DQ200 7 Speed DSG Clutch replacement - DIY

DQ200 7 Speed DSG Clutch replacement - DIY - How to.. VW Audi

Рет қаралды 27,425

Жыл бұрын

DQ200 7 Speed DSG Clutch replacement - DIY - How to.. VW Audi
In this video i go through and show you a How To on how to fit a DSG dry clutch. The tools and kit you need are readily available.

Пікірлер: 67

@sureshbabukandanchira 18 күн бұрын

A big like from Kerala India

@graylees-rm1vx Жыл бұрын

Impressed no body would ever of thought u wasn't a mechanic down to the level of perfectionism u show good to c nice one mate.

@Roverturbo Жыл бұрын

Nice, thanks.

@mikespink1965 6 ай бұрын

100% NOT a twat. Fantastic help to allow me to understand how to do this. THANKS SO MUCH!

@Roverturbo 6 ай бұрын

What it’s all about. 👍

@simon2knine 11 ай бұрын

Perfect job. Did my Audi A3 a few months ago. Used the same tool kits as you. Same clutch pack too. Don't know if you watched the LUK video on fitting the Gen 1 clutch kit..It's very good and covers everything.

@peterfox6256 Жыл бұрын

Very interesting ,not seen inside one of those before

@joelparedes 8 ай бұрын

Great great video !!!! 🙌🏻🙌🏻🙌🏻

@Roverturbo 8 ай бұрын

Thanks

@user-yg5gq1yt4k 4 ай бұрын

Good. And nice

@TaylorStylez 5 ай бұрын

Dude fair play! I think I’m going to give this ago myself…

@NovemberV8 6 ай бұрын

Good video. 18:00 measured 6mm, below 8,00mm means good. Pressing down the bearing you should use torque wrench and don't reach 12Nm. This laser tool is very user friendly, what is the high of each cylinder?

@Mubmoh 10 ай бұрын

Great video, in 2 minds to change a DQ200 clutch for a vehicle I am preparing to sell. Car drives fine and shifts gears good as well. Only issue I notice is that theres a 'screech' sound when accelerating from stationary while driving up a hill.

@ricardomedinasanchez7244 4 ай бұрын

Hi mate, can share with us the symptoms to replace the clutch? What exactly was doing before getting to the point of replace the clutch...thank you

@Roverturbo 4 ай бұрын

Stuck in gear and wouldn’t do a basic setting.

@ricardomedinasanchez7244 3 ай бұрын

@@Roverturbo, thank you!

@dustyfruitypie1633 Жыл бұрын

Fantastic vid, I might be bringing my gearbox to you to change my clutch for me soon. Where did you find all the information on how to do this job as I guess the haynes manuals won't have all these details

@Roverturbo Жыл бұрын

All the info is out there, I just did my homework. 👍

@imarunn 8 ай бұрын

Good job and in the video you explained great. I would like to know do I need to be changed my clutch pack for VW Polo GT TSI 1.2(DQ200 7 speed) clocked 100k kms. My car is running perfectly until I drive for more than a hour or in hill station, a little screeching sound on 1st and 3rd gear shift for 2 seconds, then it runs normal. I have scanned my car and all looks fine on screen.

@Roverturbo 8 ай бұрын

Thanks for the comments, unfortunately it’s hard to tell from here. Does it look like it’s slipping or flaring when it makes the noise? Ie the revs go up or spike up and down.

@jayanthajayarathna6835 8 ай бұрын

Thanks for the video, really helpfull. Can you please list all tools you used in this video? Thanks

@Roverturbo 8 ай бұрын

I will try.

@viorelgavrila2730 3 ай бұрын

Great job! Thank you for the video! I have a question. I have replaced the gearbox with an used one but the car had gen 2 and the replacement one is gen1 do you think they are compatible? Thanks

@Roverturbo 3 ай бұрын

I don’t know for sure, it’s only the clutch forks are different. So I can’t imagine they would be massively different.

@guillermomendez1422 11 ай бұрын

hi, awesome work, could you describe the measurements of the tool you use to measure de height? thanks

@Roverturbo 11 ай бұрын

The tool does all that?

@pranayshashank 8 ай бұрын

Quick question! I have a Skoda superb 2010 dq200 gearbox when I press the throttle gently it up shifts without any issue but when I stomp/aggressive push the car it hiccups/jerks a little to upshift what do you think the issue could be?

@Roverturbo 8 ай бұрын

Could be anything, even poss a misfire. I’d take it to a local specialist.

@robc5955 Жыл бұрын

Looks like you did a good job, not that I’d know, but assume as you’ve posted it worked. Noted you didn’t change mechatronics oil, I did recently utter pita of a job via breather and considered it an utter waste of time as at 100k it was exactly the same colour and smell as the new stuff. Anyway just wondered why you didn’t ie did you consider waste of time.

@Roverturbo Жыл бұрын

Yes, car is perfect. This is part of a bigger video series on a car I haven’t edited or released yet. 👍

@excossack Жыл бұрын

Interesting video. Is there a pre video to this one?

