No video
Dragonhawk extreme x2 part 2
Рет қаралды 17,479
Күн бұрынPart 2 explains what happened in part 1
@TommyLourdes-singer-songwriter 6 жыл бұрын
That machine looks so cool and the adjustable throw is just a damn good idea.. But the price itself worries me.. It's been a few months could you please give me an update? I'm looking and would really like to know how this world of for you.. It would mean alot.
@TheBeardedTattooer 6 жыл бұрын
Well it hasn't died on me yet. BUT I haven't used it much either I use my bronc machines. The only problem I have with this machine is the cheap motor. So I'm going to swap it out for a Swiss made one.
@TheBeardedTattooer 6 жыл бұрын
If you want a reliable machine check out my newest video about the bronc s.
@inksizion9815 5 жыл бұрын
Hey Adam! I saw you just won a stigma prodigy machine, just sold mine because i only work with cheyenne for now, maybe show some of your work if you want? I only buy chinese power supply's because power is power but its the fake critical atom and its like the original one for me so its the same. I see you have big wasp rca cable, the needles rock also you should give it a try its great!. Stay off chinese machines if you want make good work, its money for the quality but it changes alot. Keep up the videos, cheers mate!
@TheBeardedTattooer 5 жыл бұрын
Îńķ Šìżìøň thanks for letting me know man that’s awesome I didn’t know I won. I commented on the video but idk how else to message him. Hope he gets it lol. I don’t like the machine that’s in this video it’s a piece the motor is junk. Dragonhawk is a bunk company in my opinion.
@thiccassboi4345 4 жыл бұрын
the fact that it has a contact with fine surface between the bearing and spring makes it a soft hitter. i read so much reviews about it. but yeah i think it just depends on artist. just my opinions
@jerkov420 5 жыл бұрын
Hey dude, I saw you comment on another guy's video on this machine and you said it really sucked after you tried it. Can you elaborate? Thanks
@joe-jz1dg 3 жыл бұрын
Thats the dan kubin knockoff
@AndysNuWorld 5 жыл бұрын
Would this be a good backup machine, I'm about to get a hummingbird v2 and I'd like to have a good backup machine that is affordable but not to cheaply made
@stoner8440 3 жыл бұрын
There about £22 quid On AliExpress
@mentalnebulosity896 6 жыл бұрын
How's the longevity turning out for your extreme X2? It's been a while since this upload has the status or generally anything about the machine far it's consistency change so far? This particular machine is shaping up to be my 1st. That spring situation sucks, have to use your spare 1st day!? what a drag!
@TheBeardedTattooer 6 жыл бұрын
the machine is great! surprisingly! as for the longevity, it's still running great. definitely worth the money.
@treybrown8664 6 жыл бұрын
+Adam The Tattooing Dad I just purchased one from eBay, and then found your review! can you tell me a little more about the machine? And if you used it yet? Also is the adjustable stroke really infinite from 0-5mm. And I have no idea if this is a dumb question or not but is the adjustable stroke the same as adjustable give?
@TheBeardedTattooer 6 жыл бұрын
Trey Brown theyre are no dumb questions when learning tattoo machines. I actually really like this machine. To answer your question the stroke length and the give are 2 seperate things. There is a little bit of give with this machine because of the springs. But you cant adjust it on tuis machine. However you can adjust the stroke.
@treybrown8664 6 жыл бұрын
+Adam The Tattooing Dad thank you so much! Last few questions, does it hit like a coil machine and how does the adjustable stroke come into play? And since you have used it what’s your setup for lining? Standard grip with 5-9rl? Or do you use cartridge grip with big groupings like 9-11rl? Or does it even work with cartridges
@tiesflies 6 жыл бұрын
Trey Brown lol dam bro, u doing an autobiography on him?
@FrankieKato149 4 жыл бұрын
Are these springs easy to find and buy new ones ?
@johnlayug8941 5 жыл бұрын
make a video on how to use it with cartridge.
@2shadywitit546 5 жыл бұрын
Was up bro I have question does this machine hit like coil machine??
@TheBeardedTattooer 5 жыл бұрын
It lines well but there isn't a give adjustment so I still prefer a coil over this one. And the motor isnt great. It's a cool concept but it could be way better and def isn't worth what I paid.
@2shadywitit546 5 жыл бұрын
@@TheBeardedTattooer dangg so by not being worth what u payed for u mean it's not worth the investment??..I also followed u on ig lol @youngloc35 that's my ig
@TheBeardedTattooer 5 жыл бұрын
@@2shadywitit546 lol yeah it's not worth it. If you follow me on IG u know what machines I swear by right? lol. The bronc machines are def worth it and they're only $100 more than this machine. But 10xs better quality.
@2shadywitit546 5 жыл бұрын
@@TheBeardedTattooer I was thinking bout getting lol I usually use my 2 bishops v6 and some coils from Chris gove but wanted to give that x2 a try lol
@TheBeardedTattooer 5 жыл бұрын
@@2shadywitit546 the v6s are way better than this x2. You might as well stick with your routine til a better lining rotary machine come out. If I get anything I like I'll let you know.
@stshadowops4801 6 жыл бұрын
any other vdeo of u tattoing using this machine??
@warsok2151 6 жыл бұрын
Ragnar Lud this guy suck on tattooing look at his left hand lol
@stshadowops4801 6 жыл бұрын
really??
@RussBgaming 6 жыл бұрын
Dan Kubin knock off smh
@TheBeardedTattooer 6 жыл бұрын
Russell B this machine wishes it could be a dan kubin machine lol. But youre right they tried to copy his sidewinder machine. This is nowhere near as good as dan kubins machines. But his machines in my opinion are a little too pricey.
@RussBgaming 6 жыл бұрын
I own two, I have a sidewider v5 and a swingliner hands down the best investment ive made
@AndysNuWorld 6 жыл бұрын
Looks like the jackhammer from worlwidesupply too. But looks like it made the same way by different name
Lithuanian Irons
Рет қаралды 89 М.