Drill Press Basics

Drill Press Basics - WOOD

Рет қаралды 120,270

5 жыл бұрын

Whether you're new to the drill press or just need a refresher course, WOOD magazine's Craig Ruegsegger covers the basic operation of this machine. Learn the proper technique to using this tool, and the terminology associated with it. These are just the building blocks as you learn to master the tool for safety and accuracy.
Subscribe to the WOOD KZfaq channel: kzfaq.info_...
Subscribe to WOOD magazine: www.woodmagazine.com/subscribe
Get digital issues for iPad, Kindle, and more: www.woodmagazine.com/digital
Official website: www.woodmagazine.com
Shop for woodworking project plans at: www.woodstore.net?a=youtube
Read tool reviews from WOOD editors and other real woodworkers at: www.woodmagazine.com/review
Facebook / woodmagazine
Twitter / wood_magazine
Pinterest / woodmagazine

Пікірлер: 64

@juliettedumouchel6021 11 ай бұрын

This press has worked like a charm for my projects kzfaq.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

@stephenqueen6211 5 жыл бұрын

The round disks that are left over from using the hole saw or wing cutter are called round tuits. They are very valuable. When you have a friend who needs to do something, they'll say something along the lines of "I'll do that when I get a round tuit." So you can give them one of your round tuits, and they can get the job done.

@myothergem 2 жыл бұрын

Thank you Steve McQueen. I will tell my husband that I learned what a round tuit is.

@neville132bbk 2 жыл бұрын

Best coated with tartan paint from specialty hardware shops.......

@miamartinez9260 4 жыл бұрын

I'm going to have a test on how to work a drill press and this DEF helped me out!!

@jerryjohnsonii4181 5 жыл бұрын

Thanks for the knowledge

@jeetray11 2 жыл бұрын

I have watched it for the 2nd time in one month's time. And learnt few things. I have a task to cut a 2" hole on a board and was wondering how I would do it. I got excellent ideas here. Thanks.

@uktony1525 5 жыл бұрын

Great tutorial.

@TonatiuhMellado 5 жыл бұрын

Muy buen video, gracias por compartir

@gaborprudnecio 4 жыл бұрын

thank you Craig.

@asinheaven Жыл бұрын

Thank you for the drill press chart. Very useful resource!

@creamtopperwazoo1867 8 ай бұрын

Thanks for the informative video. I just bought a new drill press today and I am still assembling it. I am building an end table and I am using dowels. This machine will make the holes perfectly.

@eaglesoarsusa 7 ай бұрын

I learned about the drill press 60 years ago in wood shop. I had forgotten many of the setups here, so it was a nice refresher. I would only add that he needs safety glasses as some wood throws splinters and a mask would help not breathing in the wood dust. In creating the video I understand why he did not have those as it would be difficult to talk and show the setups.

@dreamlookautodetailingauto3353 2 жыл бұрын

Very good instructional video! Thanks

@joelpless4214 Жыл бұрын

Very helpful; thank you. On my wish list.

@valerielevitt3016 3 жыл бұрын

Thank you.

@shrinivaspadmaputra1660 3 жыл бұрын

Thank you!

@untro7287 3 жыл бұрын

Yup, thats WOOD!!

@djtblizzle 2 жыл бұрын

The drum sander and wing cutter make me want to go out and buy a drill press right NOW!!! Saved and subscribed!!!

@cattleNhay 3 жыл бұрын

I got the same drill press but missing the top belt cover...so thanks a lot for belt diagram!

@briansworkshop01 5 жыл бұрын

Fantastic I will look out for more videos your mag is not available in the UK ❔❔👍👍👍👍

@justarandomfrogonyourlawn 3 жыл бұрын

Had to watch this for class

@Kickedupjay 3 жыл бұрын

same

@andreortega5015 2 жыл бұрын

same

@Saintcustomwoodworking Жыл бұрын

Thank you for drum sand tip !

@neville132bbk 2 жыл бұрын

I have read, recently, that using a hand drill as mini drum sander is unkind to the bearings because of the lateral pressure. makes sense to me. As a fan of bandsaws and mid power drill presses, do you have any comment about using presses as a substitute for a drum saw..especially one which oscillates in operation.

@staceycollins9232 9 ай бұрын

The wing cutter might be exactly what I need. What size wing cutter did you use? I need something to replace the 2” forester bit. I’m making circles but not holes in the wood.

