I am like 3 weeks in to learning to do things with epoxy resin, and I feel like I hit the jack pot with your channel. I am a hobby cake decorator and I am attempting to make a 3D dragon tumbler that I thought was an original idea..NOT…lol…like cake decorating I have noticed so many wonderful people like yourself willing to share their talents with newbies like me. Thank you.

Can I give this tumbler like 10 hearts! SO ADORABLE! ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️

Girl.... I just found your channel and I have to say I have binged half your videos! You. Are. Amazing!!!!!!! 😍😍😍

So glad you did this, I LOVE POOH BEAR! 🥰🥰❤️❤️ I’m going to do a cup like this for myself an I just turned 30. 😁

Absolutely love your tutorials I'm just getting started myself and my comfort zone is glitter and tattoos right now but I'm going to try some of your tutorials I don't have a great deal of supplies yet but I'm getting there thanks for sharing 😊

That’s great. I haven’t done the drip because of the epoxy myself. So it’s nice to see a different easier way!!

That is a great idea. As a new beginner I feel that little trip will cut the process time way down. Ty for the tip and keep up the good work n videos!!!

Wow! I'm so glad you did this method. The epoxy method was so messy and I messed up multiple cups and had lost hope. But I just tried this and omg it works wonderfully and if I mess up I can wipe it off. Thank you!!

Cute cup and love the corn starch trick!! I've been looking for a way to do it because I'm epoxy free. If you don't like epoxy you should try Crystalac products and ditch it for good. Then you can get out of your shed and do your tumblers in the house. If you have the space lol. There's no PPE needed. I apply it with my bare hand. It's that safe. Come on out of the shed with me and thousands of others Courtney! No more space heaters and blow torches. No more bubbles and fish eyes. It's a different process but better for you. The cost equals out to the same because you're not buying gloves, mixing cups & stir sticks, masks and no buying tons of spray paint. But you can use up what you have. Go check it out!

Cute cup! Thanks for the cool drip hack!💜

Wow!!! Absolutely beautiful! I love Winnie the Pooh too! You did an amazing job! Thanks for the tips, just added some corn starch to my shopping list for tomorrow. Thanks again!!! 🥰

I use puff paint for my drips. Works like a charm and no mess. You put it all around the top of your cup then tap the bottom on your hand until you get it the way you want.

Thank for the drip idea with mod podge! Great tutorial! I love your channel!

I tried this after trying quickset. The mod podge method worked and I'm just waiting for it to dry. Thanks for sharing.

your art makes me happy!!!!

Thank you, you always make me smile😇😇😇

Girl! My eyes nearly popped out their sockets when I saw all that cornstarch spill out. 😂 Good thing you were able to fix it.

You are so sweet. Love your ideas, designs, and how things turn out. thank-you.

I’m going to the store to get corn starch n more mod lodge. I’m making beer mugs You read my mind for my frustration tonight.

I love how pooh is a clear waterslide, so it makes him sparkly

Messy means greatness never apologize girl!!!

I love that but I thought it would crumble off. Great job as always!!

Love it! And girl we have the same brain I swear! I just pinned a ice cream cone tumbler to my pinterest board 2 days ago lol Thanks for the tip I will have to try it!

Thank you for your time love this trick and tutorial

Adorable...love it!!

So cool, love the ice cream cone cup too 💟💟💟💟💟

you can consider using puff paint..it dries nicely and works perfect for drips and/or mix nice and thick in your epoxy

Found your channel and subscribe to it and I Love it I even requested to join your Facebook group. I’m just starting out making tumblers and your tutorials are so easy to follow. Been going back on your channel and watching your older videos too.

I love watching your videos. You do things like i do… fast & sometimes ratchet. Like how you applied modpodge… I was like “this is a girl after my own heart!”

love BOTH cups

Super helpful! Thank youuuu 😊

Thank you for your help

Super cute and way easier than epoxy!

Hello Courtney. I love your tutorials and all your great ideas!! May I ask what speed you recommend for the turners?

I love it, only thing I have trouble with is the waterslide sometimes I can see the film through the epoxy especially lettering yet you do it and it looks amazing

this turned out great - TYVM - for the hint - this I think I can handle lol

What mod podge did you use? I have the matte and tried it and it cracked.

The creativity that comes in making these tumblers is amazing!!! Do you just do cups? Don't mind my comments I'm watching your videos out of orders 🤣🤣😂

I’m definitely trying this when all my stuff comes in I love Winnie the Pooh 😍

Hi came across your video, so to seal the cups that have drips on them would you know if I could use krylon would be ok to use instead of epoxy for sealant or the mod podge acrylic spray? Thank you 😊

Thank you so much for this!! I'm going to be trying my first drip cup. Can you add mica powder to color this mixture (I'm trying to do a ow in the dark drip)?

Thank you for showing this method. I made my very 1st drip tumbler using this method. I'd love to show a pic. Not sure how to put a pic on here.

So beautiful

I love your tutorials! I’m new to making tumblers and I didn’t want to use epoxy so I’ve been making them with Crystalac Brite Tone. It’s non toxic. Have you ever tried it? I just don’t know about the longevity of it. I would love for you to do a video on it!

I LOVE your channel(s), been following for awhile!! I have to say that you make things easy to follow & LOVE the hacks! Also, on the tumbler turners, what do you have attached to the foam? Just looking for expanders & saw your idea :)

It turned out good, thank you for sharing but I also know you can also use sculpy bake on for the drips for anyone that might want to try it this way of if you could do a video on a drip cup using sculpy that'd be great

There is a glitter from recollections at Michael's that is a Winnie the Pooh yellow, called Sunflower:-)

Beautiful after putting the glitter did you put the epoxy right after that

I made a Pooh cup just recently with the drip, she loved the cup

OMG I am so glad I found this! I was asked to do a drip cup and it was so scary watching all the epoxy videos, this is life and worked wonderfully!! thank you!!

