What a joy it is to watch a true craftsman. I am envious of your skill, talent and patience. Especially nice to see some of the younger generation (yes, I'm an old poot) carry on the level of skill and professionalism you possess. Truly a great video and one of the best I've seen on youtube. Thank you for sharing.
@confirm10222 жыл бұрын
Working full time and side busting in your shop is bad ass! Great work man!
@davidchappelle6480 Жыл бұрын
You do really Good work !! I'm a retired navy Hull Tech( Welder, fitter anythang welded, Glued or nailed a hull tech does it !) an now work at a shipyard in Mississippi. But i grew up just south of Belleview Fl. Some people Don't realize just how much work it is JUST to do all that welding ! Keep up the good work !
@j.c.smithprojects4 жыл бұрын
always enjoy watching you work. pride is craftsmanship is rare these days i like how far back the axles are set. perfect when towing with a dually. more capacity. dont forget the 3 id light in the rear center. trailer is wide enough to have them. the 3/4" led light work very well for that. may have to put the license plate off to one side. very nice job young man.
@ianwallett74384 жыл бұрын
You have put some hard work into building that trailer and done a fantastic job. Well done. You should be proud of that build.! 👍
@j_moffitt4 жыл бұрын
Thanks
@sheilamclaughlin963 Жыл бұрын
To spread gravel u need to chain it at a width for depth control
@brianherron54004 жыл бұрын
Looking good 👍, my opinion is that the axles should have been moved forward about 18" ,nice job 👌
@brianvassar25563 жыл бұрын
Makes it easier to back up and tow Yes there is more tongue weight but the truck that it is being towed behind won’t have an issue
@cjm3508 Жыл бұрын
Side marker lights. Looks really good!!
@davidgarrett86404 жыл бұрын
I would say you had the trailer loaded about right for weight. It did a vary nice job when dumping. Most trailers drag the load out way to far because of how low they are. Vary nice build. I am a welder fabricator as well so now I want to build my own.
@sheilamclaughlin963 Жыл бұрын
Looks good
@toddroot1757 Жыл бұрын
I am building a second dump trailer.first one looks like a regular box trailer but used a winch and an armed as the lifting device.. the one I'm building now is smaller for my recycling business and will use a travel trailer landing gear to lift. I have a factory dump trailer as well.
@Jacob-zd4gj4 жыл бұрын
Nice job. I have had many and all brands of trailers like that. That one is probably better built then all of them. Nice job. I did notice that on your tailgate the dirt sat on top of the lower two by two. Maybe put some flat stock at a 45 do dirt won't sit up there all the time.
@kenk50513 жыл бұрын
Sound of the welding arc is fine👍👍😉 No music is preferred😊
@safisher834 жыл бұрын
I love watching your videos, I feel the same way most days trying to keep track of what's going on and shooting from the hip all at the same time. Glad to see your back at it again!
@greendodge984 жыл бұрын
I like the axle placement because other dump trailers have to much tail stick out.
@richardmorrison49074 жыл бұрын
Exactly my thoughts. That trailer dumped in a very nice tight pile for a trailer
@Jamieclarke884 жыл бұрын
Awesome job on the build so far mate 👍👍👍
@j_moffitt4 жыл бұрын
Appreciate it
@fishpony12114 жыл бұрын
Awesome work dude. U should weld some racks on the sides for brooms and shovels. That trailer same out bad ass!!
@donpetrey80074 жыл бұрын
Maybe a way to latch the gate to tip up and spread a layer as your driving
@shanewright69584 жыл бұрын
Great job and video.. it's really looking good 👍👍🇨🇱
@JJohnsontrucking4 жыл бұрын
Awesome build I’d love to have one like that made for my company
@keithparady25944 жыл бұрын
Definitely a beefy trailer way better quality than a lot of other trailer out there
@richardmartinez194 Жыл бұрын
Beautiful job
@joshuajones73844 жыл бұрын
That's a solid dump trailer
@thomasballew78764 жыл бұрын
Looks and operate a great keep up the good work
@1mariomarm3 жыл бұрын
This a monster to move dirt tnks for share
@user-ld3qb1pp5n3 ай бұрын
Огонь 🔥🔥🔥
@michaelagnew78253 жыл бұрын
that is one beautiful trailer
@danieliusstrikaitis44014 жыл бұрын
Great project
@BAKERHUSKIE4 жыл бұрын
Nice work
@rogeliovega48392 жыл бұрын
Error coloco las ruedas muy atras mas sentradas quedaria mejor
@joshskelton21014 жыл бұрын
Maybe a chain and latch for tailgate. if you want to tailgate spread.
