haha. Hopefully it's sooner than that. We do sell to Brew Keg Tap, Malt Miller, Keg Kingdom, and Angle Homebrew. If you ask these guys they can probably add them to their next order.

I think we are likely to see these in America in about 2-3 months from now.

@@KegLand Where can we buy these in the US? Do you have a direct partner / shop or is it just available at homebrew stores like MoreBeer?

@@nickdefrancis As these are very new you probably cannot find them in America just yet but they will be arriving to America within the next month or so. Best to send an email to Williams Brewing or MoreBeer and then ask them when the shipments of these will be arriving.

@@KegLand Great, thanks!

No worries at all. Thanks. We appreciate the support.

Thanks Mike. Appreciate the support.

Thanks for that. We appreciate it!

Thanks. Much appreciated.

No worries. Glad you enjoy them. I think they will be really popular.

We are updating all duotight fittings to include an indicator line for this, actually

Thanks Hot N Salty!

No worries. These ball lock disconnects are certainly a hot selling item.

Thanks for your business. Well at least these are not very expensive. You can still upgrade later on.

@@KegLand True, but have to play the waiting game for the stock to arrive. All good, the products are amazing as-is, you're just making them better. I have a suggestion for a new product- a ball lock connect with a duotight connect straight up (vertical) so you can put the auto stop device straight on top. It's just clunky as it is with the right-angle bends and multiple connectors. Sell it with the auto stop device as a package. Just an idea tho. Cheers

Yes these have been very popular

Yes should not be too long.

Yes this is a great future. In the design process this was not our primary objective and we thought it would be impossible to achieve this but luckily we have just been able to make these low enough for this to work.

Yes it will take a couple months for us to start shipping these to other countries but I am sure they will sell really well.

@@KegLand please ship to the Netherlands as well, Braumarkt and Brouwland are the 2 suppliers you need to get on board here and you will have basically all homebrewers.

@@Duci1989 If you ask Brouwland they will be able to order these for you now. Normally if retailers get asked for a product they will order it from us sooner.

Haha. Yes this might have to be one of our next products.

@@KegLand just got to design an autoclave lid for the kegmenter

@@andrewbarker1190 As the lid is already stainless steel this should be fairly simply. It's just a matter of swapping out some o-rings. Are you using the kegmenter for kettle souring or something?

@@KegLand I hadn't even thought about the kegmenter sterilising itself. No, I was just thinking about using a pressure vessel for sterilising some substrate for mushroom cultivation.

We do already have distributors in Europe. Where are you located in Europe?

@@KegLand Switzerland

Really good timing! Thanks for making a great product like this. How long before they are available on AliExpress?

@@davyboy555 It's hard to know. The team in China do sell some stuff on Aliexpress but our main priority is to get the products out to our distributors first.

@@KegLand I can't find many of your products in the US from your distributors

Yeah we spent quite a lot of time to make these as compact as possible.

@@KegLand I can tell 🍻

Yes absolutely. We are in the process of making another flow control ball lock disconnect model.

The answer to, "what more could you want?!?"

wow. They are expensive ball lock disconnects!

@@KegLand any excuse to visit the land of Oz!

This is a product that was easy to manufacture so it got finished earlier than expected and you can find the new Evabarrier 3mm ID here: www.kegland.com.au/evabarrier-3mm-1-8-x-6-35mm-1-4-double-wall-eva-12meter-length-in-bag-beer-line-gas-line.html

@@KegLand thanks, any chances I can find it in your Aliexpress store? Im in Europe

@@losFondos The Aliexpress sold products are mainly to service markets that we do not already have distributors operating. In Europe we have a number of distributors already but it just takes a bit of time for the new products to trickle all the way down to all the distributors.

@@KegLand how should we connect the new thinner beerline to a 5/8" shank? Is there for example a 6.35 push-in to 5/8 adapter?

@@losFondos You will have to go from 5/8 shank then use a reducer. So this will require 2 pieces. Alternatively we do have duotight shanks that have the 1/4 barb on the back so you can just put a female/female 1/4" (6.35mm) joiner to do this if this is the shank you are using.

Do you mean connect onto the co2 cylinder directly? This is not a good idea? The co2 cylinders are unregulated and contain about 1500psi. (depending on temperature) but these ball lock disconnects are only suitable of about 150psi.

if you contact www.morebeer.com they should be able to give you an arrival date. They distribute our gear in America

@@KegLand perfect. Good news

​@@umnomadenaestrada I checked with MoreBeer and Williams Brewing for availability. Both have them on order but no ETA yet.