@oakchatsccchamberofcommerc2868 4 жыл бұрын

Very well done. I would however like to see you use safety glasses as they are very important when using any kind of tool.

@barlow2976 4 жыл бұрын

And he has taken off the safety guard from the chuck- what is he thinking of ??

@miamartinez9260 4 жыл бұрын

My woodshop teacher always tells us this

@drewdolan 4 жыл бұрын

Live a little!

@charrua1029 4 жыл бұрын

Hi. Do you think that a 1/4 hp drill press is strong enough to cutting 4 inches circles with a hole saw on a 1/2 inch board. Thanks in advance.

@neville132bbk 2 жыл бұрын

1hp==746W....so a 250w machine might, I Think, be pushing it a bit. 4inches is 100mm.....and I've never tried using holes saws that wide---I'd set a wing cutter at 50mm from the centre so it cuts 100mm diameter. And I'm used to machines of over 500W, so that's 2/3 hp.

@zeinharishasibuan4707 5 жыл бұрын

Hello am from Indonesia, am beginer in woodworking. Well done sir very usefull video for beginer like me. Keep uploading more video, five thumbs..😁👍👍👍👍👍

@ishtlutz1261 2 жыл бұрын

THANKS GUY!

@user-dr9hx9ky3t 3 жыл бұрын

im doing this for school:(((

@Kickedupjay 3 жыл бұрын

lol same

@barbdyck7812 3 жыл бұрын

same

@michaelelliott3295 7 ай бұрын

I really enjoyed the video and found it helpful. Aren't safety glasses always a best practice?

@waltmooredanwilson8754 Жыл бұрын

Thanks for sharing your video. I enjoyed watching. Take care and God Bless.

@staceycollins9232 9 ай бұрын

I’m trying to use a 2” forester bit. Which drill press would I need? My Ryobi is not powerful enough

@violettray2679 4 жыл бұрын

This guy is a natural teacher.

@adamscoolthings3316 5 жыл бұрын

What about forsener bits

@keithnielson9948 Жыл бұрын

Nice video that I would use in the classroom. However the use of safety glasses in the video was not shown.

@nenadsha 2 жыл бұрын

can someone explain to me how to drill a 4mm hole in a wooden stick that is 1cm in diameter and 10cm long

@Wood 2 жыл бұрын

Some ideas here: www.woodmagazine.com/search?q=drill+dowel

@Kickedupjay 3 жыл бұрын

doing this for school lol like this and reply if u are to what state me wisco

@ThornedMetal 3 жыл бұрын

That's dank, same

@exploreyourweb 9 ай бұрын

Go the Bribie Woodcrafters 😀

@psychosalad6653 3 жыл бұрын

Woodworking class sent me here

@TheHibener 2 жыл бұрын

Why is a big machine shaking that much?

@multitalented8484 2 жыл бұрын

It wasn't shaking

@frank_texas7400 4 жыл бұрын

Not enough torque to run the wing cutter

@iridian 3 жыл бұрын

11:10, you showed earlier that you can turn your table. Next time do that one action instead of unclamping twice and reclamping twice. Lazy people do three less actions ;)

@Ramsdl52 3 жыл бұрын

Is a drill press even really necessary? between a plunge router and cordless drill which most woodworkers already own you should be able to do anything a drill press can and then some. what am I missing here?

@alexdeharo9036 3 жыл бұрын

power and accuracy. He said that in the video.

@pavelow235 3 жыл бұрын

Hard for me to believe that you could get the same trueness with a corded drill, I think the drill press excels at getting perfectly vertical holes. They aren't a huge investment, either, under $300 dollars, space in the shop might be an issue though.

@juliemandell 2 жыл бұрын

Five years ago I bought the cheapest one Wen makes - I think it was $59 - and used it to make all the holes with a 35 mm forstner bit for the euro cup hinges when I built new shaker style cabinet doors for my kitchen. I tried freehanding the first one but there was no way I could hold the drill steady enough to drill the nice neat cups for the hidden hinges. With the drill press it was a piece of cake.

@neville132bbk 2 жыл бұрын

@@juliemandell A 450W drill press and a set of good Forstner bits... for Christmas, please :-) Never used a router.

@Peter-976 2 жыл бұрын

You`re missing common sense when you think a cordless drill can do what a drill press does.