HOW TO REGLAZE A BATHTUB STEP by STEP | Full Bathtub Reglazing In Depth Process

HOW TO REGLAZE A BATHTUB STEP by STEP | Full Bathtub Reglazing In Depth Process | DP TUBS REGLAZING

Рет қаралды 24,069

Күн бұрын

Thanks for stopping in again for another DP TUBS Bathtub Reglazing video. I appreciate those who like to refurbish items in their home coming here to see this cost effective alternative to upgrade your bathroom. This channel is for do it yourself (DIY) viewers as well as Professional viewers.
FOLLOW ME ON INSTAGRAM: / dp_tubs
Products Used in Videos on this Channel:
Bathworks Acid Etch: amzn.to/3qJ4cXR
Material Used:
DCK Orbital Palm Sander: amzn.to/3crROIg
Titan Capspray Compresson and Spray Gun: amzn.to/3rmhEm0
Bondo Fiberglass Resin: amzn.to/3rneluX
Bondo Fiberglass Mat: amzn.to/3nNUjXZ
Bondo Glass Short Strand: amzn.to/3xlYuh0
Ryobi Corded Drill: amzn.to/3xkf3K6
HDX Mixing Cup 32oz: amzn.to/3p0JD7L
2" Paint Brush 24pk: amzn.to/3nLdZMd
120 To 3000 Assorted Grit Sandpaper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing, Dry or Wet Sanding, 9 x 3.6 Inch, 36-Sheet: amzn.to/312NYzi
Bondo Spreader Pack: amzn.to/3HNIEAJ
Bondo All-Purpose Putty: amzn.to/3CPE29p
Zinsser 1-2-3 Primer: amzn.to/3oXAmO2
Krylon Alternative: Rustoleum Tub and Tile White: amzn.to/3FFTcQi
Caulking DAP Stretch: amzn.to/30YsZhe
Napco Extra Strong Acid Etch: www.napcoltd.com/case-extra-s...
Jasco Paint and Epoxy Remover: amzn.to/3xniGik
Loctite Foam Gap Filler: amzn.to/3xkgTuu
Capspray Titan Compressor 75 / 95:
Titan 0524041 or 524041 Capspray Maxum II HVLP Spray Gun with Free Check Valve Kit 0297051: amzn.to/3CUJo38
3M Half Mask Reusable: amzn.to/3DSmomO
3M N95 Respirator Filter 10pk: amzn.to/3cNv9CI
3M Cartridge Replacement Pack: amzn.to/2ZpjhUq
Fume Exhauster 8" Duct Tubing: amzn.to/3cKe64v
Portable Ventilation Exhaust Fan here: amzn.to/3k5Gz5W
Tack Cloth: amzn.to/2Zks2yT
Rustoleum Appliance Spray White: amzn.to/3r8Iw8T
Due to factors beyond my control, I cannot guarantee against improper use of the information I share in my videos. DP Tubs assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not DP Tubs.

Пікірлер: 61

@mikemyers1591 Жыл бұрын

Thank you for sharing. Keep them coming. Gold Coast, Australia

@rachellehmann9962 Жыл бұрын

Well done Danny

@JohnWilliams-xe2en Жыл бұрын

Awesome video. I am attempting to repair my bathtub. Would love to hear how you would approach my repair

@user-lf7en6rf8m Жыл бұрын

Hi that looks awesome, the paint and primer is something you have to mix or thin down, does Home Depot have these items, im a novice, however ive been doing more tub resurfacing, however its all brush on texture, thank you

@PizzaProphet 5 ай бұрын

Beautiful job

@BAT-man... Жыл бұрын

Thank your for a great how to. Could you please note the times for each step after the prep is done? Like 1st coat, wait xyz minutes, then 2nd coat, then wait xyz min, then 3rd coat, wait xyz minutes, then take off masking tape, then wait how long to use the tub? One last thing - the products listed for priming/painting are links to spray cans, but you used a spraygun, so could you possibly link to the paints you used in the spray gun, for primer and epoxy coat?

@thecollector77 Жыл бұрын

Refreshing

@juanjuventino570 Жыл бұрын

Buen video👍

@DPTubs Жыл бұрын

Thanks JUAN!

@TOMA-ny7gg 3 ай бұрын

Great video I see the list of the products but i dont see u use all that Can u explane what product u use in the video Thanks

@hulkhuggett 27 күн бұрын

What kind of compressor are you usitfor that spray gun, and do you have a filter on it? Thanks for the video. Looks bad ass!

@raymondedge8889 Жыл бұрын

You guys should be aware that this does NOT work for fiberglass tubs. They flex minutely and a hard glaze spiderwebs with use. However, for porcelain tubs, this is fantastic. Good video!

@DPTubs Жыл бұрын

Thanks for sharing your opinion. I have been in the industry for over 20 years and Fiberglass reglazing DOES work.

@yuppppppl Жыл бұрын

I think he just wanted somebody to believe him so he could tell his wife he was right 🤣

@aaronhitchcock9164 Жыл бұрын

@@DPTubs hey brother quick question....I'm speckling counter tops, how do I keep from getting the clear coat all over my hands, latex doesn't work cause it sticks and rips, kitchen gloves don't allow me much dexterity what can I do?

