No video
Drill bit sharpening jig for beginners
Рет қаралды 6,668
Күн бұрынSo you have a few drill bits that look like mushrooms and you want to restore them to a functional state. That is good, join the sharpeners, you can do it by hand but a jig may be better when starting. And this one is for beginners not only because is relatively easy to use but because it is also inexpensive.
Link to the clone, made by General
amzn.to/3PYo0AB
@billsmith1770 9 ай бұрын
i recently bought one and i love it . if used properly , it will leave bits with chisel point centered . some more expensive sharpeners rely on counting how many times you grind on each side , which doesn't seem very accurate to me .
@davidjames1007 Жыл бұрын
Great video however, my instructions say 1/16" overhang and you are saying ½ diameter overhang. I have always had issues with the overhang resulting in a long chisel edge. I see your bits also have a very long chisel edge. I will play some more to see if I can get good repeatability
@caskwith Жыл бұрын
I have found an overhand approx equal to the diameter of the drill to work best, but sometimes you still need to make changes to that to get the correct angles. I don't use the lip stop either, I set by eye, works better for me.
@ekhles104 3 жыл бұрын
very very very excellent i like it
@asquaregarden 3 жыл бұрын
Thank you.
@mitch3384 Жыл бұрын
I'm considering buying one of these jigs.. can it produce a 4-facet grind?
@miguelmantecas2513 3 жыл бұрын
Buenas ,seria posible este video traducido en castellano seria muy interesante ,un saludo
@robertodebeers2551 3 жыл бұрын
Too damned complicated.
Garena Free Fire Global
Рет қаралды 9 МЛН
Dorel Borlea
Рет қаралды 141 М.
Official Welding & Farming Archive
Рет қаралды 20 М.