Lol :)

I'm one of those people who changes pads, like, 5-6 times before swapping out the rotors (when ideally you should replace them every 2-3 sets of pads). With my driving new rotors warp pretty quickly anyway, might as well continue using them.

@@SwapBlogRU I am the same. I have even warped.my rotors back straight again eventually!

@Kris Nicholson I do not know how it is there, bit in Ontario Canada, it is cheaper to replace rather than machine.

@Kris Nicholson I'll get there. It's just that I'm stupid and I put all of my money into my engine, and deal with stuff like tires and brakes like you would if you were Russian.

I mean they are designed to take extremes why do u think carbon rotors suck ass cold but are amazing on a race car your car is never gonna put that speed and braking force on a car but people are dumb enough to think because they're more expensive they're better

I mean rotors are just Iron. No matter how cheap they are, its the OTHER Components.

@@wolfitsolutions5502 there are a lot of grades of iron, some are softer some harder, just like other metals.

@@Njazmo I'm sure being DOT approved there has to be a MINIMAL requirement that the material has to be before it can be safely operated on a vehicle. Therefor as I stated, even the cheapest DOT approved rotor will do the job for basic driving. Its the other components that matter more. But the keyword is BASIC DRIVING. That means don't be doing Dragstrip runs on entry level braking components. As there are more durable braking solutions that are not only better for that but Safer. But for normal street driving it would be truly overkill. You would get better performance if you just used a bigger caliper and Master Cylinder. Also fluid plays a big role too.

3 hard breaking from 100kph to 0 and use a water hose. That will do. He is using hp car breakes so i think its 2x times durable then daily car.

haha

Christine's radio comes on by itself, playing: " Not fade away"

'Fade to black' by Metallica

it's an old mechanic trick btw :)

@@BruceCarbonLakeriver low cost dial gauge

ITS TOTALLY WORTH AND FREE WAY TO CHECK IT! :)

Pretty cool thing to learn, definitely will be using that as a quick trick rather than pull the rotors off and put them on the machine from now on

@@jameshunt5316 yep :D

More blyat maybe?:)

Hydraulic press channel blew up a rotor but they didn't use water, they just floored it till it got hot enough to explode. They caught it in slow motion too.

@@jldude84 That was a sick video. Everyone should watch it if they didn't already!

@@joe125ful dis guy got enough to go around :D kzfaq.info/get/bejne/m8yVjdiStd2wcY0.html

It is not a factory made Supra.

That's not a supra, by a mile. It's a fleet trim base level Z8. The 2022 86 is an admission that lineage matters and this thing is missing a few hundred horsepower. Toyota execs need to get out of Japan for a second... They seem to think 80km/h is in some way scary fast. In Texas, toddlers go that fast.

@@ch4.hayabusa wait what...?

@@ch4.hayabusa you know that a stock supra does not come with a 1000 horsepower but with 200 hursepurse! Ok

@@ch4.hayabusa its LS swapped ok but it is a supra

im your 54th like what a coincidence

@@MrWaheedulHaque 😊

@Hello Even how are you doing

my u ttube pllay button to u

That fluod is junk now

I was curious what fluid they were running as well... had to be DOT 5 or whatever their equivalent was. I'm also impressed it didn't burn the seals out of the pistons, or, if it did, the pistons still worked, and more importantly, released.

Life isn't always perfect

there is a difference between mechanical parts and aftermarker bumpers. You know that too

He's talking about cheap replica parts vs OEM. Not aftermarket.

😆

@@1one3_Racing yeah, like those they sell at AutoZone some are pretty good, but most are quite crappy.

its on their Russian channel kzfaq.info/sun/PLRK2xkMno6VZh6QLbQr0vULxNavUeNdHQ

@@geoacuraisuzu me who is slavic but doesnt speak russian 😂

Its not supra without 2JZ

@@patrikvnencak2923 MK5 is not a supra?

@@patrikvnencak2923 it’s a conversion

maybe

Thing is drift kitted out the wazoo. Would love to rip it, but the V8 is sort of a boner killer. 2j love

@@bakedandsteaked hey, there's still the turbo whistle. Not everyone likes led zeppelin I guess.

fuckin ls swap man

@@jakubvalenta4189 it’s a 1uz

It essentially got quenched into a steel bomb

This is the theory behind bedding in.

spin it on the crazy high rpm diff setup!

