem 10 ай бұрын
Thanks for watching always
@DashCamSerbia
@DashCamSerbia 10 ай бұрын
EGR video would be great too, of course.
@alfaromeonoproblem
@alfaromeonoproblem 10 ай бұрын
It is down on the description
@alfreire
@alfreire 9 ай бұрын
Gracias por compartir conocimiento, unos vídeos muy instructivos... te he enviado al correo el enlace de descarga de la ISO eLearn del Alfa 159, por si no lo tienes y puede ayudarte con el tema eléctrico... Saludos... ;-)
@alfaromeonoproblem
@alfaromeonoproblem 9 ай бұрын
Olá. Muito obrigado por ver o vídeo e por me ajudar! Se for mais fácil para si, tenho o meu canal totalmente em português. É só pesquisar o meu nome
@alfreire
@alfreire 9 ай бұрын
Graciñas, atopeino e xa me suscribín... ;-)@@alfaromeonoproblem
@paulwootton5378
@paulwootton5378 9 ай бұрын
You know a lot of information about Alfas...it is unbelievable who neglected some cars are by their owners?,,,what would they do without your knowledge
@alfaromeonoproblem
@alfaromeonoproblem 9 ай бұрын
Thanks for watching the video. I do try my best
@aVesela3_14cka
@aVesela3_14cka 2 ай бұрын
Greetings from Croatia ,Why are you soo far away -.- xD very very very good job man , i cant find mehanic who is 10 % like you one q , i can close egr (plate with 3 holes ) on my GT 2006 1.9 150 PS ? he has DPF? ? just not close it with a full plate ,if i have understand you correctly
@alfaromeonoproblem
@alfaromeonoproblem 2 ай бұрын
Hello. Thanks for watching. I do have a video for that question about egr. kzfaq.info/get/bejne/ed9zfMd31567iKc.htmlsi=UNlXxzalojyIl07a
@mark737-c4x
@mark737-c4x 7 ай бұрын
Very sorry to bother you again but my throttle valve isn't closing 1.9 16 valve diesel with the charging pipe off I should see the valve close on switch off is this correct? Thanks
@alfaromeonoproblem
@alfaromeonoproblem 7 ай бұрын
Hello. Yes, that is correct. kzfaq.infoOEfP_yu82Uo?si=xiMszpQR1mXwroFp kzfaq.info/get/bejne/radkgdh70LPVqWQ.htmlsi=l8vZ4eUg_0Sxvjt3 See if it helps
@mark737-c4x
@mark737-c4x 7 ай бұрын
Thank you I really like your videos and the passion you have for Alfa's I wish you success and a happy new year
@SinisterMKD
@SinisterMKD Ай бұрын
Hello, what size of screw is on 18:50 ? Mine is also missing..
@alfaromeonoproblem
@alfaromeonoproblem Ай бұрын
Hello. 13mm head, 8mm body, short
@SinisterMKD
@SinisterMKD Ай бұрын
@@alfaromeonoproblem Thanks Bruno. Deff the best Alfa channel!
@alfaromeonoproblem
@alfaromeonoproblem Ай бұрын
@SinisterMKD thanks for the support
@BK-it6te
@BK-it6te 9 ай бұрын
Hello I have a Alfa 159 JTDM 2.4 210 stock I have put a larger turbo with a intercooler the turbo is a Carrett GTX2871R - 827690-0003 T. Housing A/R 0.64 It’s a ceramic water cooled turbo The turbo is to big and doesn’t spool up What turbo would you recommend please?
@alfaromeonoproblem
@alfaromeonoproblem 9 ай бұрын
Hello. I do not comment on modifications. For my and my cars I always do everything stock. Sorry
Cause and Solution for Constant or Failed DPF Regeneration. Alfa Romeo Spider 939
25:18
路飞太过分了,自己游泳。#海贼王#路飞
00:28
路飞与唐舞桐
Рет қаралды 43 МЛН
SCHOOLBOY. Последняя часть🤓
00:15
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 10 МЛН
How To Gut & Remove A DPF The Easy Way!
10:01
George Austers
Рет қаралды 228 М.
Driveshaft Boot Change Alfa 159 2.2 JTS Part 2
18:10
elgdisco
Рет қаралды 1,9 М.
Alfa Romeo 3.0 V6 Busso Cambelt change tutorial gta 2.5 3.0 3.2
48:57
Remplacer Sonde FAP / DPF - P2085 - Alfa Romeo 159 - Meca Maniaque
11:04