Yes we intentionally make the Evabarrier tubing with a tight fit. Many customers find it easier to wet the tubing before insertion. This makes it a lot easier to go into the hole. The tight fit is important to get a leak proof seal.

I would try More Beer or Williams Brewing - These guys will most likley receive stock soon but best to contact them for an approximate arrival date.

Yes some of those plastic ones are totally garbage and the issue is some customers think that all plastic is garbage but really there is good and bad plastic and it's imporant to talk to your destributors about what plastics they are using so you can educate yourself on the difference. Good plastic costs a bit more but will last forever.

Yes you can do that if you like.

Yes we have all three sizes now on the website. So if it says only compatible with 6.35 (1/4) tubing then you are probably look at the wrong product. Have a look at the other models we also have on the website to take the larger tubing.

No

If you contact www.morebeer.com they should be able to give you a date. Hopefully it's not too much longer.

Yes, he said that about autoclaves.

That would be a tight squeeze with a lot of lines but technically it could be done.

No probably not. If you have pin lock legs I would suggest that you get rid of them on ebay. we have no plans to bring out any gear to suit pinlocks. sorry

😂

I am sorry but I think it's too high for this. The series x has 71cm clearance and the height of the 9.5L kegs are 37cm so it's just not quite going to work.

@@KegLand ahhh damn! Cheers though

These are already getting made right now. We will do a video on these really soon. We had to get these out of the way first as some of the parts in these fittings are getting also used in the new Flow Control model

@@KegLand you guys are crazy I love it lol

Starsan does attack acetal (POM) and when it dries up on the surface of acetal it can etch the surface and cause chemical attack. If left in wet starsan it's not an issue but the concentrating effect of starsan drying on the surface of the fitting is the issue. If it remains dilute on the fitthen they they will happily sit in starsan all year long. with that said the this new duotight ball lock disconnect and all new duotight fittings are now getting made from polyketone (PK) which has higher chemical resistance. As a result you will not get any "dissolving" issues that you are talking about. Also some other plastics like nylon can also dissolve in phosphoric acid (such as starsan) but we also do not use any nylon on any of our fittings for this reason either. CMB still make disconnects out of nylon which is not as chemically resistant as PK. So give these a go. You will not have any issues with chemical resistance and this is one of the key selling points of this new design.

@@KegLand Good news, Thank you! :D

We do sell these to thousands of different retailers including in china. They are most likely original as I have not seen a copy of these before.

Yup

Sorry the first batch was small and already sold. We have already a lot of these on the way though so we have thousands that will arrive September

accurate

@@monogramadikt5971 already pushed back to Sep 30th 🤣

Where did you purchase them from? That sounds a bit strange as you only need to tighten them finger tight to seal.

www.kegland.com.au/distributor

We are sold out in Australia but we have more arriving to our Noble Park Distribution Centre very soon. In the next couple months they will also start to pop up with our various distributors around the world. Where are you located?

Ireland

@@briandempsey9367 If that is the case best if you contact one of our distributors in UK. Probably Malt Miller or Angel Home Brew. They will probably order form us soon as they frequently purchase parts from us and will be able to put on their next order.

so no plans to bring out any pinlock accessories. They are just not that popular.

@@KegLand :(

That is only one feature. The previous disconnects also did not have as good chemical resistance, under high pressure the o-ring would pop off, and last of all these are more compact so we can fit them into products such as our new mini kegerator more easily.

haha. Yes sorry about that. The first batch sold out really fast. We have a large batch of them arriving on 6th September now.

Where are you based in Europe. We have a number of different distributors you can can contact here: www.google.com/maps/d/u/0/viewer?mid=1N99UwS4hcd_2aexS2kxaxc-VW2Qitmg6&ll=16.704713324407358%2C-140.17100376641093&z=2

@@KegLand Just checked with the places listed in Europe but none have them in Stock. Will you have them soon in your shop on Aliexpress soon

@@briandempsey9367 Sorry about that. This is a very new product and we are just ramping up production of these now. I think most likely you will see these in Europe and many other countries in another 2 months from now. As they are still very new it sometimes just takes a little bit longer for the stock to get out to all our distributors.

luckily no camera man was in the room it was just me

@@KegLand 😠