Ducati Monster Cafe Racer Part 1 - Bike Strip down and design sketch

No video

Ducati Monster Cafe Racer Part 1 - Bike Strip down and design sketch

Рет қаралды 65,277

4 жыл бұрын

#Ducatimonster #caferacer #ducaticaferacer
The first episode in the Ducati Monster Cafe Racer build and we're stripping down the seat and the tank for a closer look at the frame and plan out a quick sketch on how it's going to look.
MERCHANDISE NOW AVAILABLE
www.fortheboldindustries.com/...
Instagram:
Instagram: / for_the_bold_industries
For all your parts, trust the experts at Dime City Cycles.
www.dimecitycycles.com
► Dime City Cycles:
kzfaq.info...
• Instagram → bit.ly/dimecitycycles-ig
• Facebook → bit.ly/dimecitycycles-fb
• Twitter → bit.ly/dimecitycycles-twitter

Пікірлер: 117

@TheAdamMacD 4 жыл бұрын

Happy to see you back at work. You seem to have gained a lot of confidence in your process (as you should). Very cool to see you progress as a builder. I’ll be following this!

@mole3481 4 жыл бұрын

I like the fact you can see the lines pretty quickly. It's so bloody important. I tweaked my z650 cafe after countless walk arounds with beer and photoshop mess abouts. You see so many horrendous half built (sometimes full builds) efforts on eBay with such terrible aesthetics. It's fundamental that everything works together. Cafe racers are the sexiest looking machines if done correctly. I got my headlight height wrong before and meant removing the forks and everything and cutting and spraying new shims to go over the upper fork legs (the shims make the fork look better) It was a couple of days work that I'd already done , just to drop the headlamp 30 mm. haha. Can really relate to your channel and that Jish's channel. Good honest builds but helpful and informative at the same time. :-)

@forthebold 4 жыл бұрын

Excellent. It’s a shame to see so many abandoned projects. I think a lot of people go in blind to how much money is pumped into them. Hope you’re build is going well

@motorcyclegarage2307 4 жыл бұрын

Sounds like a good plan - really look forward to your build here.

@forthebold 4 жыл бұрын

Glad to have you following.

@maxleopoldmun 4 жыл бұрын

thank you for sharing this story! I'm super stoked to watch these :)

@forthebold 4 жыл бұрын

Glad to have you with us watching the videos. 👍🏻

@lucaswonder1759 4 жыл бұрын

Excited for this!

@forthebold 4 жыл бұрын

Excellent

@wemel007 4 жыл бұрын

Great to see a new build! :D I'm looking forward to watch along! Grts from across the pond!

@forthebold 4 жыл бұрын

Thanks. Glad to have you on the journey.

@ivanpisco8758 4 жыл бұрын

Beautiful new acronym 👌🏻

@ronfuller9503 4 жыл бұрын

Greetings from Florida Looks like a good start, looking forward to following along with this build

@forthebold 4 жыл бұрын

Excellent. I’m sure Florida is still as hot as last month.

@ShivamSingh-qu3eq 4 жыл бұрын

Your videos are just great and sooo informative, I have been following you since a long time and currently customising and converting my 125cc to a cafe racer will send you some pics and videos when it's done(in2months) Love from India.💕😘

@forthebold 4 жыл бұрын

Thanks for watching. Best of luck with your build.

@almershingjini6581 4 жыл бұрын

Looking forward to the next steps! Keep up the good work mate.

@forthebold 4 жыл бұрын

Amazing. Will do

@oddis188 4 жыл бұрын

Nice to see a new build.

@forthebold 4 жыл бұрын

Amazing.

@felixkroeber4024 4 жыл бұрын

I love your builds

@forthebold 4 жыл бұрын

Thank you. Glad you do.

@cooperryan7441 4 жыл бұрын

Finally some inspiration to convert my Ducati monster to a cafe racer!! Already stripped the bike down last weekend and then this video is uploaded, perfect timing. Difficult bike to convert though you have my sub!!

@forthebold 4 жыл бұрын

Excellent. Glad to have you on the journey. Enjoy your build.

@sonicnyoom7283 4 жыл бұрын

Been with you since the beginning of the GS videos! Keep up the hustle!

@forthebold 4 жыл бұрын

Excellent. Thanks for sticking for the ride.

@Andy-mo5ql 4 жыл бұрын

I love this videos 😍🤤

@forthebold 4 жыл бұрын

Glad you do.

@zakihaiderali7461 4 жыл бұрын

I love it ❤😘

@forthebold 4 жыл бұрын

Amazing.

