Dreame X40 vs Dreame X30 Ultra

Dreame X40 vs Dreame X30 Ultra - Which Is Better?

Рет қаралды 8,243

Ай бұрын

We compared the NEW Dreame X40 Ultra against the Dreame X30 Ultra
✅ Get 12% off the X40 with code vacuumX40
Amazon: X40 Ultra geni.us/gSrfR2
Amazon: X30 Ultra geni.us/OSqfKo
Amazon TriCut Brush for X30/X40/L20/L10 geni.us/VBGai7
Until June 14 you can get 12% off the Dreame X40 on Amazon with code vacuumX40
The X30 Ultra and X40 Ultra are two of the top performing robot vacuums we have tested to date. The X40 has three main differences that make it a bit more spendy. We test these in the video. Is the X40 worth the upgrade? It depends on your needs, but either will do well is most households including those with pets and carpets.
The TriCut brushroll works well (to our suprise) and is available separately.
**As an Amazon Influencer, we earn from qualifying purchases.
**Dreame sent me these vacuums for review, but my opinions are 100% my own and I insisted on no conditions.

Пікірлер: 46

@vacuumnerds Ай бұрын

Get 12% off on Amazon with code vacuumX40 geni.us/gSrfR2

@G0SuBunnY 29 күн бұрын

Dude your content is great! I was watching think you had like 500k subs. you def deserve more !

@vacuumnerds 29 күн бұрын

We're a new chanel, but we're trying hard! Please feel free to share this video.

@tyr0n313 29 күн бұрын

I call BS on the impartiality on this review. Every other reviewer has called out the side brush that stops when vacuuming carpets. This video shows the x30 side brush spinning but when you show the x40 on carpet, it’s sped up so you can’t tell. If I go into KZfaq’s setting and slow down the video to .25% I can confirm the side brush does not spin in your sped up video. That definitely should have been mentioned.

@vacuumnerds 29 күн бұрын

The side brush does not spin on carpet, but I can't confirm if it had impact on my carpet pickup performance test. Probably not in the middle of the carpet, but yes, definitely at the baseboards. I will let the brand know. I actually didn't notice it wasn't spinning, so my bad on that.

@HaggardPillockHD 6 күн бұрын

@@vacuumnerds considering that you chose to speed up that part of the video, this does not help with credibility.

27 күн бұрын

Thanks for the video! What is important for me is also 1) How high door thresholds it can pass without being stuck, and 2) How quiet it can vacuum on night mode (or “when I work at home-mode”).

@vacuumnerds 25 күн бұрын

1) I don’t know, but the wheels are fairly big so I’d guess about 1/2”. 2) I didn’t test noise level, but it’s not too loud in the quietest mode. If you’re in the next room you probably won’t notice it too much.

@revmatchtv Ай бұрын

Best video on this channel yet! (I’m biased).

@vacuumnerds Ай бұрын

Thank you 😂

@kavithasb8779 Ай бұрын

this channel is so underrated

@vacuumnerds Ай бұрын

Appreciate it! Please share the videos

@julianfp1952 Ай бұрын

A useful video. Thanks. The footage of your X40 carpet pickup test was very speeded up so I couldn’t tell but other X40 reviews have shown and commented on the fact that the side brush doesn’t spin at all on carpet (I think Dreame said because they were worried about it getting tangled in high pile carpets). I think one review also said that there was an option to fix that. Did you have the side brush working for the carpet pickup and if yes then did you have to set an option to make that happen or has Dreame made some change in the firmware? My home is mostly carpeted, including into the corners of my rooms, so I really do want the side brush to be doing its stuff on my fairly low pile carpets.

@vacuumnerds Ай бұрын

The side brush was not spinning on carpets in my test. I can check the settings when I have time. I can't confirm if it makes a difference or not, but in my pickup test it picked up just about everything I put on the carpet. Will it miss some pet hair near the edges of a room? Possibly yes, but again, I didn't test for every possible scenario.

