Making the "Impossible Joint" 四方鎌継

Рет қаралды 7,188,748

3 жыл бұрын

Making Shihou Kama Tsugi (four-way goose neck joint). When you first look at it, it can be confusing as this joinery is on all four sides, without a way to be taken apart. But this joinery actually slides diagonally, making this "illusion" possible.
The wood is Walnut and Birch.
For more photos and videos on joineries,
check out my Instagram:
/ dylaniwakuni
Recommended books on Japanese woodworking, sharpening stones and measuring tools:
www.amazon.com/shop/dylaniwakuni
(affiliate link)
*As an Amazon Associate I earn from qualifying purchases
Free Sketch Up 3D joinery models:
www.dropbox.com/sh/ethawktkhz...
A cup of coffee is always greatly appreciated :)
www.buymeacoffee.com/dylaniwa...
#japanesewoodworking #traditionaljoineries #asmr #handtools #woodworking #woodjoinery

Пікірлер: 5 600

@adfhgadfsgasdf 3 жыл бұрын

after watching this, i was inspired and fixed a broken chair leg with duct tape.

@SenselessUsername 3 жыл бұрын

Too complicated! Instead I watched a video of a guy repairing a chair with duct tape --- was it you?

@irieanimalcare2736 3 жыл бұрын

I watched an instructional video on KZfaq on fixing a chair with duct tape, then I made an instructional video about fixing a chair with duct tape, and now others can make instructional videos on how to fix a chair with duct tape..

@SenselessUsername 3 жыл бұрын

@@irieanimalcare2736 Excellent news! I've got beer and crisps, I'll watch them all while sitting on the ground. I'm hoping to acquire a broken chair at some point in the lockdown.

@TheDrblu 3 жыл бұрын

Lol

@diegovaldes8411 3 жыл бұрын

Well, doing something is better than doing nothing.

@josephregester7780 3 жыл бұрын

I had accidentally turn on auto captioning before this video. Whenever chiseling would occur, a caption would say “Applause”. Who am I to argue with that.

@seraphim7512 3 жыл бұрын

Underrated comment

@racingheart92 3 жыл бұрын

It works, 😱😵😵👍

@TheDhauladhar 3 жыл бұрын

I am in the Nobel Committee, and I think I know who wins this year's Nobel in Literature

@bobhall7257 3 жыл бұрын

👏👏👏👏👏👏👏

@donnyandrya8068 3 жыл бұрын

Hahaha I am surprised when I saw "Applause " caption.. wtf

@keenanlarsen1639 2 жыл бұрын

My dad is a carpenter and he's always been impressed by Japanese woodworking. I get it now.

@ryanhass8716 11 ай бұрын

This is very interesting to me, not to mention very impressive. No intro, no dialogue, just a mind blowing level of precision and commitment to the craft.

@Mr.T-1000 3 жыл бұрын

I swear i spent 70% of the video admiring how sharp his chisels are.

@youngnutsack17 3 жыл бұрын

Japanese steel is top notch shit

@RAXITH_playz 3 жыл бұрын

Thank god! I'm not the only one 🙂

@chinmaychinmay7149 3 жыл бұрын

Same here

@apcook34 3 жыл бұрын

My wife used one of mine as a screwdriver when she could find a flathead

@Mr.T-1000 3 жыл бұрын

@@apcook34 haha,thats just something to use next time she says she puts up with so much,just be like " says the women who ruins a chisel i have spent and hr sharpening over a screw haha

@insanebmxthomas 3 жыл бұрын

"No joint is impossible" - Bob Marley

@Jess-cs8pk 3 жыл бұрын

Snoop dogg wants to know your location.

@ObamasBirthCertificate 3 жыл бұрын

Nice

@irgendopper8781 3 жыл бұрын

brilliant

@Preacher_. 3 жыл бұрын

RIP the great

@stevendwyer2479 3 жыл бұрын

My lime just brought this to 420

@70Se7en 2 жыл бұрын

Not the kind of joint I was expecting, but still a solid 10/10 execution.

@deinvater6376 2 жыл бұрын

Same

@siipi6331 2 жыл бұрын

This was exactly what I thought it would be. Just like in the thumbnail. "Impossible joint" is a magic trick / an illusion. Drugs are for stupid people, nobody should make videos of them. :)

@leviathan3630 2 жыл бұрын

@@siipi6331 haha drugs bad

@siipi6331 2 жыл бұрын

@@leviathan3630 Yes, they are. ;)

@DungeonTV100 2 жыл бұрын

Same, but I made one out of rizla and burned it anyway😂✊🤪

@slincolne 2 жыл бұрын

Amazing. The use of 'basic' hand tools is stunning - a clear demonstration of craftsmanship. Inspiring !

