Thanks guys. Visual comparison to IOM - Less rocker, because of lighter weight which does not mandate that extra rocker to gain a reasonable level of floatation for the IOM's extra 2kg weight. Also narrower for the same reason of lighter weight. Keel and mast further aft and this translates to more buoyancy in front the rig's of C of E so potentially less inclined to nose dive but it also depends on the height of C of E which appears to favour the DF95 which seems to have a lower sail plan. Lower weight means good sail are to displacement ratio and low wetted area means good sail area to wetted surface ratio. Has anyone measured the wetted surface area of the hull? Sail area approx 3736 cm for the DF95 compared to an IOM which is approx 6,000. It equals to SA to Displacement for ratio of DF95 of 1861 per kilo and an IOM is approx 1500 per kilo. Acceleration of the DF95 should be much better than the IOM with the big rigs on each. Length overall is 5% less on the DF95 so top speed of the immersed hull prior to planing would not favour the DF 95. I cannot ascertain WS to Displ ratio in absence of WS of the DF95. I would guess WS would be less for the DF by at least 5% or more. IOM's are about 1400 on average. Neither can I ascertain the polar moment of either without tests. .

Keep watching your unboxing and can’t wait to get the 95 in August hopefully gives me goosebumps waiting to build this amazing yacht

I just ordered the 2012 version. I have many speed boats like the miss geico 36 and the sonicwake and this boat the 2021 version is looking awesome. so this will be my first sail boat and your vid is a bit old so I know the new version is built much better and its around $459 now. but I like the best so Im getting one. thanks very much for sharing my friend.

15:50 That's what she said.

Just purchased a Dragon Flite 95 after watching your excellent videos on building the Dragon Force 65 and unboxing the Dragon Flite 95..... Would you recommend using Gorilla Glue on all the fixing points on the Dragon Flite - as shown in your 1st Dragon Force assembly Video? Thanks John H (UK )

Many thanks for the reply , its answered that. Next stop the shop.

Hi wil. Thanks for posting the movie. Is there a follow up movie for an initial sail setup coming? I have bought my first df95 and I'm looking for a base sail setup

Thanks - John H

Does the centre controls hatch have a watertight cover or do you have to use sticky patches every time you go on the water?

How much ($) and where is it made? Enjoyed the vid.

Wow, 21K views, Nice!

Df 130 Soon coming ?

The BEARINGS in the main boom assembly on DF65 and I assume also this model DF95 are very poor quality as they RUST after only a very short time and should be made of Stainless steel. Yes there is a Stainless Bearing available, and I have replaced mine. Joysway Manufacturer should immediately make this upgrade, as it is the weakest link in this product.

GET YOUR DFLT95 at radiosailing.net :)