@Log-On-Line 4 жыл бұрын

ducati's make great cafe racers i love the sport classic 1000 its so good looking

@forthebold 4 жыл бұрын

They are nice bikes. I did originally think of pinching a few sport classic wheels.

@Log-On-Line 4 жыл бұрын

@@forthebold i think it would look awesome i love the wheels on the bike but then again i do love everything on that bike

@baykowsky 4 жыл бұрын

Waiting for the project to go on!

@forthebold 4 жыл бұрын

Probably no video next week on this as it needs a lot of editing but there will be the week after.

@it_is_what_it_is_brotha 4 жыл бұрын

Glad to see you back in your garage! Interested in seeing how this diy fuel tank plays out... Good luck

@forthebold 4 жыл бұрын

It’s experimental for sure with carbon fibre and Kevlar.

@it_is_what_it_is_brotha 4 жыл бұрын

@@forthebold if it works, it'll open a whole new world of possibilities for home builders.

@forthebold 4 жыл бұрын

Anthony Ferrara no reason it shouldn’t with the correct materials and chemicals. Fibreglass and carbon fibre tanks already exist. Luckily I have the help of a few knowledgable people

@shaggypulpo6562 4 жыл бұрын

You've got the touch

@forthebold 4 жыл бұрын

Hopefully.

@builtbythehand3902 4 жыл бұрын

Going to be ace!

@forthebold 4 жыл бұрын

Hopefully. I see yours is coming along well

@builtbythehand3902 4 жыл бұрын

@@forthebold almost there mate, just a small list of things to do, a couple of weeks if I pull my finger out!

@aeror115 4 жыл бұрын

Cool project buddy

@forthebold 4 жыл бұрын

Thanks.

@sundayduffer 4 жыл бұрын

i love the BIG tank on this bike... dont really see much cafe racers with BIG gas tank... im excited to see how this will turned out.

@forthebold 4 жыл бұрын

Hopefully you’ll like it.

@ANDY5 4 жыл бұрын

Yes!!!! Consider routing the exhaust under the tail aka 916, maybe a 2 into 1 version?

@forthebold 4 жыл бұрын

Nice idea. Would be nice going out the centre.

@nickgandy3 4 жыл бұрын

Definitely!!

@oddis188 4 жыл бұрын

Hopefully you'll get some good looking spoked wheels. The wheels doesn't match at all

@forthebold 4 жыл бұрын

I have a hub conversion ready. It’s on my Instagram.

@justinity 4 жыл бұрын

Yay

@forthebold 4 жыл бұрын

Yay

@andreac888 4 жыл бұрын

You can consider tha QD exhaust, it's small and it fits just perfect

@forthebold 4 жыл бұрын

Nice

@Chris-kh2fm 4 жыл бұрын

Will you have a rear wheel number plate or will it fit under the rear cowl. I didn't like them at first but warming to them now as it tidies up the rear end. But if you go for an illegal plate it will fit.

@forthebold 4 жыл бұрын

At the moment I’m leaving that as an afterthought and just getting it show ready so no plate for now.

@febcaleb 4 жыл бұрын

What software do you use to get your rough sketch? Starting a cafe racer build and that looks amazing to use.

@forthebold 4 жыл бұрын

It’s just adobe draw on the iPad Pro

@NormanGnome11 3 жыл бұрын

What did you do with the bits you took off the bike ?? - am putting a 'modified' M695 I purchased back on the road after it has been stood for 4 years .... Thanks.

@forthebold 3 жыл бұрын

Not much really come off that I'm not using again (that hasn't been thrown as they're too worn). The tank and seat I'm keeping to put back on at a later date if I need to.

@paycee17 4 жыл бұрын

Super exciting build mate ! I get how you want to model the foam core for your tank and seat section. Seems pretty straightforward : lay it on top and sculpt away. How do you plan on doing for the fairings though ? Did you come up with a way to hold them in place ? I'm really curious about that.

@forthebold 4 жыл бұрын

Straps and wire. Just anything to clamp / hug it to the frame.

@keirmccarthy8825 4 жыл бұрын

What program are you using on the iPad for that? Thank you

@forthebold 4 жыл бұрын

It’s adobe draw

@jishh 4 жыл бұрын

Its going to look hench

@forthebold 4 жыл бұрын

Hopefully 👍🏻

@spensermelchor2706 4 жыл бұрын

What year is tha duc? Im super excited for this build!!

@forthebold 4 жыл бұрын

It’s 1995

@mrindsborg 4 жыл бұрын

Which sketching program are you using there mate?

