Dual mag carrier in the HD jig

Рет қаралды 14,690

3 жыл бұрын

Dual mag carrier in the HD Industrial Design jig. The perfect curve everything.
Music: Gravity Bass
Musician: Nordgroove
URL: icons8.com/music

Пікірлер: 80

@krieger41861 3 жыл бұрын

Thank you, I have learned a lot of new techniques. You’re about the only one that goes from start to finish. Keep it up

@FalTacUnlimitedLLC 3 жыл бұрын

Thank you so much

@larryjones6359 2 жыл бұрын

Great job learning TONS thanks just started two months ago at age 82, it turned 83 yesterday LMJ

@FalTacUnlimitedLLC 2 жыл бұрын

Happy birthday sir!

@TAUREANCOOKE 2 жыл бұрын

really clean, man!

@danw7156 3 жыл бұрын

I love that design...I’m going to make matching holster and mag pouch now. Thanks.

@FalTacUnlimitedLLC 3 жыл бұрын

Enjoy!

@rickpinto 3 жыл бұрын

TKS, your job is amazing, congratulations.

@FalTacUnlimitedLLC 3 жыл бұрын

Thanks man

@MrNewtoGuitar 2 жыл бұрын

Love your attention to detail and start to finish builds. You’ve totally inspired me to try my own holsters! I’ll definitely be buying one of yours out of total support to your business though. I’ve paid double what your custom holsters cost! Love your channel and content! Hope you succeed In growing your business! I’ve told all my friends about you!

@FalTacUnlimitedLLC 2 жыл бұрын

I appreciate your support! Don't forget to send some pics of what you create

@samaniegohummer1 2 жыл бұрын

Thank you 🔥

@bricefsvens5031 3 жыл бұрын

Man, thank you so much for all your videos. I6m just getting started but you have saved me so much time and headache. Thanks again.

@FalTacUnlimitedLLC 3 жыл бұрын

Np! Thanks for the support

@phoenixholsters Жыл бұрын

Great work and a great video!

@chopperjohnparamedic2219 3 жыл бұрын

I would love an EDC tray.

@FalTacUnlimitedLLC 3 жыл бұрын

Available on the site. Faltacunlimitedllc.com

@Think_4_yourself_plz 3 жыл бұрын

I'd love to see an M&P Shield with a TLR-6 light and suppressor sights, with mag holster attached as an IWB appendix carry holster. Two color if possible. I'm looking into to making these, and your videos have shown me a lot. Thanks for tutorials. 👍🇺🇸👍

@countersniper432 3 жыл бұрын

Just had my wife order me a holster for Christmas lol. Can't wait, although I'm sure with lead times it might not be here by then but that's cool with me.

@FalTacUnlimitedLLC 3 жыл бұрын

Whats the name on the order

@countersniper432 3 жыл бұрын

@@FalTacUnlimitedLLC Barton - just submitted this morning

@olechuga2 Жыл бұрын

How much to have a curved three-magazine (7-rd mags) pouch-carrier, to be worn on the right (R) side of my belt, for a Performance Center Smith and Wesson 4" Shield EZ (9mm). Do you carry Vietnam tiger-eyed green kydex? I am also going to order an OWB left handed Level 3 holster in the same color. Oscar

@ronaldpeterson5598 2 жыл бұрын

How about a Pocket carrier for one, Ruger LC9mm magazine, black, minimalist design, secure pocket clip- so when you grab your mag the carrier stays put. Newbie here, retired and CCW, beginner.

@FalTacUnlimitedLLC 2 жыл бұрын

I'd probably rock an ulticlip on a mag carrier. Be a good combo for that

@ronroth6022 3 жыл бұрын

Seriously inspiring. I’d love to see a iwb light bearing taco or sidecar. Glock tlr1/7a or a Sig 365 tlr-6. I remember the one that was titled a iwb light bearing ended up being a owb 🤙🏽

@FalTacUnlimitedLLC 3 жыл бұрын

Definitely will do that when I can!

@ronroth6022 3 жыл бұрын

Outstanding. Keep the content comin bruh

@brianbrinegar6086 3 жыл бұрын

Excellent work! Can you make a video for a competition holster with an optics cut out? Cheers!

@FalTacUnlimitedLLC 3 жыл бұрын

Absolutely. The next one i do I'll film! Also see you soon!

@brianbrinegar6086 3 жыл бұрын

@@FalTacUnlimitedLLC Let me look in the safe - I'll pick one out to order!

@Balsero-qb9gv 2 жыл бұрын

8 have a question please, what's the name of that foam? Any place that I can buy it or order it? Thanks so much!!!

@FalTacUnlimitedLLC 2 жыл бұрын

www.holstersmith.com/vcom/thermoform-molding-foam-for-kydex-holster-making-mega-form-12x115x1-p-4292.html

@gersoncarlota9843 3 жыл бұрын

I have not seen how you melted the kaydes I can use an electric oven , and for how long , and these parts where I find( sou do Brasil)

@FalTacUnlimitedLLC 3 жыл бұрын

I use ovens or t shirt press

@anesproductions6408 3 жыл бұрын

As always, your videos are badass and educational for someone like ne who id just starting out. If you don't mind my asking, what material do you use for your retention spacers?

@MarktheAirsoftPrimate 3 жыл бұрын

Is it bad that I put a tiny bit of superglue on my blocking because I’m paranoid?

