Рет қаралды 14,000,944
This is a guide for installing Ducabike clear clutch cover which requires hydraulic clutch conversion. The guide is for all necessary steps but I expect you to look at included service manual and Ducabike instructions for torque values etc. This will only help you understand how too look at the manual. It is a great resource.
Please note that Ducabike recommends this be installed by professional mechanics.
NOTE: I made a mistake in text at 8:20 where I stated that you don't need to use 8mm ball in pressure plate. YOU DO! I've made annotation correction but in case you don't have annotations turned on, FYI.
DUCABIKE PARTS:
CCDV02 - CLEAR CLUTCH COVER OIL BATH - ducabike.com/d...
AFI01 - KIT HYDRAULIC CLUTCH M821 - ducabike.com/d...
CP03 - SPROCKET COVER - ducabike.com/d...
AF02 - CLUTCH SLAVE CYLINDER CARBON - ducabike.com/d...
CCDV04SM - PRESSURE PLATE - ducabike.com/d...
CCDV03SM - PRESSURE PLATE - ducabike.com/d...
TOOLS:
5mm allen
4mm allen
2.5mm allen
Torx T25
Phillips head screw driver
14mm wrench
13mm wrench
10mm socket
Pliers
Small snips/cutters
SUPPLIES:
Ducatibond (ThreeBond 1215)
Parts cleaner
Engine oil
DOT4 brake fluid
MityVac (optional but helpful)
Shop gloves
Service Manual - www.pdf-archive...
Ducabike Instructions - www.pdf-archive...
VIDEO GEAR:
Camera: Canon 5D MKII [1080p/24p]
Lenses: Canon 24-105mm f/4 L, Sigma 28mm f/2.8 Fisheye
MUSIC:
Artist - MindsEye - freemusicarchiv...
Song - Stellar - freemusicarchiv...
Obtained from Free Music Archive - freemusicarchiv...
Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
creativecommons...