DX Giffard Rex ViStamp Review (Kamen Rider Revice)

Рет қаралды 5,658

2 жыл бұрын

REVI! GIFFARD FINISH!
VICE! GIFFARD FINISH!
FINAL REMIX!
Chou Hissatsu! Bari Vol Rolling (ROLLING!) Thunder Gale! (THUNDER GALE)
GIFFARD REX! Final Stamping!

Пікірлер: 29

@haydenreviewscustomcombos 2 жыл бұрын

Flipping the drivers to where they activate each other’s stamps is actually a really good idea. If I ever get a Revice Driver, I will have to get a second one in order to do this.

@beybladegeekusa7340 2 жыл бұрын

Extra stamp notes: - the lights of the stamp synch with the Libera Driver -The notches for the remix rod does work as an extra IR Sensor (though it just activates the same sounds it would normally)

@wooseokkim935 2 жыл бұрын

Hello KRX50. I watched your Kamen Rider review videos for awhile, and I wanted to thank you for doing the sponsorship with Buyee during your CSM Faiz gear review. Buyee did help me to get some of things that I wanted, such as:CSM DEN-O Belt & K-Taros and Memorial Progrise Key AIMS & ZAIA set. The former was hard to get as it cost $1000+ in Amazon (no joke), and also Den-O is my first Kamen Rider show that I watched and it is my favorite Heisei rider. Thank you once again and please keep up the great content.

@DarkDolphinGuy 2 жыл бұрын

I recently got the holy wing vistamp, I'm making my way up the main toyline this series, & all I need is the Thunder gale & Giffard Rex vistamps. Maybe some other premium bandai sets, like the Vail/Destream driver, maybe crimson vail vistamp, but I already preordered the vistamp selection set 03 with Kuwagata for Over Demons since I have the Demons driver. But I haven't gotten the Libera driver or the 1st vistamp selection set yet.

@ag_supersonic 2 жыл бұрын

5:09 BRO BECAME AN AUSTRALIAN LMAO

@omarcooper9168 2 жыл бұрын

MY DUDE SAID SHIPE!!

@haydenreviewscustomcombos 7 ай бұрын

It was probably just a slip of the tongue.

@phantomthiefdotnet 2 жыл бұрын

_Giffard Rex!_ *_Giffard Rex!_* *_Big Bang Come On! Giffard Rex!_* *_Ultimate Up!_* _Afuredasu atsuki jounetsu!_ *(Overflowing hot passion!)* _Ittaizentai! Hyouri ittai! Uchuu no chikara wa mugendai! Kamen Rider! _*_(Kamen Rider!)_* _Revi!_ *_Vice!_* _Let's go! Come on! Giffa!_ *_(Giffa!)_* _Giffard Rex!_

@Sundayp84TeamShadowStudio 2 жыл бұрын

I Love That DX

@mutanttepig4759 2 жыл бұрын

Awesome and funny way to actually activate both of them at the same time.

@beybladegeekusa7340 2 жыл бұрын

I think the cause for the stamper has to do with how magna doodle boards (which the pad for the driver and ohinbuster use) will wear out after prolonged usage

@joshuatierney5591 Жыл бұрын

13:44 does the ohinbuster with the giffard rex vistamp side s attached kinda remind you of stormbreaker from the mcu

@onyxwolfreaper21 2 жыл бұрын

10:38 Ok that’s clever, never thought of that XD

@MarcoFD Жыл бұрын

not sure if it affects it but @12:10 it looks like you took the honeycomb stamp pattern lens out of your old one and put it back in flipped 45 degrees. might affect its stamping

@Oma_Ender 2 жыл бұрын

It's not a wiring issue on the timing It's in the software qnd and how they recorded it for the toys. Also the issue with the stamp pad happened due to the pad itself being worn out from constant use the same issues happens with magnadoodles

@Zeromaru42 2 жыл бұрын

After a while the Iron Filings inside that make it work start to lose their magnetic power or even change polarity entirely so that's why the stamp pad wears out differently between the two. It's an issue that can be fixed but it's usually 10 times more annoying and difficult to fix for something that will eventually wear back out over time. It really just depends on the Pad you have because with some they have a stronger magnetic pull and can keep it going longer while others Stampers get used to being pressed in which prematurely agitates the Iron. That's what causes that problem and it's one of those things where it's not really avoidable and depends heavily on outside factors.

@Oma_Ender 2 жыл бұрын

@@Zeromaru42 thanks for the actual information on the make up on those.

@Zeromaru42 2 жыл бұрын

@@Oma_Ender No problem, I've tried to repair Magnadoodles before and while it is possible you're working at Microscopic scale on something that's ultimately not worth how painful it is. Unless you're a masochist it's just gonna be better to replace it. This type of thing is very cheap on paper which is probably why they did it, but an absolute bitch to try and do any type of maintenance or quality control on. It's a dirt cheap technique but critically flawed in that the very thing that makes it work, will also be the thing that ultimately breaks it.

@Oma_Ender 2 жыл бұрын

@@Zeromaru42 yeah they are cheap enough to the point that it's just not worth the time or headache. If I want to self torture there's other cheaper ways lol.

@tok-kunreviewer5099 2 жыл бұрын

When did you get another Revice Driver?

@coltchan7380 2 жыл бұрын

Kuuga called he wants his final form name back.

@UltramanMebiusBrave Жыл бұрын

But he won't. Because his final form's name is RISING Ultimate.

@chaosenforcerdhm969 Жыл бұрын

@@UltramanMebiusBraveno just ultimate

@mutanttepig4759 2 жыл бұрын

I love this pair of Vistamps. Too bad you can't do it at the same time without getting a second Revice Driver.

@zirotsero6951 Жыл бұрын

would have been cool if one(or both) could work with other drivers and had the same jingle as the revice driver(like how the holy live stamp has the same jingle in the revice and 2sidriver) so you could emulate the show with other drivers instead of a 2nd revice driver