@FalTacUnlimitedLLC 3 жыл бұрын

If it works. Rock it

@sharp_ghisa6044 2 жыл бұрын

What kind of foam? EVA? Thanks! Nice work!

@FalTacUnlimitedLLC 2 жыл бұрын

www.holstersmith.com/vcom/thermoform-molding-foam-for-kydex-holster-making-mega-form-12x115x1-p-4292.html

@mrbreihan 3 жыл бұрын

Great work! Can you show how you block out a 1911 for an OWB holster. Just curious how the blocking looks with all the controls.. Thanks!

@FalTacUnlimitedLLC 3 жыл бұрын

Pretty simple. The right side needs a channel to the take down pin. The left side doesn't need anything passed the safety. The slide catch is so low from the factory that the grip creates the channel. Personally I cut wood or scrap metal (if the mold isn't already blocked for it) to go over the safety. Or you cut the swestshield just before the safety and don't have to worry about blocking that side at all

@mrbreihan 3 жыл бұрын

@@FalTacUnlimitedLLC Awesome. Thanks. What thickness of kydex to you mainly use for your holsters?

@FalTacUnlimitedLLC 3 жыл бұрын

@@mrbreihan .08

@geabyerlehnert1621 Жыл бұрын

Hey there u enjoyed watching the video how much would you charge to make a double mag holster for a s&w shield?

@stephenreed5522 3 жыл бұрын

I had a question with your video , Before starting your video, not only your logo the movement and music, how is that done ?? I ask Mr, Just Truck'in but haven't gotten a response, Us it something i can put together on my laptop ?? Appreciate any help, Sir

@FalTacUnlimitedLLC 3 жыл бұрын

Believe it or not I use an app on my smart phone called video maker. Which can be made with a laptop as well

@stephenreed5522 3 жыл бұрын

@@FalTacUnlimitedLLC .. Thank you 😊 Sir.

@MrMgpixels21 3 жыл бұрын

What’s the secret to drilling a straight hole for retention sometimes my drill runs or not straight on the back side

@FalTacUnlimitedLLC 3 жыл бұрын

Drilling plates and experience lol. Try drilling slower

@dustincopeland612 3 жыл бұрын

Where do I go to order a holster and a double mag holster to go with a colt all American model 2000?

@lof1320 3 жыл бұрын

🇧🇷👏👏

@nswfftp 3 жыл бұрын

Next build iwb glock 48 with trl6. With clear kydex

@FalTacUnlimitedLLC 3 жыл бұрын

clear is very brittle but i have a couple clear builds coming up

@josephholster9626 3 жыл бұрын

A que temperatura calientas el Kydex en el horno

@FalTacUnlimitedLLC 3 жыл бұрын

360⁰

@LeeBoone001 2 жыл бұрын

What tool did you use that contoured to the mags to give you your straightedge at the top? Not sure I described that very well.

@FalTacUnlimitedLLC 2 жыл бұрын

It's a contour gauge

@lowdragtactical4742 2 жыл бұрын

Any suggestions on what brand or where to get one.

@FalTacUnlimitedLLC 2 жыл бұрын

@@lowdragtactical4742 home depot!

@angellledo665 2 жыл бұрын

What material is your foam?

@FalTacUnlimitedLLC 2 жыл бұрын

www.holstersmith.com/vcom/thermoform-molding-foam-for-kydex-holster-making-mega-form-12x115x1-p-4292.html

@davissantiago5177 3 жыл бұрын

I agree with Jeff Williams, keep up the great job, what do you suggest if you don't have curved jig? I appreciate your feedback?

@FalTacUnlimitedLLC 3 жыл бұрын

I used to curved them by hand. Really not hard at all. Just do the retention holes last

@davissantiago5177 3 жыл бұрын

@@FalTacUnlimitedLLC thank you, was thinking about that, thanks for the feedback and "keep bending"or happy bending as you always say

@FalTacUnlimitedLLC 3 жыл бұрын

@@davissantiago5177 thanks man! Tons more content coming out. I'm swamped lmfao

@davissantiago5177 3 жыл бұрын

@@FalTacUnlimitedLLC until your next video be safe

@FalTacUnlimitedLLC 3 жыл бұрын

@@davissantiago5177 tonight! Hahha and you as well

@mattknower8073 Жыл бұрын

Sorry, Remoil?

@FalTacUnlimitedLLC Жыл бұрын

Yup. It's a lubricant. So it not only cleans. But it doesn't allow the sheets to stick together

@mattknower8073 Жыл бұрын

Recoil?

@matthewweaver7073 10 ай бұрын

What thickness kydex do you use

@FalTacUnlimitedLLC 10 ай бұрын

.08

@xdivineHART 2 жыл бұрын

What kind of foam are those?

@FalTacUnlimitedLLC 2 жыл бұрын

Beige from from holstersmith.

@garrickdelafuente9082 Жыл бұрын

Bor u cool

@juanclark9824 3 жыл бұрын

Are you excepting laser work. I rather have someone else do it. The cnc machines are an arm and a leg

@FalTacUnlimitedLLC 3 жыл бұрын

Ya I accept laser work anytime. What do you need done? Fomis?

@juanclark9824 3 жыл бұрын

@@FalTacUnlimitedLLC logo for holsters

@FalTacUnlimitedLLC 3 жыл бұрын

@@juanclark9824 ya man anytime.