@DPTubs Жыл бұрын

@@aaronhitchcock9164 are you spraying? Blue latex gloves always work for me. I would just change gloves between coats

@ianandrews8773 Жыл бұрын

If you ever see this epoxy Harden in a cup you will notice that it's quite flexible almost like a rubber ball. This fellow doesn't know what he's talking about

@alejandrocastillon4240 Жыл бұрын

I have a 2 inch crack but it seems it’s a surface crack only my tub is flexing how deep do I drill to add spray foam to support the flexing part ITS URGENT I NEED HELP

@mmorris9751 Жыл бұрын

Thanks for your videos! What kind of Epoxy primer do you use? I have been looking for one, but have not been able to find the correct one for bathtubs.

@DPTubs Жыл бұрын

I use Midwest Chemicals Epoxy Primer or Resurface Solutions Epoxy Primer

@renecruz950 Жыл бұрын

Can you share which products you recommend for bondo, primer and finish.. looking to refinish ugly, old yellow enameled iron tub in Arizona

@DPTubs Жыл бұрын

Should be in the description box of the video

@deezelthirteen1434 Жыл бұрын

Do you caulk before or afterwards?

@katservices Жыл бұрын

With the years you have in I have to ask what is the better method. Pour on or spray on? Pour on seems to be a thicker and holds up better. Just wondering

@DPTubs Жыл бұрын

I have never poured on. I do not have an interest as pouring on just seems so messy and much more difficult to get a uniform finish.

@oldkid6 Жыл бұрын

Awesome job, how much would this typically cost to have a pro redo a tub like this? And how long would it take, a day?

@DPTubs Жыл бұрын

$395-$425 takes about 4 hours and can’t use for 48 hours to allow for curing

@CoryBrian Жыл бұрын

After it's all finished, how long should you wait before using the bathtub? Great tutorial!

@DPTubs Жыл бұрын

48 hours

@delacruzivan 5 ай бұрын

that s a profesional work congratulations!!!, how much for a work like that ?

@DPTubs 5 ай бұрын

$350-$500

@davidconrad8045 Жыл бұрын

Should I apply an Adhesion Promoter such as "Bulldog" before applying the primer?

@DPTubs Жыл бұрын

I would recommend it if your primer is not for adhesion. Some primers are for sealing only.

@st.patrick2207 Жыл бұрын

What kind of compressor do you use for the gun?

@DPTubs Жыл бұрын

Capspray Titan HVLP 75-115 I have the information in the description box.

@MachinesandTechnology-hr3rw Жыл бұрын

How much time you wait in between primer and top coat?

@DPTubs Жыл бұрын

10-12 minutes

@eriklemus396 Жыл бұрын

How much do you charge per tub

@DPTubs Жыл бұрын

$400-$500

@gurindermann89 Жыл бұрын

is there a cheaper sprayer option?

@DPTubs Жыл бұрын

You can try the Wagner Flexio 3000

@Bogart01-yp9xy Жыл бұрын

Hi, is this applicable to steel bathtub?

@DPTubs Жыл бұрын

Yes this is a pressed steel tub

@Jose-jx2xj Ай бұрын

I wish you don't move so much that camera but thanks!

@ZLoc23 Жыл бұрын

Do u work in SoCal ?

@DPTubs Жыл бұрын

@lurenacornella6588 Жыл бұрын

Hold the camera still I'm getting dizzy. JOB WELL DONE

@ereed442 Жыл бұрын

It’s on his head. He can’t hold a camera when he is working alone.

@DPTubs Жыл бұрын

Thank you for understanding that I am using a GoPro on my head lol

@lurenacornella6588 Жыл бұрын

I'm trying to a DIY on tub. Thank for the video.

@Bruehoyt Жыл бұрын

what primer and glaze are you using? Are you mixing with hardener and reducer? what size nozzle are you using? what pressure?

@DPTubs Жыл бұрын

#3 nozzle tip / euro epoxy primer / hardener yes, reducer as needed

@Bruehoyt Жыл бұрын

@@DPTubs thanks!

@nosut7996 Жыл бұрын

this method works ? ① apply stix primer without sanding ② then topcoat with epoxy paint What do you think?

@DPTubs Жыл бұрын

I’m always open to try different things…haven’t tried it

@cameronhay8759 Жыл бұрын

Possibly informative, but the fukn broken record, squeaky, (currently trendy) music killed it entirely. As it did when I looked at other videos on this channel. Might be a good reference, BUT lose the horrible music. No music might probably be better, tho a maybe a song by Queen could rock it

@DPTubs Жыл бұрын

“Possibly informative” “Might probably be better” “Tho maybe” Sounds like you enjoyed my video as much as I understood your comment

@michaelfinnegan1825 Жыл бұрын

The video is a demonstration and not narrated. If you don't like the music, turn off your speaker. I'm betting your purchase offered a ID-10-T discount, too?

@Jose-jx2xj Ай бұрын

The music is so annoying