I didn't do a good enough job explaining the wiring in my build video. I hope this helps.
Пікірлер: 196
@JamesBrown-ey4mt Жыл бұрын
Great video and wiring photo. Thanks!
@jodyparker5810 Жыл бұрын
I really appreciate you sharing all of your knowledge with the washing community.
@allproexteriorservicesllc5338 Жыл бұрын
Thanks!!
@fabianolivarez7365 ай бұрын
Great video. How would you wire up a dual valve. Do you have a video for that
@allproexteriorservicesllc53385 ай бұрын
I do not have a video for a dual valve. I never needed one yet. Thanks
@ET-vy8gd Жыл бұрын
Thank you 😊
@MrJbrountas11 ай бұрын
Best simplest explanation on KZfaq!! Thank you
@MedinasProWashSolutions4 ай бұрын
Thanks for the video and for breaking it down for me. The remote and the ball valve works when I wire it to a drill battery. But when I hard wire it to the deep cycle battery that my softwash pump is tied into, the remote doesn’t work and the LED light and the ball valve doesn’t turn either. Any thought on this phenomenon????
@allproexteriorservicesllc53383 ай бұрын
Make sure your battery is charged. I believe the electric valve only above 9 volts.
@MedinasProWashSolutions3 ай бұрын
@@allproexteriorservicesllc5338 yessir it is, it’s the same battery that I use for my softwash pump and that fired right up yesterday. It’s weird
@Zodiac581 Жыл бұрын
You’re awesome man. There’s a lot of these channels that you can tell it’s all show for views and to sell you something. Not the case with you. I’ve learned a lot over the last two years from you and Pressure Washers Channel. 👍 keep up the good work
@powerfulimprovements3 жыл бұрын
Nicely done as alway! Hey Bruno
@Doinitmyway3 жыл бұрын
The Pic at the end was the icing on the cake.
@allproexteriorservicesllc53383 жыл бұрын
Thanks!!
@littlespressurewashing2 жыл бұрын
Great video buddy
@allproexteriorservicesllc53382 жыл бұрын
Thanks
@jasonchampion99323 жыл бұрын
Great presentation, explanation and dedication to your followers 👍✌️
@DumbCarGuy3 жыл бұрын
For those that don't know. That red and black wire that is in the white sheeting that runs off to the battery supply is marine grade wire.
@sacarolinaecoblastllc75813 жыл бұрын
awesome video very helpful just ordered all my parts to build one myself thank you keep up the good work
@allproexteriorservicesllc53383 жыл бұрын
Awesome! Let me know if I can help with anything!
@housewashjosh59102 жыл бұрын
Thanks for the info. Very easy to follow. I got mine put together a couple of days ago. Now I need to figure out where and how I'll mount it. Can't wait to test it out and see how much time it saves me.
@allproexteriorservicesllc53382 жыл бұрын
It is a game changer for sure. Just make sure you rinse & keep an extra electric valve for back up. Thanks
@mcmillerpw Жыл бұрын
Ever have an issue with the power button staying depressed? Mine would not stay depressed this morning to power my box.
@allproexteriorservicesllc5338 Жыл бұрын
I have not, but I have not used my remote box in over a year. Maybe relocate the button on the bottom if you build another one. Thanks
@Zoolife222 жыл бұрын
So it should be 1/4” hose from SH into the junction box through the electric ball valve then 1/4” hose out of the box to the DS injector correct?
@allproexteriorservicesllc53382 жыл бұрын
Correct. Thanks
@vr0519643 жыл бұрын
Thank you! Ready to my setup this week...
@allproexteriorservicesllc53383 жыл бұрын
Nice!!! Good luck & wash on!!
@vr0519643 жыл бұрын
Thank you again for the video. Finally finished it, also install "Led lights" www.amazon.com/dp/B07XT266VD/ref=twister_B08QMFLNZT?_encoding=UTF8&psc=1
@joshcagle60353 ай бұрын
Why isn’t my remote working ? What would make it stop working ? I can’t figure it out. Thanks
@allproexteriorservicesllc53383 ай бұрын
There are multiple things that can make it stop working. Voltage, bad valve, wiring, etc. I would start with testing the voltage. Thanks
@RodderTV15 күн бұрын
Can you tell me what type of connection your using to 12 volt battery.