@jesusgaud8 3 жыл бұрын

Making an impossible joint is now legal in 16 states.

@robertinscoe2379 3 жыл бұрын

It's 4:20 somewhere.

@SRADracer 3 жыл бұрын

Was already legal for ages where i live 😊

@Nadheem721 3 жыл бұрын

😄😁☘

@a1graa 3 жыл бұрын

what

@NoCommentAtThisTime 3 жыл бұрын

Lol!

@zyguy8009 3 жыл бұрын

When I saw impossible joint making, this isn’t exactly what I had in mind

@comida_latina 3 жыл бұрын

I was expecting other kind of joint

@Kriiken 3 жыл бұрын

Thats why I clicked lol

@sidarigoz 2 жыл бұрын

That's the bait

@Nixons5thterm 2 жыл бұрын

Same here mate

@mavram 2 жыл бұрын

free the joint. legalize it!

@user-bt8bv5cn4b 2 жыл бұрын

先人たちの知恵と技術に感動。

@brianknow9142 2 жыл бұрын

Hijō ni jukuren shita shokunin. I apologize now of my translation didn't work.

@RobertBreckenridge13 2 жыл бұрын

I was expecting some steam and clamps, not laser chisel precision. Very impressive!

@fedyx1544 2 жыл бұрын

Steamed clamps

@ryanspence5831 2 жыл бұрын

@@fedyx1544 An unforgettable furnishing

@topiuusi-seppa5277 2 жыл бұрын

Same, though i believe that option would've needed quite some laser chisel precision too.

@Ozone946 2 жыл бұрын

@@fedyx1544 steamed clamps??

@alexanderenrique3058 2 жыл бұрын

@@Ozone946 Yes. It's a regional dialect.

@freedomcaller 3 жыл бұрын

This video isn't click bait, but the joint itself is.

@thecurrentmoment 3 жыл бұрын

I too was disappointed that it is not impossible

@CtrlAltRetreat 3 жыл бұрын

It's smart and plays on pretty clear assumptions. When I saw the diagonal profile I actually laughed out loud and thought it was brilliant. This is one of those things where if I bought one I would say "I not sure how they did it either but I'm sure it isn't a veneer"

@Anvilcjl 3 жыл бұрын

I think so too because it’s an illusion, and a lot of extra work for something that probably isn’t as strong as a simpler joint and weaker than what it appears to be.

@coolyeah2410 3 жыл бұрын

@@Anvilcjl well no,because this joint have actualy been used time and time again in Japan

@kdr1235 3 жыл бұрын

Yall really suprised that the video "making the impossible joint" is not about making an acually impossible joint. Like duh, he cant make something that is impossible to make. The joint is called "impossible to make" coz of how it looks

@larss337 3 жыл бұрын

Its so relaxing to watch this master craftsman working. No unnecessary music or talking, just the tapping on the chisel. Thank you for posting this.

@dylaniwakuni 3 жыл бұрын

Happy to hear that! Cheers! 🙌

@silverishme8675 3 жыл бұрын

I cant believe how many fantastic videos are ruined by obnoxious music.

@jimybobjim 3 жыл бұрын

@@silverishme8675 haha yea

@DamageMaximo 3 жыл бұрын

Sure, your preference! Cheers

@DamageMaximo 3 жыл бұрын

@@silverishme8675 Sure, your preference! Cheers

@yuwish6320 2 жыл бұрын

Traditional Japanese woodworking is positively beautiful, as well as ingenious. Those chisels are stupid sharp.

@aaronmcneal1698 8 ай бұрын

I'm impressed that this was done by hand and not by modern machinery. I've seen this joint before but never cut by hand. Beautiful work.

@nenaddimitrijevic1147 3 жыл бұрын

I watched the whole video just to find out how it fits

@lefaxiong 3 жыл бұрын

I watched the end of the video just to finds out how it fit sooner

@Nickelodeon81 3 жыл бұрын

I skipped to the end...

@Nobddy 3 жыл бұрын

Noob. I skipped to the last minute

@kakigame9521 3 жыл бұрын

I dont even play the video. I just let my wife tell me how it fits after she done watch the video.

@marcbactxion 3 жыл бұрын

Totaalmeente.. increible ingenio

@mrtrigger2016 3 жыл бұрын

I'm honestly impressed by the craftsmanship. I wasn't expecting the hand tools!

