PPF Pro Tips - When To Use Slip Solution + When To Use Tack Solution

Рет қаралды 17,642

Күн бұрын

In this video, Eric goes over when to use Slip Solution and when to use Tack Solution during a PPF Installation.
Slip Solution VS Tack Solution: • PPF Pro Tips - Slip So...
How To Mix PPF Solutions: • PPF Pro Tips - How To ...
If you have any questions about installing PPF on your vehicle or any questions, comments or concerns, feel free to email Eric at eric@driveprotected.shop
Follow Eric on Instagram: @eric_sawatzky
Follow us on Twitter: @Drive_Protected
Follow us on Instagram: @driveprotected.shop
Follow us on Facebook: @ Drive Protected Shop
Find your pre-cut patterns here: driveprotected...

Пікірлер: 42

@johnnyteunissen7707 6 ай бұрын

Great information! I was looking exactly for a video to help me understand the difference between tack and slip solution and when to use. I have a headlight that I got ppf installed and it has some tension area that are lifting because of the compound curves. I am going to try to repair and get the ppf to lay down myself and your video here will help big time. Thanks again!

@DriveProtected 6 ай бұрын

You're welcome! Glad you found value. Reach out if you need any help!

@MonsieurCrez 7 күн бұрын

Brilliant vid, super useful thanks!

@oxeduss8010 3 ай бұрын

The most perfect all tutorial video ever. Thank you.

@MD-1996 5 ай бұрын

Best tutorial on PPF and the two solutions. Thank you 🙏🏻

@dale3764 12 күн бұрын

Thanks! I needed that

@MrAchilles113 7 ай бұрын

phenomenal video, one of the best ive seen thus far

@DriveProtected 7 ай бұрын

Thank you for the kind words!

@Green-Mamba Жыл бұрын

Great video, and your doing fantastic job! Keep it up.

@DriveProtected Жыл бұрын

Thank you!!

@lanceme6007 Жыл бұрын

Very well explained. You made a hard job looks simple.

@alfredsantoro38 8 ай бұрын

thank you. Very informative. Learned quite a bit

@medic75 4 ай бұрын

I finally understand how to do most of it. I would love to see how to cut or fit the PPF to fit panels.

@DriveProtected 4 ай бұрын

Awesome! We have many videos on this channel on how to fit PPF to panels of a vehicle. Check them out!

@Thomas_Jefferson1 4 ай бұрын

Thank you so much for video! Very helpful

@rafaelastorga5215 Жыл бұрын

Great tutorial. Thanks

@truereality5873 3 ай бұрын

Thank you

@adams402 7 ай бұрын

Quality content. Thanks for this.

@DriveProtected 7 ай бұрын

Thanks for watching!

@alomlaskar4355 Жыл бұрын

Good & clean work 😊

@gravoshopslp3947 7 ай бұрын

Awesome! Thanks for the tips, cheers bro!

@DriveProtected 7 ай бұрын

Cheers!!

@anthonyboria5738 8 ай бұрын

Good stuff my man so if your using non precut sections where when would you start using tac solution..after you make your cuts..and then apply only to the corners if im correct?

@DriveProtected 8 ай бұрын

Thats correct!!

@glenngingrich1549 2 ай бұрын

Excellent. Thanks.

@krishnauppar380 Жыл бұрын

Best video.... From India

@LTapia337 Жыл бұрын

I love your videos man! How would you go about applying PPF over decals and pin stripes?

@DriveProtected Жыл бұрын

Thanks for the kind words! This all comes down to communication with the customer. Always educate them and let them know that if you put PPF over the top of the pin stripes (unless painted on the vehicle) there will always be an airline from the PPF having to have been installed over a raised surface. I always try my best to steer the customer towards getting the vinyl removed so we can install the PPF, then have the vinyl installed over top for a cleaner looking install. Bit of a lengthy response but it ultimately comes down making sure the customer is aware and educated on what the outcomes are regardless of installing over top of the vinyl or underneath.

@CertifiedTinter Жыл бұрын

Love it 👏🏼

@ondrejvlasaty7503 Жыл бұрын

Nice work

@ruleofones 4 ай бұрын

Super helpful tutorial! But, it does have to be said: you said..."super-doodie" 🤭

@DriveProtected 4 ай бұрын

😂 it is a Ford Super Duty truck!

@michaelalramo7261 Жыл бұрын

Thanks you so much!!

@rodstawaa Жыл бұрын

Nice. No need for the music, just amsr it 👍🏼

@BS-fs6kx Ай бұрын

Do you just tack on one side and use slip solution for the rest ?

@stuntcar Жыл бұрын

What about if you are doing a panel at home/DIY(not pre cut) of the role, would you still look to lock the edges and work your way in or start in the middle like vinyl. Thanks

@DriveProtected Жыл бұрын

Id get the hardest parts down first.