@tyr0n313 29 күн бұрын

I came to the comments to say this too. This seems like a huge miss in the review.

@vacuumnerds 29 күн бұрын

Sorry I didn't point it out. I'll do another video to address it. I've contacted the manufacturer.

@dimitrios7766 Ай бұрын

Will you review any Dreame stick vacuums, like the R20?

@vacuumnerds Ай бұрын

That's a great idea. I'll add those to the list.

@mstiic Ай бұрын

Can you compare the Dreame X40 Ultra with that of the Roborock S8 MaxV Ultra?🙏🏻

@vacuumnerds Ай бұрын

Cool idea!

@mstiic Ай бұрын

@@vacuumnerds Thanks! I'm really hesitating between buying these two.

@nnikor Ай бұрын

I up this too!

@vacuumnerds Ай бұрын

@@mstiic It will be about a month before I can do this video. These comparisons take days to write shoot and edit.

@taiemgamerxrbg2080 Ай бұрын

The dreame x40 ultra is finally a robot vaccum that has enough suction to not need you to vaccum after it

@vacuumnerds Ай бұрын

Suction is important, but overall design, brushroll and the path it takes have a bigger impact on pickup. Think of it as an integrated system. Different manufacturers have slightly different approaches.

@BlazingNina Ай бұрын

Returning my defective x30 for this

@vacuumnerds Ай бұрын

there you go.

@ivana6141 Ай бұрын

The front bumper does not rebound all the way and getting collision sensor error. Do you know what could be causing this? I have x40.

@vacuumnerds Ай бұрын

I would contact them or swap it out

@ivana6141 Ай бұрын

@vacuumnerds I ordered on aliexpress the Chinese model. Dreame australia didn't help. I found a disassembly video for tge x30. Bending the front springs fixed it. I think the cut out around the camera was too tight.

@Devian83 28 күн бұрын

What is the size of the base station? Am I stupid because I seem like not able to find the dimensions.

@vacuumnerds 27 күн бұрын

I will measure it and reply here

@Devian83 25 күн бұрын

@@vacuumnerds thx!

@vacuumnerds 7 күн бұрын

@@Devian83it’s 14” wide x 18” deep (with the ramp) x 23” high

@mapleshilc 26 күн бұрын

sad, not available in canada yet, only x30 here

@vacuumnerds 25 күн бұрын

The X30 is pretty solid. I would imagine the X40 will be available in Canada soon as they just launched it in the US.

@adiands850 11 күн бұрын

Does the robot need to connect to the cloud or will it work fine without the internet?

@vacuumnerds 11 күн бұрын

It will work without internet. Ideally you’ll want internet to set it up. To control it with the app, you’ll want WiFi. I didn’t test this much, but I think you’ll be somewhat limited in the control you have without internet.

@adiands850 10 күн бұрын

@@vacuumnerds thanks very much. I'm concerned about the privacy mainly. With the camera being on and the feed being seen without my knowledge or control.

@vacuumnerds 7 күн бұрын

@@adiands850You can turn off the AI obstacle avoidance setting and you can disable the real time camera. However, I haven’t spent much time testing it. If you don’t want any video, I’d suggest the X30 or maybe the Matic which does all processing on board. They’re an American company.

@vishkumar Ай бұрын

i just got this ultra x40. How do i set the mopping pad washing frequency to every 5mins or so? The least it allows me is 10 mins. I do not want the mop pads mop for 10 mins without washing. My previous ecovacs t20 omni would let me choose 6mins.

@vacuumnerds Ай бұрын

They update the app frequently, so perhaps they will change it? You can mail or contact them via the app to request a more frequent washing. I'll let them know.

@StayConnectedEV 25 күн бұрын

$1900!!! seriously!!!!

@vacuumnerds 25 күн бұрын

I think this is the most expensive robot on the market. However, you can find discounts on every robot during sales days and near the end of a model run.