DTF Printer End Of Day Maintenance **WET CAPPING**

No video

DTF Printer End Of Day Maintenance WET CAPPING

Рет қаралды 14,526

Күн бұрын

Wet Capping your DTF Printer at the end of the day is very important to Maximize the life of your printer head.
This Process should be done when you a done printing for the day.
Also Wet Capping should be done when going away for the weekend.
Any longer then a couple of days and you may require someone to do a few prints and do wet capping process again.
BUT END OF DAY MAINTENANCE IS MOST IMPORTANT

Пікірлер: 15

@djgrandauto8541 5 ай бұрын

Now adding the metal between the sensor is genius. My vendor told me I had to place a wire and let the heads come back. It never worked for me so I just did syringe on top and syringe on bottom. I’ll try it TY.

@KORUPTable 10 ай бұрын

Nice entry level hobbyist printer

@ARMA2ARMENIA 6 ай бұрын

Very nice printer

@presstheshot9226 7 ай бұрын

Awesome video. What’s the name of the moisturizer or where can you get it. Thank you.

@sadiqueabubakararyee2279 4 ай бұрын

Hi. Thanks for a great video. If u don't have a moisturiser what do u do? or hair moisturiser okay?

@sergioaufieri2118 6 ай бұрын

Muchas gracias, muy importante el mantenimiento. Consulta, la crema humectante se diluye en agua en que proporcion? O solamente se coloca la crema normal ? Gracias. Saludos

@gregorygarciagehlen4153 7 ай бұрын

good evening, superb video well explained. Can you tell us which product you use as a wet capping humectant and if you know how to make us a video of cleaning the correct print head and possibly the cleaning to go on vacation for 3.4 week it would be nice. thank you very much and good luck for 2024

@inkfusiondtf 7 ай бұрын

Thanks. Yes Print Head is Epson i3200 and Wet Cap With DTF Torontos Moisturizer: www.dtftoronto.ca/product-page/multi-purpose-moisturizer-fluid If you are leaving for weeks i always recomend if DTF Printer Left For more then 2-3 Days Teach someone how to run a print or two then clean and wet cap. So every 3-4 days the printer you should run a small print then Clean & Wet Cap. Hope it helps. God Bless

@alibabalazzo4891 4 ай бұрын

what kind of Moisturizing Liquid do you use?

@draglorde 6 ай бұрын

Do you also need to do this for a UV LED printer? Where do you buy your moisturizer? Thanks for the good tips/video! :)

@antoniolamarca6094 7 ай бұрын

@DTF Doctor great video! What type of inks do you use and what printheads does your printer have? I would like to do the same on my printers but I don't want to cause any damage. I have printers with UV inks and Epson XP600 print heads. Thanks!

@inkfusiondtf 7 ай бұрын

Print Head is i3200 And Ink is Supreme Ink from DTF Toronto. We have both in stock. We also carry Powders & Film. Link for Ink Bundle: www.dtftoronto.ca/product-page/supreme-bubdles