@allproexteriorservicesllc533815 күн бұрын
I used ring terminals to connect to the battery. Thanks
@RodderTV15 күн бұрын
Good. I have all the components.. I need to get a small 12 volt battery. Any advice??? What wire size from battery to wireless unit??? Thank you
@allproexteriorservicesllc533815 күн бұрын
@@RodderTV Maybe a lawn mower battery & 14 or 16 gauge wire should.
@XteriorxpertsFL3 жыл бұрын
Thanks for the video I messaged you yesterday about wiring and you upload a video couldn't ask for more!
@allproexteriorservicesllc53383 жыл бұрын
Perfect timing, Thanks!
@mikemcminn68663 жыл бұрын
The last 30-seconds should be in first 30-seconds... Hands-on is great... Diagrams are a no-brainer... Thanks for including it !
@MSTR-DTH23 Жыл бұрын
What wires would I connect a light to if you don't mind me asking?
@allproexteriorservicesllc5338 Жыл бұрын
You would attached the wires from the light to the output on the transmitter. Thanks
@roberthouseworth51262 жыл бұрын
Hello is that ball valve a auto return?
@allproexteriorservicesllc53382 жыл бұрын
Yes sir. Thanks
@outdoordeerdogs92042 жыл бұрын
What type wire you using. Every 10guage I get it's to big
@allproexteriorservicesllc53382 жыл бұрын
I use a 14 gauge from the box to the battery. 10 gauge is a little big and not needed. Thanks
@BronxTimes2 жыл бұрын
I have mine set up like this but my auto ball valve is working backwards why is that when I power is on the valve close when it’s off it opens up. Do you know what it can be
@allproexteriorservicesllc53382 жыл бұрын
Maybe try to switch the wires around. Thanks
@jamesl.3030 Жыл бұрын
"thank you for this video,as well as the others u make"!💯💯
@allproexteriorservicesllc5338 Жыл бұрын
Glad I can help & thanks for watching!!
@blakenasser71663 ай бұрын
Won’t this setup restrict water flow when you’re not spraying chem because you have to always have the injector inline of your hose?
@allproexteriorservicesllc53383 ай бұрын
Yes, You could use a 3-way electric valve to pull H2O while in rinse mode. Thanks
@blakenasser71663 ай бұрын
@@allproexteriorservicesllc5338 where would you get something like that?
@jaysonrichey2059 Жыл бұрын
Any issues with the receivers? Mine started going bad at 5 months. Ordered another to build a back-up unit and it was bad. Replacement receiver was bad too. :(
@allproexteriorservicesllc5338 Жыл бұрын
No, I have not had any issues to date. Thanks
@BronxTimes2 жыл бұрын
I did the wires like you said and it don’t close just open and when I hit it off it don’t close why is that
@allproexteriorservicesllc53382 жыл бұрын
More than likely you did not buy the auto return valve. The auto return feature allows the valve to close when power is cut off to the valve. Hope this helps. Thanks
@BronxTimes2 жыл бұрын
Okay now other question for you lol I have the auto valve one and when I turn it on the ball valve close when I turn it off it opens up don’t it supposed to be the opposite
@erikservices3 жыл бұрын
I've learned from this video. Thanks for sharing
@allproexteriorservicesllc53383 жыл бұрын
Thanks for watching!
@edmilization2 жыл бұрын
I got the reverse polarity version was so excited when it worked then it wouldnt shut off lol I cant seem to find anymore auto return on amazon.
@allproexteriorservicesllc53382 жыл бұрын
You could with this valve & use 1/2" to 1/4" barb. ussolid.com/u-s-solid-motorized-ball-valve-1-2-stainless-steel-electrical-ball-valve-with-full-port-9-24-v-ac-dc-2-wire-auto-return-normally-open.html
@jamesmarcum8078 Жыл бұрын
Made the same damn mistake.
@kingwindowscleaningpowerwa54063 жыл бұрын
thank you good video
@allproexteriorservicesllc53383 жыл бұрын
Thanks for watching!
