Since my drilling machine did not have a normal handle for lifting the spindle, it was decided to make it myself.
The NS-Sh drilling machine, unlike other machines, has a combined clamping and lifting mechanism.
Since there are no drawings for the handle, I picked up the dimensions in place.
Pen bought from the Chinese s.click.aliexpress.com/e/_dXo...
What's in the video:
00:00 - What this video is about
00:19 - Old spindle lift handle
00:40 - Place for a lamb
00:51 - Remove the handle
01:05 - Appearance of the clamping mechanism
01:31 - Cut off the old handle
01:40 - Break out the thrust ring
02:13 - Cut off the hairpin
02:31 - A set of washers for fixing the pinion shaft with a clamping device
02:40 - Bushing for attaching the handle to the pinion shaft
03:17 - Fit the sleeve on the shaft
03:34 - Pen pattern
04:20 - Cut the handle blank along the contour
04:43 - We scald the handle and sleeve
05:03 - We form slots for the correct fold of the handle
05:40 - Bent handle blank
05:51 - Clamping screw
06:15 - Fixing the rotating handle
06:26 - Holes for attachment to the shaft
06:45 - Pen painting
07:00 - Finished handle assembly
Links to all parts of the video on the NS-Sh machine:
Part 1: • Сверлильный Станок НС-...
Part 2: • Сверлильный Станок НС-...
Part 3: • Сверлильный Станок НС-...
Part 4: • Сверлильный Станок НС-...
Part 5: • Сверлильный Станок НС-...
Part 6: • Сверлильный Станок НС-...
НСШ # PULLEYS # ASSEMBLY # DRILLING