@DK-lz7kg 3 жыл бұрын

I’m not sure this would be really doable with power tools. The wood work is too delicate for that

@gunsandroses896 3 жыл бұрын

@@DK-lz7kg I agree. Sometimes, you need the lighter touch of a human handsaw rather than a circular saw. Much more precise, even if it takes more time.

@yyhrva5605 3 жыл бұрын

@@DK-lz7kg maybe a CNC machine but idk

@OhSoTiredMan 2 жыл бұрын

His skills are at peak perfection

@a.carneirozhu8104 2 жыл бұрын

@@yyhrva5605 Yea I've seen other youtubers do it with a CNC machine, the fact that this guy did it all by hand is amazing

@tachi98lep 2 жыл бұрын

What an incredible joint to make! The super sharp chisels and the accuracy of the cuts with the saws, inspirational!

@thegardner800 2 жыл бұрын

Japanese woodworking craftsmanship is second to none...💯☝🤫

@AGfrom83 3 жыл бұрын

I'm more impressed with how sharp your chisels are. Jesus.

@jwd215 3 жыл бұрын

Yeap, especially when chiseling against the grain

@chvishal 3 жыл бұрын

I was thinking it's the wood being soft or some shi lol

@terrydavis2552 3 жыл бұрын

Same there - jeez, one slip and down a finger or two!

@robertinscoe2379 3 жыл бұрын

I took a woodworking class and the first two days were spend on how to sharpen cutting tools. This was on timber frame houses. Wish I could remember it now.😄 neat video.

@superchroma 3 жыл бұрын

It is necessary.

@rand5106 3 жыл бұрын

The noise of the sped-up chiselling is sooo satisfying

@korniso 3 жыл бұрын

Its perry the platapus!

@sheerenergy8602 3 жыл бұрын

Its like woodpecker.

@frankroquemore4946 3 жыл бұрын

Watch at 2x speed. It's even better

@OnepieceEp 3 жыл бұрын

Trrrrrr trrrrr tar tarrrr

@mikmop 3 жыл бұрын

It's like a musical machine gun

@someonesdaughter3180 2 жыл бұрын

This is amazing. Elegant and precise. Woodcrsfting in this manner is so rare these days. Thank you💛

@takaorobinson8719 Жыл бұрын

Elegant and precise are often used to describe musicians, authors, athletes. I love that it can also be used for this. Artistic design that's functional.

@bcb2585 2 жыл бұрын

I am thoroughly impressed! It just shows me how much I have left to learn. I love this type of content, as opposed to the videos that show simple hacks, because this type of video shows you that there is still virtue in dedication and doing hard things. Very inspiring.

@takaorobinson8719 Жыл бұрын

Well said

@farklefuster6876 3 жыл бұрын

His control is amazing. Notice how he takes small cuts as he chisels. Also notice the backside of his chisel is like a mirror.

@dylaniwakuni 3 жыл бұрын

You noticed two great points! Cheers!

@BlueZirnitra 3 жыл бұрын

That's really how chisels are meant to be used. Same reason chefs don't bludgeon wildly with a knife. It's a fine skill but an essential part of woodworking otherwise you're not going to be able to make anything presentable.

@hellfire33100 3 жыл бұрын

It is said you can tell a lot about some one based on the condition of their tools. Amazing work and amazing skill.

@primeaucourant1176 3 жыл бұрын

3:35 Video: person making the most complex joint KZfaq caption : applause

@muhammadaqil7025 2 жыл бұрын

even KZfaq impressed by his craftsmanship

@yancybuenavista9032 2 жыл бұрын

Lmao

@rileykortemusic 2 жыл бұрын

I had the same thing 😂

@ungabungalunga1002 2 жыл бұрын

Haha

@Chips308 2 жыл бұрын

I am going to a timber school soon. And I have tried to make wood joints before and failed horribly, but I know how much patience and perfection you need for these thing. So great job 👏

@Milan-db3uy 3 жыл бұрын

The fact that he did it all with his hand tools and did not use machines makes it so much better.

@bur2000 3 жыл бұрын

Judging from the sound he used a hydraulic hammer. Since this is youtube, where users are slower than elsewhere: I am joking. And if you were just enraged, then this means you, yes.

@williamoneswhannell1060 3 жыл бұрын

Tbf that's how all carpenters make joints if they are worth their salt

@lounirs 3 жыл бұрын

@@bur2000 ???¿???

@zacmumblethunder7466 3 жыл бұрын

@@bur2000 Looked more like a hydraulic arm than a hammer to me. That sawing was of Steve Austin standard. For anyone under 40, not the wrestler.