@TheOliverFamvlog2 жыл бұрын
Can you tell me why chemicals are still going through when the ball valve is off and my downstreamer has the one you turn on and off do you think that is the problem
@allproexteriorservicesllc53382 жыл бұрын
It sounds like the ball valve is not closing. I would start there. Thanks
@TheOliverFamvlog2 жыл бұрын
@@allproexteriorservicesllc5338 I have the same one as you in the video does it matter what way it goes
@allproexteriorservicesllc53382 жыл бұрын
@@TheOliverFamvlog No, because it is just and off/on ball valve. Does your valve have 2 wires?
@TheOliverFamvlog2 жыл бұрын
@@allproexteriorservicesllc5338 yes
@allproexteriorservicesllc53382 жыл бұрын
@@TheOliverFamvlog You can connect the ball valve straight the battery. When you disconnect it, it should close automatically.
@backyardgrillmaster291024 күн бұрын
I have one question in in excuse me if I don't know how much water can flow through their can I use a can I change out the quarter inch is that half inch Barb's on there just asking I don't know that's why I'm asking thank you for your time if you can if you answer this I know the videos 3 years old
@allproexteriorservicesllc533824 күн бұрын
You can use 1/2" to 1/4" barb fittings. Not sure if that is what you are wanting to do. Thanks
@backyardgrillmaster291024 күн бұрын
Yes thank you for your time. Love the videos
@backyardgrillmaster291020 күн бұрын
I bought a soapbox for $500 they came with a is for downstreaming injector for the 4 gallons in a power washer but if you just change out the half inch barbs I can use it I can use it for my software 12-volt and Save 750 then buying another one for my Software System I don't mind changing the barbs out from for the soft wash to the downstream for the power washer for the that just doesn't make any sense in my opinion I have two soap boxes that does the exact same thing thank you for your information
@geauxbro72 жыл бұрын
⭐⭐⭐⭐⭐
@kroperez67613 жыл бұрын
Excellent video ! you Rock !
@WASHLIFE7042 жыл бұрын
how much do u charge to build one
@allproexteriorservicesllc53382 жыл бұрын
I don't build them anymore because of time. Thanks
@jdoesitall49403 жыл бұрын
Exactly like the one I built I put switch on side and added a light
@southeastga.softwash40822 жыл бұрын
I got mine wired the same way .it's a 2wire valve just like that. Mine doesn't close . Why want it reverse polarity
@440pressurewashing8 ай бұрын
Do you build them to sell
@allproexteriorservicesllc53388 ай бұрын
Not any more due to time constraints. Thanks
@srdjannakalamic58563 жыл бұрын
Great video..game changer
@ChristyHolmes-bo2ksАй бұрын
Do you sell these?
@allproexteriorservicesllc5338Ай бұрын
Not any more due to time. Thanks
@scottgarvey14693 жыл бұрын
i hooked it up exactly like u showed. It will only open and not close
@allproexteriorservicesllc53383 жыл бұрын
Make sure you have the auto return valve. Thanks
@scottgarvey14693 жыл бұрын
@@allproexteriorservicesllc5338 yep your right. I have the wrong one. Thanks brother
@scottgarvey14693 жыл бұрын
the new one im ordering has a red and green wire. 1/4” will that work? cant find red and black on amazon
@allproexteriorservicesllc53383 жыл бұрын
@@scottgarvey1469 Here is where I get the valves from . ussolid.com/u-s-solid-motorized-ball-valve-1-4-stainless-steel-electrical-ball-valve-with-full-port-9-24-v-ac-dc-2-wire-auto-return.html
@iShineCincy2 жыл бұрын
How much is your box ?
@allproexteriorservicesllc53382 жыл бұрын
I am not building them anymore. Check out Kentucky Wash Pros. Thanks
@cleberligia3 жыл бұрын
Thank you for this excellent explanation video. I save it to install my box when I got one. Someone can put the link where can I buy this box? Thank you 🙏
@allproexteriorservicesllc53383 жыл бұрын
You can get them from Home Depot or Lowes. It is a 6"x 6"x 4" Electrical junction box. www.homedepot.com/p/Carlon-6-in-x-6-in-x-4-in-Gray-PVC-Junction-Box-E987RR/100404096
@cleberligia3 жыл бұрын
I’m sorry. Maybe I was not clear. I’m talking about the whole system ? Not just the box. My bad.
