Epic and awesome that’s the kind of comment that makes this all worthwhile

Haahahah here is almost Midnight lol

@@fran.6496 🤣

Hey! The problem is not lubrication. In this model, there is another problem - the longitudinal play of the differential inside the housing, this breaks the bevel gear. To solve the problem, it is necessary to accurately set the gaps using thin washers 0.1 mm

If you want a basher/racer buy the 104001,if you want a speedrun car buy the 124019

I am buying the 104001 because it looks awesome and I can upgrade it down the road

yeah I have to agree, it doesn't feel that fast on the video for sure

He didn’t seem to max it out either? And yes it did not seem 58mph

Looks like 40mph

58? Looked like 45 max.. Proper speed run coming next?

@Tommy Vercetti Way better than the one that's in there..They actually work well

@Tommy Vercetti I suggested surpass hobby because it's a budget minded build

Right..That was not 58mph imo

@@philthyco1 🤭

I can get 50 on 2s with a 60 amp hobbywing and 3652 4000kv hobbystar. Bigger isn't always the answer to more speed 🤣 fun trying though

@@theguyinthecomments9543 Yea geared to the moon lol

@@philthyco1 so lol my point is you can go fast for less $ if you want to. Obviously you could get way more out of it if you put higher end castle stuff in but I mean c'mon, Its not quite hobbygrade and if you start putting big torque to it it's just going to shred the driveline. Unless that's what you're going for 😜

It won’t slide out the bottom of the mount hits the plastic side tray

@@DriftomaniacsRC As you slide it out lift it or loosen the bottom screws

Didn't you save the video and can't you use that as evidence that it wasn't delivered?

@@MrPhilbautista I did save the video and have send it in. But they still require written proof of loss (wtf)

@@RileyBanksWho That sucks. If they don't refund you, just post the video and hope it goes viral. Or better yet, write them and tell them that's what you'll do.

I showed that nearly a week ago 😂

@@PERTHWESTOZRC sorry pal. I didn’t see it. Good looking out though. Cheers!

@@gilflores789 feel free to subscribe mate 👍😁

It's not a 380 ..380 is only 30mm long the rotor inside that motor is 50mm long..It's not a 3650mm like a normal 540 because there is 2-3mm of heatsink..So it's a 3350mm or so..A 380 is 2830mm..This motor can spin up rpm a bit faster than a normal 3650 because it has a bit smaller rotor(circumference) but keeps similar torque numbers because it is still full length rotor

I run a similar motor in my Integy buggy doing nearly 70 geared up of course lol

@@philthyco1lol prove it. I never said it was a 380. I said 390. It really is a 390 motor in a finned can. Open it up.

@@apexelite2968 Ahh I read that wrong lol but it's still not a 390 either as a 390 is a 2835mm ..I've had a bunch of f540's.. I know what I'm talking about..Prove what? My Integy? I had it doing 50 on stock system and put in the surpass f540 4370kv up from 3000kv stock and it straight up fly's! ..I only have videos of the stock system as I've moved to the mountains and haven't found a place I could do speed runs at yet but I will this summer..Now with that said Richie's Wltoys was not doing 58mph but the motor is more than capable of it.. Cheers

@@philthyco1 wrong. A 2430 is a 370. A 380 is a 2838. A 390 is 2845/or 2848 which is what's in your f540 can.