That cup is SO cute. Thank you for sharing. Could you tell me the color of the spray paint you used? I could barely hear you when you said it and when I click on any of your links, they don't go to the product. Thank you 🙂

quick question I use mod dodge and corn starch it has never done this to me before, but I applied my epoxy last night over everything and I woke up this morning to take pictures but my drip are kind of soft even with epoxy over it remind u just 1 layer of epoxy. Should I add two more layers of epoxy will that help or is it trash?

What color did you use for the cup and then color you used for the drip?

Do you print the water slides as mirror image to be able to put them on the way you did? I always have trouble putting them on right side up, so I gave up on them! But u did it so easy!! 😃😃

i'm just now seeing this few years later 😂 but how well did this hold up?

Great hack! Tysmfs and who doesn't love some Pooh Bear❤

Courtney can you sand the drips when dry if you have sharp points? I hate epoxy method of drips just can't hit timing right. Great inspiration. Thank you my dear friend for the time you spend teaching us and you inspire me so much. You are so lovely. hugs Sheryl winnie the pooh is adorable. 🍯 🍯 🍯

How was she able to slide the written off to the cup I love the ideal

Love this!!! 💜💜 my daughters fav is also Winnie-the-Pooh. She was a huge fan and even had a Winnie-the-Pooh room when she was young. Gonna have to make her one. Your video makes it look easy but im certain I won't master it like you did it in one try 🤣 do you have a link for the Winnie-the-Pooh waterslide?

You said that you just waited an hour or so for the mod podge to dry before applying epoxy correct? I am just wondering if the mod podge will still be a little soft to the touch since it is thick?

I am just getting into resin/tumblers. How can I prevent the resin or modge mixture from getting inside the top of the cup? Or do you know how to get it out of it?

Love love love this!! What is your FB group? I get an error page when I click on the link in the description ❤️❤️

I love your tumblers...so cute! I don't like epoxy either...is there anything else to use other than epoxy that will hold up well?

What was your image on that made it slide off easy?

Hi! I am new to all this.. what did you print your pictures onto for it to just peel off and what did you apply over them that was clear? TIA

Love it! I'm new to your videos and have a question. You make both kinds of cups? Epoxy and BT? Can this be done on a non-epoxy cup, too? I took a year off from making cups due to my epoxy allergy and just started up again. Unfortunately, so did my allergy flare up! I am interested in trying Crystalac but have tons of questions before I make the plunge!

I have never used epoxy is there anything you can use to keep the cornstarch mixture instead of the epoxy ?

I sure wish I had seen this before I bought the CCDIY epoxy thickener. Courtney, do you use gloss spray paints?

Wonder if you could pipe it on using either a pastry bag or zip lock bag?

Do you think this would work for the chamoy drips as well?

I have a question I have watched so many different tutorials were you the one who uses or have used brite tone by crystalac. I have used that on the few that I have made. Did you order that straight from the company? I’m kind of afraid to use epoxy and don’t know where to start with it what do you recommend

Love this ❤️😍did you have to spray your Winnie the Pooh water slide white?

So pretty 😍, what is the name of those kind of stickers ?

What does the cornstarch do? Will it turn clear once it's dry?

WooHoo...I just stumbled across your video. I make fake stuff including regular mugs of hot chocolate (no rolling tumblers). I want to see the video of you applying the epoxy which I detest or can i just spray the cornstarch/Mod podge with a sealer ?. TIA

So cute! Do the drips actually run or do you have to shape them? I know you shaped but curious

Would baking soda work just as well? Or does it have to be cornstarch?

What was you soaking the papers in? And how did it slide off?

Can I drop paint drops on tumbler while epoxy is wet and spinning 5:49

I am haven't a problem getting to the description to get your info. I think they did and up grade and I can't find it. Can you help me. Thanks Brenda

Do you have a discount code for makerflo? I am about too try them out and see how I like their products. Thx

What was that liquid that you put the two images in that it allowed you to transfer it to the cup?

If you use gloss spray paint, what do u seal it with! I used the rustoleum semi gloss clear and the spray paint just immediately started cracking.

Did you have an issue with your drops cracking because mine started to crack while it was drying

How do you clean your make up brush? I also try to clean them before they dry but sometimes when you get in a groove you forget ya kno?

What color was the yellow spray paint? I love the tumbler

How do u get the winnie pooh to come off like that on the tumbler so easy what kind of material is it?

How long till you epoxy the drip? And how long for the whole cup to dry?

Do you do your waterslides backwards? Or do you just mirror them?

How do you get the images on the cup? Did you just print the images out and put them in water?

What do you guys use to get the over spray and glitter out from inside the rim of the tumbler?

Do you know if this can be used with crystalac brite tone?

I had this held up. I bought a cup last year. I can tell it was done with corn starch and mod podge. Its pulling up and resin is cracking. Im also baffles how an hour of dry time for mod podges and corn starch was enough time to dry for resin. Im wanting to fix my cup because its the prettiest i have boughten. The drip came completely off.

As a cake decorator, I just see myself using piping bags for the the drip effect.

Are you images just regular prints, vinyl? Can you explain? Thank you

Absolutely love this tutorial, can you tell me where you got the Winnie the pooh applique please? I would love to try this. thank you

Can you use any cornstarch or does it have to be 100 percent pure

Can you share the Pooh and words waterslide svg

It seems like that much mod podge in drips should cure or dry more than an hour. Did you have any trouble after using them?

Do really need to use epoxy? can I use just mod podge? just want to know because I haven't starting to use the stuff?