@ayoutubehogotztaeattoo2871 3 жыл бұрын

it's the artistry of the design of the structural integrity that makes it 'better' - NOT the lack of using machines.

@grandpabill6684 3 жыл бұрын

Wow ! I'm a welder of 35yrs I have since retired my eyes have waned but , they're still good enough to recognize the work of a Master ! What a gifted set of hands I would be proud to work / learn from your skill set . It is my hope that you have and are teaching a room full of apprentice's your craftsmanship you are an Artisan !!

@Franc822 3 жыл бұрын

Hope ur eyes get better

@everythingsalright1121 3 жыл бұрын

Its always good to see people well versed in the field of craftsmanship praising one another

@imho2278 3 жыл бұрын

If you have cataracts and can get surgery, life is much brighter.

@grandpabill6684 3 жыл бұрын

@@imho2278 Thank you for your response ! I don't have cataracts. I'm just an old fart who is losing his visual acuity . Wearing glasses is about as good as it's gonna get for me . 😎

@_Solaris 3 жыл бұрын

Check out Grampa Amu. He'll blow your mind. ...fellow welder here, btw.

@CVSoprano 2 жыл бұрын

I have no idea how the algorithm put this in my feed, but it was absolutely captivating.

@Shotsmoky 2 жыл бұрын

I don't know what's more impressive. The layout of the work or the incredible chisel work . Truly amazing art.

@sihTdaeRtnaCuoY 3 жыл бұрын

I love how the title doesn't even mention that it's done entirely with hand tools. Masterful work.

@RyanLeeW 2 жыл бұрын

@@marxgalacticambition7023 nope, it entirely matters how it was made.

@farihmuhammad8838 3 жыл бұрын

Seeing thumbnail : what? How? See the diagonal join : Ah, that make sense.

@cube4547 3 жыл бұрын

Thanks for your insight

@johncarlofernandez2698 3 жыл бұрын

From impossible joint to sorta possible joint

@HandledToaster2 3 жыл бұрын

This is peak KZfaq comment brainpower

@fireemblemistrash75 2 жыл бұрын

@@johncarlofernandez2698 its 100% possible tho

@ambrosxa 2 жыл бұрын

reminds me of the dove box

@abdusserally7437 Жыл бұрын

Japanese joinery is always perfection, amazing.

@andoorinn6015 2 жыл бұрын

ただ、ただ、素晴らしい。日本人の誇りが、この動画に存在する。

@haziqsembilanlima 3 жыл бұрын

when they said people back then can make homes out of wood without a single nail, this video proved how that is possible

@zacmumblethunder7466 3 жыл бұрын

There's a bridge in Cambridge, England, that was built without nails.

@GlitchTechV1 3 жыл бұрын

Yeah I'm glad I got to witness fine Craftsman but damn

@laspilly 3 жыл бұрын

They built entire castles in Japan

@greebj 3 жыл бұрын

And yet at the same time because this one join is this labour intensive, why it is also functionally impossible in today's world

@softwarelivre2389 3 жыл бұрын

@@greebj you can automate the procedure, though

@Helxas 3 жыл бұрын

This guy makes it look easy, but that precision with handtools? That's serious dedication to craft and project, with a heap of talent to boot.

@cube4547 3 жыл бұрын

If you keep talking like this you'll never achieve anything in your life

@dovydasgrigas441 3 жыл бұрын

@@cube4547 Ahh yes appreciating other peoples hard work means you will never achieve something.

@Santi-bt7if 3 жыл бұрын

It looks so difficult because of the speed-up. Wood-carving is so slow that as long as you're using the proper techniques and not too much brute force, accuracy isn't a problem. It's mostly about knowledge and keeping your tools in good condition.

@animeizsyellenide 3 жыл бұрын

I think wording it as hard work, practice and skill would've been better than talent

@cube4547 3 жыл бұрын

@@dovydasgrigas441 there's no such thing as talent. If you keep thinking you need some magic, help from god or genetic luck to be relatively successful, skilled or knowledgeable then you'll never be any of those things.

@patientred3203 2 жыл бұрын

Cool stuff. I love the showing of the whole outside before any marking/shaping. It's fun to pause after seeing the 4 faces, and take a moment to figure out the possible inside shapes!

@sasikala5305 2 жыл бұрын

"I am more than a power tool myself"-Dylan Ivakuni

@dahwe12 3 жыл бұрын

Boss- "This looks great, we're gonna need a thousand of these by tomorrow."