@forthebold 4 жыл бұрын

Just adobe draw

@manishkumar-ts2zz 4 жыл бұрын

👌👍

@forthebold 4 жыл бұрын

👍🏻

@rodolfomienert8292 4 жыл бұрын

just found you, and subscribed!!....I always loved the trellis frame from the Monster, (I own a 2006), AND the Honda 750 engines from my youth (I own a 1978), SOOO,... what you think about a marriage of the two???

@forthebold 4 жыл бұрын

Thanks for subscribing. I always like the trellis frame. In fact I’ll be doing a little trellis frame on a VFR750 engine on a cb650 frame soon.

@ommane331 4 жыл бұрын

You can build modified Honda ct 100 please reply.

@forthebold 4 жыл бұрын

I’m sure you could.

@ommane331 4 жыл бұрын

Thanks for reply

@Frisky_FZR 4 жыл бұрын

Is a GN125 a good base for a cafe racer??

@allcartuner 4 жыл бұрын

would be much better for a scrambler imo, but yeah you can definitely build a small cafe racer out of it!

@forthebold 4 жыл бұрын

Check out Jish’s 125

@FunWithAJ 4 жыл бұрын

Repaint the trellis frame for sure and also new front forks.

@forthebold 4 жыл бұрын

Out of interest why new forks?

@FunWithAJ 4 жыл бұрын

@@forthebold I have a 696 and the forks are non adjustable and generally very squishy which isn't great for riding. That's why I'd opt to change them. Which I am eventually. Drop some sr2 or Andreani forks in there and youd be set.

@forthebold 4 жыл бұрын

For the short term have you tried playing with the oil weight? I find that helps to adjust without going to expense.

@FunWithAJ 4 жыл бұрын

@@forthebold have not. May try.

@elijahmbewe7059 4 жыл бұрын

From zambia here

@forthebold 4 жыл бұрын

Hi Zambia

@elijahmbewe7059 4 жыл бұрын

For The Bold what can i do to have such a bike

@winstonaw91 2 жыл бұрын

what university youre saying?

@forthebold 2 жыл бұрын

Bangor University

@markschaffer7234 4 жыл бұрын

What is the name of that program at the end? Is it really photoshop ?

@larseN38 4 жыл бұрын

I am interested into that too. Keep up your good work. Greetings from Germany. :)

@markschaffer7234 4 жыл бұрын

Er hat noch ein Tutorial in einem anderen Video, er ist Designer und benutzt tatsächlich Photoshop :) Such mal bei älteren Videos👍🏼

@forthebold 4 жыл бұрын

It’s adobe draw on the ipad

@larseN38 4 жыл бұрын

@@markschaffer7234 Alles klar. Danke für deine Antwort.

@larseN38 4 жыл бұрын

@@forthebold Thank you for your quick response. ^^

@mikeeger7581 4 жыл бұрын

All of your bikes have that sa

@forthebold 4 жыл бұрын

Think this sentence finishes too early?

@mikeeger7581 4 жыл бұрын

Yes it’s not finished because any other time I made any comment on anything about your builds ,,, either I did hit a nerve or whatever but at least twice you got butt hurt and gave a sarcastic answer!!!!!!! As a creator you are supposed to have thicker skin,, in my opinion,, than you do !!!! So I did not want to finish what I was going to say,, and from now on I’ll just watch the videos and not comment at all,,, and even though you bust your ass on your builds it doesn’t mean then are great or good or appeal to everyone or can use some help!!????????👍❤️👌😍🙏Like I said ill just watch and that’s it from now on.

@forthebold 4 жыл бұрын

mike eger enjoy the build.

@billrandell4641 4 жыл бұрын

Brother..if you wack the Air Box that much..you might as well do "pods" , as you WILL be rejetting that engine...personally I'd go with "stacks"..a lithium Batt. and really lower the "profile".. but opinions are like butt holes, so GOOD LUCK!!

@forthebold 4 жыл бұрын

Already rejetted on the dynajet for it. Check out the maintenance video last year. It’s mentioned there.

@boldzic4016 4 жыл бұрын

Odawaj kanał

@whatsgoingon27 4 жыл бұрын

Please no ktm frame!

@forthebold 4 жыл бұрын

Will be 109%

@rosannaludeno2202 4 жыл бұрын

120 not 90

@forthebold 4 жыл бұрын

120?

@neophobiagarage1845 4 жыл бұрын

its gonna be great. a stock monster is a kind of ugly bike with a nice engine and sound, so it can only get better if you restyle it, chop it and remove the plastic .....just my opinion 🤓

@forthebold 4 жыл бұрын

I’m half way through liking it and not liking it. But whatever I do can always be reversed.