Installing a 57mm Turbo on the Evo X! (FULL DIY TUTORIAL)

Рет қаралды 40,583

Ай бұрын

Win the Evo X when it's complete! dvniemela.com/
AGT Turbo: artgennariturbo.com/
DownPipe: www.extremeturbosystems.com/c...
• Links to Where I Purchase Parts:
eBay: goo.gl/LwmuxE\
As an eBay Partner, I may be compensated if you make a purchase
Amazon: amzn.to/2z6hMbF
• Camera Equipment I Use:
Main Camera: amzn.to/2W2ZLId
Backup Camera: amzn.to/3gMgjwj
Go Pro: amzn.to/31Yi59n
Main Lens: amzn.to/2ZX7ZTB
Backup Lens: amzn.to/2W2OgAM
Photo Lens: amzn.to/2O8sc35
Microphone: amzn.to/31ZRDfo
Drone: amzn.to/3iMOIwJ
Gimbal: amzn.to/321daUZ
• Instagram: / dvniemela
• Facebook: / dvniemela
• Sponsors: (Discount Codes)
avalonking.com/ref/dvniemela (DEVIN25)
SK Tools: bit.ly/3mdXhSl (DVNIEMELA)
IAA: bit.ly/3cMmRKk (DEVIN23)
www.braumracing.com (DVNIEMELA)
www.prismaticpowders.com

Пікірлер: 80

@narkyt4356 Ай бұрын

Devin, I feel that you’re underrated within the community. Compared to other “big” channels, you definitely grind the hardest on these builds to get them done. Never mind the fact that it’s a one man show, for the most part.

@kennethnunez5682 Ай бұрын

Yes most definitely for the most part other KZfaqrs upload boring content that’s isn’t mostly rated to cars and aren’t constantly uploading. Most of them get their cars built by other unlike Devin he builds and shows the whole build.

@eddypro280 Ай бұрын

I also like the humility and humbleness that Devin shows, and it's really inspiring too see him work on cars even if he doesn't know em he always seems to figure it out and work with the best of it, and we can truly appreciate his work and creativity.@@kennethnunez5682

@pistonfury Ай бұрын

he is very underrated lol

@rushjunior7249 Ай бұрын

He definitely does and for someone who does almost everyday other than machine work this channel should be way bigger most the stuff he does other KZfaqrs outsource n this man is self taught

@shehzadsaifullah Ай бұрын

Agreed

@Ek9javier88 Ай бұрын

Man... this channel is top 3 in the car community on KZfaq. Good luck to all who enter the giveaway

@thomasmurphy5906 Ай бұрын

Remind me to put a new turbo on when the engine is out, that was technical

@excel4600c Ай бұрын

Reusing the stock manifold knowing they crack?

@xxtimeisthefireinwhichweburnxx Ай бұрын

This car truly has given me the feels for my old Mitsu. If you want to see the EVO hatchback I had, I posted a video. You helped me with a lot of it, Dev. Thanks...

@shawnmartin1841 Ай бұрын

Nice work Devin. You are a hard worker and very good at what you do. That car is going to be amazing for someone.

@KeViNMCMXXCIX Ай бұрын

Goat! Looking forward hearing it! Bet it sounds so good!

@JayycobVNM Ай бұрын

That manifold gonna. Crack like mine did 🥹💔 but overall exited for this car 😭 I hope I win this

@TheOriginalSpawn Ай бұрын

Great Job can't wait to see the next one💯

@joelh3364 Ай бұрын

Devin's content hits with no lag - just like a turbo!!!! Great content, always always find useful information.

@joshuaramos1587 Ай бұрын

love this car. underrated my man, stay true.

@doctorrobert60 Ай бұрын

Wow, many moves getting the old turbo out and the new one installed. Having this done in a shop surely would have a hefty labor cost and I would worry if steps were skipped to make the install faster. I would trust you to do the install Devin over some shops.

@Int_rs Ай бұрын

Looking Good!!

@Ouiya4200 Ай бұрын

I got the AGT 57mm turbo on my evo It’s amazing

@EvoxRich Ай бұрын

Looking into upgraded my stock turbo on my X. How is it man? Mods and how much are you making?🙏🏻

@Ouiya4200 28 күн бұрын

@@EvoxRich fully built, 1440 FIC injectors, gsc s2 cams, MAP exhaust manifold, I’m on speed density making 542whp at 34PSI

@Ouiya4200 28 күн бұрын

@@EvoxRich also my evo is a 9

@Metalution Ай бұрын

Having worked on many evo Xs in the past, it brings back many memories of struggling with that stupid turbo location.

@caskisner Ай бұрын

I'm loving this baby!!!!❤😊

@chriscook5770 Ай бұрын

Amazing progress! Hope to see updates on your personal White Evo X! Love watching new videos from you and @_baterbuiltracing! Would be a cool collaboration build on a STI one day with both of you building one in a video in the future.

@kylebrumley-lg2sr Ай бұрын

Right on bruh ur awesome and real🎉

@texaspowerman Ай бұрын

Next Evo look at the artec cast stainless manifold. They are solid and out flow just about anything out there. They also are open for sponsorship. I don’t know they have anyone doing Evo’s or Subarus. That’s going to make somebody a very nice ride.