@allproexteriorservicesllc53383 жыл бұрын
@@cleberligia No worries. I build these boxes. You can message me here for more details. Thanks facebook.com/All-Pro-Pressure-Washing-Accessories-104510111369317
@josenoriega4573 жыл бұрын
Tremendo invento espero que pueda instalar
@vr0519643 жыл бұрын
Jose si puedes anadale también una Luz LED se ve tremendo. www.amazon.com/dp/B07XT266VD/ref=twister_B08QMFLNZT?_encoding=UTF8&psc=1
@lawrencerouser15133 жыл бұрын
I GOT MINE HOOKED UP. BUT I CANT GET IT TO CLOSE WITH MY REMOTE. WHAT COULD BE TGE PROBLEM?
@allproexteriorservicesllc53383 жыл бұрын
Do you have the auto return ball valve?
@havefaithpressurewashingse72723 жыл бұрын
Awesome!! I got a question? What Size is that wire running to the battery
@allproexteriorservicesllc53383 жыл бұрын
I run a 10 gauge wire. Thanks
@martinmontoya21633 жыл бұрын
Always putting out great content! How is your valve holding up?
@allproexteriorservicesllc53383 жыл бұрын
Thanks!!
@mikecostello92822 жыл бұрын
Thanks All Pro for the build, I just completed my box today. I know you connect your power to a marine battery but I opted for a cordless drill battery and an adapter but it seems to only turn the valve on but not off. If you have any knowledge on this it would be appreciated, thanks.
@mikecostello92822 жыл бұрын
just read previous comments and figured the problem out
@allproexteriorservicesllc53382 жыл бұрын
@@mikecostello9282 Awesome. Thanks!!
@alekseiwave48943 жыл бұрын
Awesome thank you
@matthewstanley893 Жыл бұрын
Anyway to get the wiring diagram?
@allproexteriorservicesllc5338 Жыл бұрын
It should be at the end of the video. Thanks
@matthewstanley893 Жыл бұрын
Thank you, sir.
@freepresssa92992 жыл бұрын
Hay buddy hope you are your family are doing good, my name is Joe I enjoyed this video it inspired me too make a remote system.... I'm having issues pairing the remote baycicly I'm not getting a green light. Any help would be greatly appreciated
@allproexteriorservicesllc53382 жыл бұрын
Thanks!! We just got power back. Hoping to have internet soon. I would start with changing the batteries in the remote. Mine came paired and worked out of the box. Thanks
@Truprosoftwash3 жыл бұрын
Thank you!!
@Truprosoftwash3 жыл бұрын
If you would add a strobe light. Any wiring tips or video recommendations? Thank you!
@davidweatherford65923 жыл бұрын
Thanks for all the info and parts list. I put mine together just like you showed but when I press on, I can hear valve open, when I press off, nothing happens. All I can hear is relay cutting off and in and green light on relay turns on and off. But ball valve want close back. Ever had this happen? Thank you
@davidweatherford65923 жыл бұрын
Never mind,,, I just figured out that I didn’t order the auto return valve.. crap... thanks though
@allproexteriorservicesllc53383 жыл бұрын
Do you have the auto return ball valve? If you do, then you can test it directly on the battery. If you connect the two wires from the valve to the battery it should open. When you remove the wires from the battery, it should close. Thanks
@davidweatherford65923 жыл бұрын
@@allproexteriorservicesllc5338 no, I just figured out I didn’t have the auto return valve. Ordered wrong one. Just ordered correct one off Amazon. Thanks for the reply and all the great videos.. Appreciate ya 👍
@allproexteriorservicesllc53383 жыл бұрын
@@davidweatherford6592 Anytime. Let me know if I can assist with the build. Thanks
@michaelhebert81973 жыл бұрын
Where did u pickup the power wire from the battery to the box?