@Roverturbo Жыл бұрын

It’s part of a project not edited yet. 👍

@liammclaughlin6204 Ай бұрын

Did you do a video on the basic settings side? Have one failing on 100 after gearbox replacement

@Roverturbo Ай бұрын

I done it as part of another video I haven’t edited yet. There’s a web page somewhere that shows what the error codes are.

@brianrivers8980 3 ай бұрын

Very informative - did you hit any snags removing gearbox? Did you do it all from your yard?

@Roverturbo 3 ай бұрын

I removed the complete front end as I had to remove the engine. Yes all at home.

@Paul-zu2he 11 ай бұрын

Nice video! Which clutch kit did you buy?

@Roverturbo 11 ай бұрын

Luk ..the cheapest I could find basically.

@Mubmoh 10 ай бұрын

Hey mate, cheeky question. Would you rent out your Laser DSG clutch removal kit? Could help us both out from a financial viewpoint!

@Roverturbo 10 ай бұрын

Unfortunately not, I sold to someone else who needed it and I can borrow it back.

@yasmoh3641 2 ай бұрын

Hi excellent video could I possibly pay you for your help and get my flywheel and clutch changed on a vw golf mk6 2012 🤔

@Roverturbo 2 ай бұрын

Not sure what you mean by help? These gearboxes are very heavy and pain to get out.

@abdurrahimmohdnor9005 4 ай бұрын

if just change new flywheel, but clutch also old. Must fitting clutch or not.?

@Roverturbo 4 ай бұрын

No you should be fine, the clutch unit just locks into flywheel with teeth.

@sianmorris2327 Ай бұрын

Hello my boyfriends it’s having clutch slip on his dq200 dsg just wondering where u are from and could u help

@Roverturbo Ай бұрын

I could do the clutch set up. Not really interested in removing the gearbox, they are very heavy, awkward and a pain. South England.

@pavdark1145 2 ай бұрын

Can you please tell me where did you buy these 2 Tool Kits?

@Roverturbo 2 ай бұрын

EBay

@frankyboy6245 11 ай бұрын

what a geeeza, to big for me, nice vid

@tiaantheunissen6692 2 ай бұрын

Can you please share a link to buy the toolkit from? I'm looking to change my clutches cause the companies I've taken my car to, does not know what they are doing 😮

@Roverturbo 2 ай бұрын

This kit to remove and install clutch. www.amazon.co.uk/Transmission-Compatible-Gearbox-Installer-Remover/dp/B09YTV64KC/ref=mp_s_a_1_fkmr0_1?crid=3QN5AKSPGVTZS&dib=eyJ2IjoiMSJ9.IOmQhGfOUrNInT47IXBv2Hexw3qWdOabvGBod-vbOp8.dYDXAWxcFKAqZwPIJXb9giLgk1Fb93X3VQsENQ4K4V4&dib_tag=se&keywords=laser+dsg+kit&qid=1716137751&sprefix=laser+dsg+kit%2Caps%2C108&sr=8-1-fkmr0 This kit to set the clutch’s, you will need to check if you can buy cheaper else where. www.ebay.co.uk/itm/363526253461?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=9RtuYQ4-SxO&sssrc=4429486&ssuid=q7_G1vSkR_W&var=&widget_ver=artemis&media=COPY

@tiaantheunissen6692 2 ай бұрын

@@Roverturbo Thank you :) really appreciate it

@RahulKumar-ys7to 8 ай бұрын

How many kms after DSG DQ200 starts to fail in general? I am planning to buy a new VW Virtus GT. I am confused between manual transmission 6 gears or DSG DQ200 7gears. What Should I choose any recommendation. I am from India.

@Roverturbo 8 ай бұрын

I’m not sure, depends on how it gets driven. Mine had done 100k miles looked fine with plenty of meat left on it but was faulty and had to replace. Maybe because car had been sat for years. I believe the wet clutch 6 speed is more reliable.

@RahulKumar-ys7to 8 ай бұрын

@@Roverturbo one more question are Naturally Aspirated engines better than turbo engines ?

@Roverturbo 8 ай бұрын

Depends on the engine.

@chineduogbechie4875 7 ай бұрын

Hi. My golf 5 1. Loss in communication with tcm 2. Car would not start

@chineduogbechie4875 7 ай бұрын

Why

@Roverturbo 6 ай бұрын

No idea, sorry. Impossible to diagnose from here. work it out or take it to a mechanic. 👍

@ricardomedinasanchez7244 3 ай бұрын

Mate, that problem is your TCM, replace the complete mecatronic and do the basic setting, then should be go...

@Roverturbo 3 ай бұрын

Don’t you think he should check the wiring first? Powers, ground and communication?

@shanepatterson1368 9 ай бұрын

Why did you have to change the clutch

@Roverturbo 9 ай бұрын

Car had been standing for a long time, wouldn’t engage gears correctly, I think they was a fault with the clutch pack or rusted up.

@turktrchollanda7962 16 күн бұрын

What about the dmf.?

@Roverturbo 16 күн бұрын

What about it?

@turktrchollanda7962 12 күн бұрын

Does it always need to change together?

@Roverturbo 12 күн бұрын

@turktrchollanda7962 no, if the flywheel is fine, it can stay. It’s supposed to be a dual mass but I’ve never found any evidence that it actually is.