@CPSteveMiller4 жыл бұрын
Talk about overkill. That's a beefy unit! What's the cost on the build or what you'd be charging for this? Curious on the price difference over the standard mass produced ones. Yours is also a lot higher of a quality than the poor quality control manufacturer's have.
@j_moffitt4 жыл бұрын
Cost involved would be around 6-7k once it’s all said and done, I probably wouldn’t build one again for someone else just due to the many man hours involved, that being said the only thing you really save by building one yourself would be labor cost
@ricksasek54834 жыл бұрын
L look good keep up the good job
@davidwhite4474 Жыл бұрын
How muck weight does that trailer hold . That's all DMV cares about for the plate .
@johnbourgeois14143 жыл бұрын
Bad mistake not making tailgate to fold down from top because if you have something taller in the bed it will hang up
@GOVASLOCO4 жыл бұрын
SUPER CHINGONA 😎👍🏻
@GrowthMode2094 жыл бұрын
Nice trailer man!!!
@stantudor86199 ай бұрын
Bine asa.
@brentlebo9763 Жыл бұрын
Looking good what did it finely cost you?
@wheelrolling78 Жыл бұрын
Who sells the best plans for a 7 x 14 dump trailer?
@JB-mf1zc4 жыл бұрын
Don't worry about the mule just load the wagon! Watcha think? Lol
@j_moffitt4 жыл бұрын
Dang straight
@jaro2450m4 жыл бұрын
Holy shit it's easy 5k lbs just in trailer. After you will done can you go on scale to check how much is weights
@robertoa.rosariobare2219 ай бұрын
Sir, what is the price, for a trailer equal to this one, 12x6.5, and what is your address in the USA?
@robotops29294 жыл бұрын
Hell yea!
@autobodyrepairclearcoot41463 жыл бұрын
tuff Trailer For Concret Or Rocks Very Heavy Duty.
@user-ld3qb1pp5n3 ай бұрын
Класс
@EvgeniyMic3 жыл бұрын
Очень хороший надёжный прицеп.
@canamcartel9694 Жыл бұрын
How heavy was it when completed
@ryanstubblefield8593 Жыл бұрын
Im sure this has been asked but what shop welder setup are you using? Welder, wire, gas ?
@j_moffitt Жыл бұрын
Millermatic 252 .035 75/25
@ryanstubblefield8593 Жыл бұрын
Thanks Duder! You are a pretty good fabricator, like seeing your work.
@Tony-dz6yf4 жыл бұрын
Now that's a dump trailor!!! Do you have a materials list?
@j_moffitt4 жыл бұрын
Not necessarily, pt 1 has most of the materials I used but I did have to get some more later on
@Tony-dz6yf4 жыл бұрын
@@j_moffitt I did go back to part 1 super helpful! I appreciate it!
@jacksonredding81095 ай бұрын
What was the total cost?
@israelroque39214 жыл бұрын
Hi. I have some question. What Welder machine you have for welding the trailer? I want a buy one. But I don't not what machine is a more better... peleas tell me what machine you use .... thank you.....
@j_moffitt4 жыл бұрын
Millermatic 252
@levihollingsworth55174 жыл бұрын
What welder do you use for welding in flatbed and such lookin at gettin a different one
@j_moffitt4 жыл бұрын
I’ve got a millermatic 252
@nickshades67274 жыл бұрын
What's the cost on this build so far?
@d4ve5874 жыл бұрын
Sqauating and dumping 🤣😎seems normal
@mechanikbullert6994 жыл бұрын
nice job how much did it cost material
@j_moffitt4 жыл бұрын
Roughly 6-7k once it’s all said and done
@dcw15404 жыл бұрын
What does the weld on the outer fender edge do? Thanks
@j_moffitt4 жыл бұрын
It’s a piece of 1/2” round welded on for support and for a not so sharp edge
@sheilamclaughlin963 Жыл бұрын
U won’t like the ledge on the bottom, it’ll be full of stuff all the time
@eckscustomgarage66834 жыл бұрын
I’m sure this has already been asked. But what’s does it cost in materials to build something like this??
@j_moffitt4 жыл бұрын
Skip ahead a few videos
@eckscustomgarage66834 жыл бұрын
J_Moffitt thank you. It Came out really nice dude!