That’s pretty standard rpms for a rotor in final gear

Not much

Typically 4th gear is 1:1 to the engine RPM, meaning them having it in 6th has the rotor spinning faster then engine RPM, I assume they went to at least 4 or 5 thousand engine RPM so even in testing they went past 5000 RPM at the rotor

@@lrz98gaming5 You're forgetting the final drive ratio through the rear differential which should be somewhere between 2.5:1 or 3.5:1.

Another day in the sweet land of mother Russia ;)

Except on road bikes.

@@SoulAmazing92 True, but still the best option for safe stopping power. I used to broker bikes and have had over 200 including all the "big boy" R bikes.

Nuclear meltdown

🇬🇷🇬🇷🇬🇷 ;)

gia sou andrea

Pretty sure they'd either warp or shatter from temperature shock.

Lol you need more heat and bigger temp differenec..heat brakes on 1000C and use liquid nitrogen - 275C when brakes increasing heat so temp difference is 1275 +- in lets say 2-3 Seconds or less!

That was a great one

@@joe125ful nah, they just floored it and waited for the disc to go on it's adventure.

good vid from beyond the press i enjoy the mayham they pull off

@@fie1329 But its boring way way you know..

Do you remember them running the diesel van on brake fluid? Pretty sure they can't smell anything any more.

In Russia, brake burn is a national colonge distributed to all men.

It still does

Yeah, V8 supra... So sick that I'm on verge of vomiting

@@GarrisonsMadHouse glad you noticed me, well I'm just a normal person who watches lots of videos. Commenting helps the video maker right

@@warrior8154 He's trolling you :D

@@MegaSockenschuss He didn’t say anything bad. He only said that he sees him everywhere.

@@MegaSockenschuss nope he isn't

Fr 😭💀

I love how BMI Russian throws in American, British and Australian terms as though they are second nature.

@@twentyrothmans7308 A good interpreter knows what terms will be understood by his audience.

@Hello Jay how are you doing

@@lydialas8759 Hi. I'm good. How bout you?

@@jpress69 I’m good thanks for asking I hope we can get to know each other if you don’t mind

🙈😂

Yeah!

Lol i love that about this channel

Time and effort is of no consideration for Garage 54

Disc brake operating temp is 300 Celsius when they aren’t braking

@@spannaspinna Even a regular cars braking under little load on a flat surface the rotors get outrageously hot especially in the summer.

Those laser thermometers can't pick up the temperature of the shiny metal. They measured with the wrong device. They proof the point. No need to be accurate.

@@CyberlightFG yes i just wanted to point out. When they were yellow glowing they were over a 1000 C!

@@jansvasta2146 good point. The Hittites started working in iron around 1500 BC. They didn't need thermometers to do it.

@@the_mowron I sometimes do primitive pottery, love when the clay glows like that :D

USA is sue happy no life. They are Russians, they live life. Even if someone from US goes there and purchase it, and they sue for no reason then they will just disappear. 😉

Cooked the greese in the wheel bearings too

Probably, I’ve seen them com apart before and this is a very extreme test

Yes

That's why they don't use them on race cars

The new Supras are made by BMW.

1 holy hand grenade of Antioch.

Lulwud 🥴

@@niknik7470 watch Monty Python: Holy Grail. What shall we call you?!?! TiM tHe eNcHaNTeR!

@@jumpspace7414 i have been forced to endure the absolute torture that is that stupid movie. If you like it, then it's funny. If you don't, its a bad movie that tries too hard too be funny but still fails miserably. Its very cringe. I do however get the reference 👍

@@niknik7470 First shalt thou take out the Holy Pin. Then shalt thou count to three, no more, no less. Three shall be the number thou shalt count, and the number of the counting shall be three. Four shalt thou not count, neither count thou two, excepting that thou then proceed to three. Five is right out. Once the number three, being the third number, be reached, then lobbest thou thy Holy Hand Grenade of Antioch towards thy brake rotor, who, being naughty in My sight, shall snuff it.

I saw a caliper I must have missed the caliber🤣🤣

It's gonna raise the temperature since the brake is spinning at over 1000 rpm. its clearly gonna heat up faster than water dropping on the brakes

When you don't have a steam bath, but you've got a cozy garage.

as the saying goes: if you buy cheap, you buy twice.

@@MegaSockenschuss Non-led bulbs be like

On vacation*

Yeap they have Stalinium:)

Actually, I think Russians always used good materials. Their products are generally well-made I found. I mean, everything I've seen come out of that country lasts forever and ever.

Bet you say that to all the girls 👌