@allproexteriorservicesllc53383 жыл бұрын
You can use a 14 or 16 gauge wire with a jacket. You can get it at a local hardware store or on Amazon. Thanks
@tntwashpro38633 жыл бұрын
What is you want to add external lights for a visual on off
@allproexteriorservicesllc53383 жыл бұрын
All you would do is connect the wires to the same terminals as the ball valve. Just make sure it is a 12 volt led light,. Thanks
@tntwashpro38633 жыл бұрын
@@allproexteriorservicesllc5338 thanks
@vr0519643 жыл бұрын
www.amazon.com/dp/B07XT266VD/ref=twister_B08QMFLNZT?_encoding=UTF8&psc=1 I put one on mine...
@carlloveless47172 жыл бұрын
If I want to wire a cordless drill battery to it instead of using my 12v should I still use an inline fuse?
@allproexteriorservicesllc53382 жыл бұрын
I would for extra safety. Thanks
@devonhammond29143 жыл бұрын
Hello, thanks for the video! I feel like I am close to getting my box done. Do u know why my switch is lighting up but the LED on the remote won't light up? I purchased another before I reached out to see if the switch was bad but no luck. Thanks in advance for your help my friend.
@allproexteriorservicesllc53383 жыл бұрын
Check the batteries in the remote. The light on the remote should turn on regardless of the switch being on/ off. Thanks
@davidspriggs99162 жыл бұрын
If you hook everything up and only hear a click when push the on button. Would you assume bad ball valve? And will the ones with more then 2 wires work? Everyone’s out of 2 wire
@allproexteriorservicesllc53382 жыл бұрын
I would assume bad valve or weak battery. The 5 wire valves may work if you can figure out the wiring. Another option would be to use this valve, but it is more money & will last a lot longer. www.sprayerdepot.com/products/banjo-1-2-12v-full-port-electric-ball-valve?adpos=&scid=scplpLEV050&sc_intid=LEV050&gclid=CjwKCAiAgbiQBhAHEiwAuQ6BkuuFpyxTE83buPzyBdT7zybFW_sN1vYNSq9PFofVV-07_-DXYel7GRoC51oQAvD_BwE
@wlcpowerwashing41272 жыл бұрын
Can you build me on just like that and I pay you for it ???
@Vulcan59113 жыл бұрын
I have a couple of questions. I'm just a little confused on how you have the downstream injector hooked up. Where does the hose hook up to the injector exactly. I have hose reels but I don't run Chem through them. Just use them for storing all my hoses. I saw the other video where you hooked the hose up to the hose reel. I just need a visual on how you run the injector hose completely. And also I see you have the wire sleeve that you ran the black & white wires through. I like that. Where did you get that. Thanks.
@allproexteriorservicesllc53383 жыл бұрын
I use a quick coupler on my DS injector and connect it swivel on the reel. The injector hose goes from my DS injector to the remote box then to the SH tank. The wire came with the jacket around it to protect it. Thanks
@Vulcan59113 жыл бұрын
@@allproexteriorservicesllc5338 ok cool. Thanks 👍
@fornoreason42913 жыл бұрын
What’s the model of the banjo valve you switched too
@allproexteriorservicesllc53383 жыл бұрын
I am using this one. You can use the 1/2" version as well. Thanks www.banjovalves.com/3-8in-pp-lev-series-electric-valve.aspx
@Diego-Delgado3 жыл бұрын
so when you put in the inline fuse...did you just solder in the fuse on the hot line or....
@allproexteriorservicesllc53383 жыл бұрын
Solder or crimp it in the positive line close to the battery. Thanks
@LeagueofBasics2 жыл бұрын
I love this cost friendly setup because i may actually be able to afford it, one question. Could this be used to replace the ball valvve on the downstream injector so flow wouldnt be lost? Doing it this way in the line still forces the rinse mode through the injector correct? Or am I misunderstanding?
@allproexteriorservicesllc53382 жыл бұрын
Your thought process is correct, but the US Solid valve is not rated for the high pressure from my understanding. If you can find a high pressure electric valve, then it will work. Thanks
@LeagueofBasics2 жыл бұрын
@@allproexteriorservicesllc5338 i see. I have 4gpm machine so im concerned the flow may be cut down too much doing it this way and running it through the injector. M ay have to experiment but thank you so much for the help!
