Drive belt and variator replacement on a 150cc GY6 Chinese scooter

  Рет қаралды 16,109

Lab Coat Paul

Lab Coat Paul

Күн бұрын

The drive belt and variator in your Chinese scooter can last up to 5,000 miles.
Torque specifications:
Clutch nut: 36 ft-lb or 49 Nm
Variator nut: 36 ft-lb or 49 Nm
Transmission belt cover bolts: 7.3 ft-lb or 10 Nm
Parts:
Variator kit
www.partsforscooters.com/164-...
Belt size: 835 20 30
www.partsforscooters.com/106-...
Tools:
Rolling wrench CVT holder
www.rollingwrenchdenver.com/c...
0:00 intro
0:15 remove CVT cover
0:43 inspecting the belt
1:32 remove drive face and variator
2:15 inspect variator
3:43 remove kickstart gears
4:33 inspect clutch
6:02 measure the belt
6:58 install clutch
8:04 install variator
9:28 common belt sizes
9:42 install the belt
10:18 how the CVT works
11:16 install CVT cover
12:17 conclusion

Пікірлер: 14
@carly-beatz-DJ
@carly-beatz-DJ Жыл бұрын
Without doubt the best GY6 maintenance vids I've seen. Thank you so much!
@SLAYER-nm5zw
@SLAYER-nm5zw Жыл бұрын
Very underrated channel. Well done sir
@frednetherlands887
@frednetherlands887 8 ай бұрын
Thank you. The variator locking tool can be found for less for those who have less to spend.
@dendys04
@dendys04 Жыл бұрын
4:26 yeah i was removing kickstart mechanism and forgoted to this little bushing and it flyed out thanks god nothing happend
@Yamazaki112
@Yamazaki112 2 ай бұрын
I have a Ryobi 160 lb torque impact wrench but it will not take off that bell clutch bolt no matter what I do. I also have a 250lb ft. torque breaker bar that also can't seem to remove the bolt. Idk why I can't just use a screwdriver to hold the Bell clutch in place and break the bolt using the torque wrench or impact wrench.
@chrislavalley4062
@chrislavalley4062 Жыл бұрын
I have a question if you need to replace the clutch output shaft how do you put a bearing on the new one
@charizard365
@charizard365 16 күн бұрын
Would this fit most Chinese 150 cc I have a taho 2022spark?
@alexandernaigbaver3302
@alexandernaigbaver3302 3 ай бұрын
What screwdriver you using or recommend?
@ironhead320
@ironhead320 Жыл бұрын
What would you recommend for a quicker take off lighter weights or heavier
@LabCoatPaul
@LabCoatPaul Жыл бұрын
lighter weight rollers will keep the engine at higher rpm and give you better acceleration
@carolinehaenel5461
@carolinehaenel5461 Жыл бұрын
Why does my belt keep breaking on my 150 cc Chinese scooter. ??
@dendys04
@dendys04 Жыл бұрын
the rear half pulley is broken buy a new one and replace it
@bocephussammons6298
@bocephussammons6298 Жыл бұрын
How many miles was this
@LabCoatPaul
@LabCoatPaul Жыл бұрын
8,000 miles
Honda PCX 125 - CVT Removal / Installation - Variator, Clutch, Drive Belt, Rollers
14:16
GY6 / 150CC CV Belt Removal, Clutch Replacement & Springs
16:05
electronicsNmore
Рет қаралды 338 М.
ОСКАР vs БАДАБУМЧИК БОЙ!  УВЕЗЛИ на СКОРОЙ!
13:45
Бадабумчик
Рет қаралды 2,9 МЛН
Incredible magic 🤯✨
00:53
America's Got Talent
Рет қаралды 36 МЛН
Каха ограбил банк
01:00
К-Media
Рет қаралды 11 МЛН
KINDNESS ALWAYS COME BACK
00:59
dednahype
Рет қаралды 110 МЛН
GY6 50cc variator removal / roller weight change
5:42
Lagmeister
Рет қаралды 1 М.
How To Tune Your Scooter Variator - Scooter Street Tuning Guide
12:08
Scooter Street
Рет қаралды 211 М.
Simplest Way To Replace A GY6 Scooter CV Belt
6:13
electronicsNmore
Рет қаралды 687 М.
How to Tune a 150cc GY6 CVT - Main Clutch Spring and Variator Weights
8:50
150cc GY6 Go Kart CVT Upgrade & Swing Arm Bushings
17:22
Red Beard's Garage
Рет қаралды 119 М.
Замена тормозных колодок на Мерседес
0:27
Автосервис Мерседес MBSEMENOV
Рет қаралды 2,6 МЛН
дед сломал мотоцикл за 5млн🤯❗️
0:31
sila_pelmeney💪
Рет қаралды 583 М.
Respect🥺
0:35
Armada Motors
Рет қаралды 2,3 МЛН
Oyuncak Direksiyon İle Bisiklet Yönetmek #shorts
0:26
Osman Kabadayı
Рет қаралды 4,7 МЛН
Драг рейсинг это легко! #automobile #dragrace #jzx100 #rdrc
0:35