How to Roll Fenders Properly!

No video

How to Roll Fenders Properly!

Рет қаралды 74,381

Күн бұрын

Fender Rolling 101: Simple Tutorial [4K]
Learn How To Roll & Pull Your Fenders Properly by Following this Simple Step by Step Tutorial!
Project Mx5 Miata is about to drop low on coilovers, but first, we need to roll and pull the fenders to make sure we don't have any rubbing issues. In this video, I show you the proper way to roll fenders, so you can try it yourself on your car. It's the same method I use for all of my fender rolling jobs. Let me know if you have any questions in the comments below. Thank you for watching!
👇Specialty Tools for this Job:
Fender Roller: amzn.to/3APkUs3
Heat Gun: amzn.to/3AOrWgs
Thermometer: amzn.to/2XXJd8A
SUBSCRIBE to @DriveItRyan and engage with me as much as possible in the comments to help support the channel!
Connect With Me on Social Media:
Instagram: /
Facebook: / driveitryan
Check Out My Team Channel The Slip Angle @The Slip Angle
Instagram: / slipanglemedia
👇 Helpful 🛠 Tools:
🚘 Low Profile Jack: amzn.to/3jfTyVx
🤌 Pinch Weld Jack Pads: amzn.to/2WrUI7v
3️⃣ Ton Locking Safety Jacks: amzn.to/3kq1YsJ
◾️Frame Rail Jack Stand Pads: amzn.to/3sRAYGy
🧰 Tool-Kit I Use Every Day: amzn.to/3DjhD5W
🙌 My Favorite Tool: amzn.to/3mGJt5U
🔩Anti-Seize Used on Bolts: amzn.to/3sRTsXd
Equipment I Use:
Camera - Canon Eos R6: amzn.to/3g6CfVM
Lens - RF 24-105 f/4L IS USM: amzn.to/2VaKSmf
Rode VideoMic Pro: amzn.to/346oSN4
GoPro: amzn.to/34D8PaA
Neewer GoPro Mount: amzn.to/3p8WuV3
GoPro ND Filter: amzn.to/34zSnIg
Laptop: amzn.to/2JC7rea
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting so I can continue to provide you with free content each week!

Пікірлер: 55

@travisstamp7428 Жыл бұрын

I think I'm just gonna take my fender roller and heat gun to the junkyard and practice on a cpl cars before I attempt my own.

@DriveItRyan Жыл бұрын

Haha not a bad idea! Patience is key with this kind of job.

@supertruckertom Жыл бұрын

Brilliant

@anik321 10 ай бұрын

Brilliant idea honestly. Can't believe didn't think of this

@kuriencary 11 ай бұрын

My favorite part of the entire video is the Tai Lopez bit. Hahaha legendary. I'm glad there's someone else that loves to use the knowledge reference as much as I do

@robertvillarino4280 Жыл бұрын

Best roller slash pulling fender video I watched,thx

@DriveItRyan Жыл бұрын

Thank you!!

@TheMikecanit 2 ай бұрын

nice vid brotha bout to roll mine after years of dealing with fat fenders on my civic. thanks! made it look easy

@jimiheil8007 9 ай бұрын

The best tutorial on fender rolling I could find!! Thanks friend!!

@user-il1fv7iv8m 7 ай бұрын

Brilliantly worded and appreciate you taking the time to explain! WELL DONE

@predatorpwr 2 жыл бұрын

Nice and concise! Reminder if you’re an idiot like me, don’t roll over the plastic bits and bobs, they don’t flex so good…lol

@DriveItRyan 2 жыл бұрын

“Plastic bits and bobs” made me actually laugh out loud 😂

@dtna 10 ай бұрын

I wish I had one of these in the '70s. I used a baseball bat, didn't heat the paint and chipped the paint it a little.

@KINGFOOSA_YT 6 ай бұрын

Amazing video and professional thanks for the knowledge bro

@histandard31 2 жыл бұрын

Great info, planning on using this to roll my fenders soon!

@PolitiqlyIncorrect_ 10 ай бұрын

The Tai Lopez clip earned you a like LMAO

@moStallion 2 ай бұрын

Is there a measuring tool or do you just do it by eye if they're all even

@davidmccaughan2710 2 жыл бұрын

Any suggestions on preventing rust in the future? Other than not driving it in the rain😂 Undercoat before rolling?