@Diego-Delgado3 жыл бұрын
whats your lead time for the this, say i ordered one today how long before its shipped?
@allproexteriorservicesllc53383 жыл бұрын
Right now, about a week. But when jobs start stacking, I may be around 2 weeks. Thanks
@blane99062 жыл бұрын
What size of wire is connected to your battery? I set mine up the same and not getting any power. Thanks!
@allproexteriorservicesllc53382 жыл бұрын
I am using a 14 gauge wire. Make sure you put a fuse close to the battery. Thanks
@steviehobgood3003 Жыл бұрын
Are u still building these boxes
@allproexteriorservicesllc5338 Жыл бұрын
No, I have not had much time to build. Plus the parts are a little harder to find. Thanks
@devonhammond29142 жыл бұрын
I have ordered 3 remote switches so far. The first wouldn't even light up. The other 2 just keep blinking and won't pair to any remote. Do u have an idea what I'm doing wrong? Thank in advance
@allproexteriorservicesllc53382 жыл бұрын
I never got a bad remote. I would check to make sure you have a good battery & good batteries in the remote. I also never had to pair the remote. Thanks
@Vulcan59113 жыл бұрын
So in theory can you just take out the ball & spring completely in the downstream injector and leave it out since the new ball valve takes over for it?
@allproexteriorservicesllc53383 жыл бұрын
In theory yes. But you will need a check valve or you will blow the 1/4” hose off the barbs. Thanks
@lawrencerouser15132 жыл бұрын
My ball valve will open but will not reclose. Any idea why? Thank you
@allproexteriorservicesllc53382 жыл бұрын
It could be a number of reasons. Do you rinse really well? If new and don't close, maybe a bad valve? Make sure it is a auto close valve. Thanks
@christophercedeno85603 жыл бұрын
I have a switch with red, black, yellow, green and blue. How can I make it work? If I wore it the way you have it, it turns on but won’t turn off.
@allproexteriorservicesllc53383 жыл бұрын
Not sure about the colors on that harness. It looks like the blue wire to the place of the white wire which is not used.
@onspotpowerwashing2 жыл бұрын
Great work brother! Im late to the game and it looks like all the 1/4 ball valves are sold out. Ill have to wait till they are back in stock - I was curious if you are still using this same ball valve or did you find something that is a upgrade/ replacement? Merry Christmas from Texas!
@allproexteriorservicesllc53382 жыл бұрын
You could use the 1/2" valve & get 1/2" to 1/4" barbs. I stopped using the stainless valve & have been using this one. www.sprayerdepot.com/products/banjo-1-2-12v-full-port-electric-ball-valve
@allproexteriorservicesllc53382 жыл бұрын
Merry Christmas!!
@onspotpowerwashing2 жыл бұрын
@@allproexteriorservicesllc5338 Boom! That looks like the real deal! Thanks again - wash on brother!
@michaelharris96053 жыл бұрын
Where did get the wire that go to battery?
@allproexteriorservicesllc53383 жыл бұрын
Amazon. It is a 14/2 wire with a jacket. Thanks
@firetip1982 жыл бұрын
Peace Out Bruno!
@michaelbrittle51573 жыл бұрын
Sweet
@michaelhebert81973 жыл бұрын
Is that the same remote from the first video that u left the links for? If so I tried to order it but it showed delivery mid June. Do you know of another one that would work I maybe able to get sooner? Thanks
@allproexteriorservicesllc53383 жыл бұрын
Which part is delayed? Thanks
@allproexteriorservicesllc53383 жыл бұрын
You can use this one or anything similar as long as it is 12 volt. www.amazon.com/dstfuy-Wireless-Remote-Anti-Theft-Barriers/dp/B0899M5Z8D/ref=pd_di_sccai_7?pd_rd_w=EtZpb&pf_rd_p=c9443270-b914-4430-a90b-72e3e7e784e0&pf_rd_r=3E5YV2GHY3WRV3QNXBC1&pd_rd_r=9739dab5-b09d-4c17-99d3-d239d2f1893c&pd_rd_wg=GEkYS&pd_rd_i=B0899M5Z8D&psc=1
@michaelhebert81973 жыл бұрын
@@allproexteriorservicesllc5338 okay thanks.