@algarinpaint2012 Ай бұрын

I have a AGT 57mm on my Evo 8 and is wawzaaaa!!! 😂😁

@Guero.Evox27 Ай бұрын

I would’ve thought for sure you would upgrade the manifold, but overall good content!! It’s a sign i need to get mine done lol

@exor1238 Ай бұрын

Weird you are re-using the old manifold. They are known to crack even at low miles

@briannareid9423 Ай бұрын

We just put a gen 2 garret 35 76 on our 4b11 and it good but we are going bigger

@theELiTEboarder Ай бұрын

Tomorrow's video: "Replacing the Evo's Cracked Stock Manifold" 😫 On a real note, I'm excited to see how this turbo does, I'm deciding between the 57mm and the 62mm for mine. Lmk if you need any ash tray gauge pods for this build!

@Infinitoar Ай бұрын

Devin, like many others have stated, you're using the OEM exhaust manifold which is known to crack and cause really bad AFR issues. So your tuner is going to tune the Evo with inaccurate AFR's and potentially cause engine damage down the line for the new owner.(because the cracks only become bigger and more develop over time cause more exhaust leaks) I hope you change this manifold or at least the new owner does.

@projectpe4ce296 Ай бұрын

Ya that manifold gonna crack sometime down the line.. might as well get a good one and have peace of mind…

@starkcarmeets7462 Ай бұрын

Mr devin one day do a swap of 2jz engine in an Subaru Brz thank you , I will be greatful

@brandonferreira7379 Ай бұрын

The second you send high boost thru that turbo that oem manifolds gonna crack immediately. Mine did on the dyno, I wouldn’t be surprised if this one does too.

@shanegraham9077 Ай бұрын

12:16 cover that turbo hole . U don't want to drop a screw in that thennnnn take everything back off Devin 😅😅😅😢

@speedcircuit Ай бұрын

Great video. You should check out our XXL firewall heat shields if you decide to run a tubular mani in the future.

@thomasmitchell6921 Ай бұрын

Trying to understand why this was not done when the engine was out? Parts may not been available I guess Insane added labor Great Work

@angelbruno6556 Ай бұрын

Devin my boy you should replace that OEM manifold with map or something. They are notorious of cracking over due time.

@chavezzalexx Ай бұрын

Should have upgraded the manifold too. Stock ones are known for cracking

@buffetline2605 Ай бұрын

Why did Mitsubishi and Honda move their turbos to the back?

@Veggiephill Ай бұрын

I never enter these giveaways because I live in CA and my state is acoustic

@yeyo9741 Ай бұрын

try doing turbos on a infiniti q50 q60 you need to drop the motor but amazing content as always wish you well brother keep ip the good work

@milesgarcia5714 Ай бұрын

That turbo looks like a pain to remove for sure. But I think removing the stock twins on a mkiv Supra is probably worse.

@ItzHLK Ай бұрын

My 8 with AGT 57 BB made 470 mustang on 26lbs. Turbo had plenty of room left but had to stop there for stock internals. 500hp should be no problem for the X build

@memphisraines8118 29 күн бұрын

Just sent them an email because I don't know what type of housing and wastegate to go with for a stock block.. but I'm guessing 57mm is good?

@ItzHLK 29 күн бұрын

@@memphisraines8118 yeah 57m BB with the new Single Scroll housing would be fun. Stock bottom end is limited to 400 torque so can’t go much past that

@chrisvega3792 Ай бұрын

The best channel IN YT

@WoodsKushington Ай бұрын

anyone else upset he went through all that work to replace the turbo and dp but kept the stock manifold thats prone to cracking lol?

@itsvictorrivera Ай бұрын

I bet Devin has the highest count on turbo swaps for EVOs 🤣

@mrlt76 Ай бұрын

Devin, you didn't want to replace the exhaust manifold with an aftermarket one? Stock ones are prone to cracking.

Ай бұрын

GOOD

@luiscolon3722 Ай бұрын

Saludos desde ciudad Juárez Chihuahua México

@irelandshane1984 Ай бұрын

Hey man, what was the name of the black paint you recommended for trims? I took a pic of it in one of your videos but I cant find it 🙈 🙏

@wgc383 Ай бұрын

What a pain in the ass install that was

@terrencegillard8156 Ай бұрын

May I suggest blacking out the new intercooler.

@asherkimball8349 Ай бұрын

Devin idk if you ever figured out your white blood cell count but I know brake dust and other chemicals on cars can be bad for it! You could try wearing a mask and gloves when you work

@cj41079 Ай бұрын

I miss my 12 X 😢

@lcameeno1 Ай бұрын

Why the stock manifold devin? Its only going to crack

@jajajajaja8464 Ай бұрын

how much Horse power can a Exo x handle?

@andyfrias3992 Ай бұрын

Can you share the turbo link again? The one in the description doesn't work😕

@memphisraines8118 16 күн бұрын

Working for me 🤔

@lasersimonjohnson Ай бұрын

LINK to turbo in the description doesnt work

@kevinadkins8469 Ай бұрын

2nd 🎉

@nickdoescher9957 Ай бұрын

You sir have never worked on a mazdaspeed 6 and replaced a mazdaspeed 6 turbo it’s in the same location butttt the cowling doesn’t remove 🤣😂

@cv7609 Ай бұрын

Could've install that turbo when the engine is out

@JayMajic8 Ай бұрын

The link for the turbo is broken

@vincepieters6050 Ай бұрын

VASYN❤

@Wall3ye406 Ай бұрын

Your speech impediment is much better

@AllOutNoobHater Ай бұрын

Remove those tail lamps. They are horrible. Second, put the engine cover back on. Idk why you wouldn’t put it back on.

@cliftonthomas2393 29 күн бұрын

Why tear it all back off and worry about scratching it, and saying it's not fun to replace turbo, when the motor was out already? I would have just put it in while it was out....js