@DriveItRyan 2 жыл бұрын

Are you talking about on the inside of the lip? I bet a little POR or some type of undercoating would be a good idea for just a little added protection and peace of mind. Rust is the absolute devil

@frankdeanda4930 8 ай бұрын

Can you roll over fenders from a 1957 Chevy 3100 pick up for bigger tires?

@The89TSi 8 ай бұрын

Now I never heard you say this is okay to do with Wraps. Can I still do this with a wrapped car or do I need to do more steps?

@mistermister8998 4 ай бұрын

Did you have to put the car into neutral for the rear wheels?

@brandon33371 Ай бұрын

shoulda rolled mine now my sidewalls all toast fuckkkkk

@gregnokes9880 2 ай бұрын

Dude you left your license plate # in the video.

@GlycerinZ 9 ай бұрын

what if i dont' care about cracking the paint job, do i still need to heat the fender with a heat gun?

@bobbyrios2k223 2 жыл бұрын

Yeah.. ill pass on doing it myself 🤣 if i ever needed it i know a guy thats done thousands. But its good knowledge to show peoples! 🙌

@DriveItRyan 2 жыл бұрын

I’m willing to bet that guy knows what he’s doing after thousands!! When I was younger I couldn’t find anyone to do it in my area, so I figured I might as well take a stab at it. It certainly is time consuming though 😂

@bobbyrios2k223 2 жыл бұрын

@@DriveItRyan yeah that dude travels up and down n.ca and s.ca to do em. Its nuts! Yeah it looks time consuming

@LuisTorres-dw1rm Жыл бұрын

@@DriveItRyan I live in CT as well, would you happen to know a place that does them now?

@markk4708 Жыл бұрын

@@LuisTorres-dw1rm I'm in CT too. If you find a place to let me know. I need mine rolled too!

@frankdiaz6691 8 ай бұрын

Awesome

@does_not_matter_91 2 жыл бұрын

I did mine too fast. Got some cracks on the front, and bent edge. I had to give the car to body shop, and they cut the lip in many places, made it flat and welded, than filled and protected so the water wouldn't stay there. But i didn't keep the heat that much, and that's probably where i screwed the job :D

@DriveItRyan 2 жыл бұрын

Yeah a lot of people cut a little slit first, but I try to avoid it if possible. Keeping an eye on the heat and going little by little is definitely the key, but by the 4th fender, it does get very tedious lol. Sry about your experience! Sounds like it’s all good now though at least!

@scarymovie636 Жыл бұрын

120 fahrenheit? So 50 celsius?

@danielborth7753 10 ай бұрын

Where can you get one of these tools or can I rent one somewhere

@Genesislights Жыл бұрын

So what happens when you have plastic fender liner? Did u remove this or roll with it?

@stg2913 Жыл бұрын

I was wondering the same. I’d assume to remove. What should be done here?

@RyBreezzy Жыл бұрын

My tires stick out a bit. May be less than 10mm. Is it possible to pull out the fenders using this process so my tires sits flush on the fenders? Thanks

@sopretty43vr 11 ай бұрын

it is

@mattwiser7982 2 жыл бұрын

I bet that miata is a lot of fun in the Hollywood Hills but you know what’s even better?

@DriveItRyan 2 жыл бұрын

Say it Matchew, Say it!

@glendonhorne7196 Жыл бұрын

Thanks for the video, very clear and concise. 👌🏼👍

@ArtTripper Жыл бұрын

Can this tool be used on a car that has wire wheels and no studs ?

@DriveItRyan Жыл бұрын

I’m not entirely sure. It should work as long as you find a way to secure it to the hub.

@travisstamp7428 Жыл бұрын

Just take off the adapters for the wire wheels and use the studs that the adapters bolt to.

@donsterr 11 ай бұрын

Unfortunately it’s not a one size fits all thing..

@roscoes-wetsuit1 2 жыл бұрын

What was your wheel setup for this roll?

@DriveItRyan 2 жыл бұрын

For now I just have 14x7 +19 Rpf1’s. There are pics on my IG @DriveItRyan

@PH020 4 күн бұрын

Dude just going to roll the fender with a bolt in the way... first clean the inside fender and remove clips

@neilobusk 2 жыл бұрын

4k.....ryan.....its like them awsome porn vids...but you need to switch to 1080p for smooothnesss... :) so i have been told.... covid....temperature lol...reallly... its an awsome..tooooll informative and in depth.. tnx ryan.. N x

@DriveItRyan 2 жыл бұрын

🤣 Everyone enjoys a little tiny4k every now and then. It’s more data and my MacBook nearly craps itself trying to process it but sometimes it comes out pretty good!