@justingarret47762 жыл бұрын
The one thing nobody mentions is the wire they use. Where are you finding the 12v insulated wiring. I can't seem to find anything that resembles what you're using. Everything I've ordered has been too thick of a gauge to fit in a connector for remote switch. This is the last thing standing in between me and returning everything lol Seems like such a simple thing but I'm not having much luck. Looks like maybe a 20 or 22 gauge?
@allproexteriorservicesllc53382 жыл бұрын
I would recommend at least 16 gauge marine wire like this. www.amazon.com/American-Gauge-Copper-Wire/dp/B0799HTPH1/ref=sr_1_3?crid=PTUTSK3LHGSO&keywords=16%2F2+marine+wire&qid=1647867398&sprefix=16%2F2+marine+wire%2Caps%2C88&sr=8-3
@justingarret47762 жыл бұрын
Thank you so much!
@HouseWashingRick3 жыл бұрын
I got it hooked up but cant figure out how to pair remote I pushed button on controller 3 times like instruction say but not working
@allproexteriorservicesllc53383 жыл бұрын
I never had to pair my remote. It always worked out the box for me. What remote system did you order. Thanks
@HouseWashingRick3 жыл бұрын
@@allproexteriorservicesllc5338 I got it working last night. I unplug it let it sit for 10 minutes and it started working. Also do you have Cashapp or Venmo I would like to send you a few dollars for your help this week.
@allproexteriorservicesllc53383 жыл бұрын
@@HouseWashingRick No need!! Let me know if you need anything else. Wash On Brother!!
@HouseWashingRick3 жыл бұрын
@@allproexteriorservicesllc5338 thank you for your time I truly appreciate all your help
@harrisbros.servicesllc12932 жыл бұрын
This was a great video and I used it as a reference to wire mine, but it won't work. I even bypassed the power button, but nothing. Is there any common errors with this system?
@allproexteriorservicesllc53382 жыл бұрын
The biggest error is you may have the wrong valve. You need the auto return valve. Thanks
@harrisbros.servicesllc2072 жыл бұрын
@@allproexteriorservicesllc5338 I brought it inside last night and was jacking with it. I switched the input and output sides and it kicked on, but the button was staying on constantly while the remote receiver was active. I could turn it on and off with the remote, but when it was one, it was on. No matter if I had the button engaged or not. Do you have any idea why?
@harrisbros.servicesllc12932 жыл бұрын
@@harrisbros.servicesllc207 If you can give me any sort of idea I would appreciate it.
@allproexteriorservicesllc53382 жыл бұрын
@@harrisbros.servicesllc207 It sounds like you have the switch wired wrong. Check the connections again.
@harrisbros.servicesllc2072 жыл бұрын
I've checked several times and have looked at your video several times. I ordered all new stuff yesterday. Ive wired up trailers and such before, so I'm not a know-nothing.
@caseydavis69353 жыл бұрын
Is this the same system you’re still running now ?
@allproexteriorservicesllc53383 жыл бұрын
Yes sir. The only thing I did was added the upgraded Banjo micro electric valve. Just remember to flush it out on a regular basis. Thanks
@g.i.proexteriorcleaningllc74203 жыл бұрын
I grabbed the 5 wire valve the first time and was completely lost🤣 2 wire guys
@jdoesitall49403 жыл бұрын
Same
@HouseWashingRick3 жыл бұрын
Do you sell these. I have all the parts or could I send it to you to build for me ??? I don't trust myself with the wires.
@allproexteriorservicesllc53383 жыл бұрын
I do sell them. Not hard to build & I would be willing to assist. Thanks
@HouseWashingRick3 жыл бұрын
@@allproexteriorservicesllc5338 ok thank you very much. I will reach back out to you this evening
@CeetheDon15693 жыл бұрын
Do you sell these?
@allproexteriorservicesllc53383 жыл бұрын
I do sell them. Send me a message here. facebook.com/All-Pro-Pressure-Washing-Accessories-104510111369317