@MaDrung 3 жыл бұрын

Because you're so good with it, you're from now on responsible for it

@piratekingthaszar7912 3 жыл бұрын

Boss: "Congratulations! You are a victim of your own success."

@robdom91 3 жыл бұрын

This... is why I don't get coffee breaks anymore...

@dahwe12 3 жыл бұрын

@@robdom91 right!

@Varimos 3 жыл бұрын

And what i do after lunch ?

@ChrisDidGood 3 жыл бұрын

I love watching things that make me realize just how much I suck at everything.

@rodrigoiglesias6938 3 жыл бұрын

That's what she said

@ayoutubehogotztaeattoo2871 3 жыл бұрын

I hate watching things like that

@HandledToaster2 3 жыл бұрын

Maybe stop watching and learn something instead? Naaaaah, too hard.

@chaosismyway690 3 жыл бұрын

@@HandledToaster2 people learn by watching though.......No?

@HandledToaster2 3 жыл бұрын

@@chaosismyway690 have you learned woodcrafting from this video?

@Redplane500 2 жыл бұрын

Amazing Japanese wood craftsmanship!

@meme9492 2 жыл бұрын

It is in fact an illusion, but one of absolute brilliance. This is what woodworking is all about. I couldn't hope to get something like this right if I tried it. Hat's off to you!

@NickC_222 2 жыл бұрын

Man, this kind of chisel work always blows my mind and impresses the hell out of me because I know there's no way I could ever achieve that kind of perfection, shaving off exactly the right amount, getting all the flats just right. If any one of then isn't just right then the piece either won't assemble, or it might have gaps. That level of precision is just exceptional to me.

@truthneverlies4922 2 жыл бұрын

You could if you have the right chisels and patience

@tmmnago2722 2 жыл бұрын

This isn't talent. It's a skill through repeated actions.

@totsuka2213 2 жыл бұрын

@@tmmnago2722 This guy gets it. There is nothing to prevent the average person from achieving this level of craftsmanship, save for years and years of practice.

@fatimaalaa2659 2 жыл бұрын

@@totsuka2213 well I think the dedication that must've gone into achieving this level of skill is very impressive

@whyshouldsergregorturnbrig6879 2 жыл бұрын

Dude you absolutely could make this, all it takes is patience

@ivandovranic5834 3 жыл бұрын

No machines, no chemistry magicks, not even sand paper. Only chisels, saw, wooden clamps, some hammering. And godlike dedication.

@mro4922 3 жыл бұрын

those chisels were sharpened somehow

@frankroquemore4946 3 жыл бұрын

@@mro4922 You can hand sharpen to a mirror finish like that... I've done it multiple times over the last 3 days.

@nexus8516 3 жыл бұрын

@@mro4922 probably on a stone.

@jacobbass2056 3 жыл бұрын

That lumber is definitely sandblasted before he buys it tough

@Franc822 3 жыл бұрын

And to think ancient chinese slaves had to do thousands of joints like these for buildings

@hemannjatia2062 2 жыл бұрын

Absolutely fascinating. World-class pin-point chiseling to create a wonderful joint. Which is not only beautiful but also seems to be strong as well. Lovely stuff keep it up!

@evora9081 2 жыл бұрын

Takes skill, patience and years of practice to achieve this. How the 2 pieces slotted into each other is like magic.

@Mimirai 2 жыл бұрын

Imagine there being a disclaimer... "*This footage is not sped up.*"

@papyfun5097 2 жыл бұрын

me: enables 2x speed

@toob_shoob1324 2 жыл бұрын

That would be funny because technicly the video asked

@toob_shoob1324 2 жыл бұрын

Howb

@josephg9249 2 жыл бұрын

Why on earth have 300 people liked this moronic comment. What an asinine thing to say. *Sees slowed down content* “Imagine if there was a disclaimer that said this isnt slowed down LOOOOOL hhahhaha so funny!!!”

@TeaTabby 2 жыл бұрын

@@josephg9249 r/woooosh

@HITARIX 2 жыл бұрын

As a Danish carpenter and woodworker, I find this very fascinating. I haven’t seen a joint like that before. Beautiful!

@eugenesilence4009 2 жыл бұрын

go china, u will see more than this,this construction be called '榫卯' in chinese. 事实上,日本的木工技术是从中国流传进入的

@amanjha5916 2 жыл бұрын

@@eugenesilence4009 lol

@Muscovy7 2 жыл бұрын

@@eugenesilence4009 and yet China can’t build roads that don’t fall apart and collapse daily

@tomate045 2 жыл бұрын

@@eugenesilence4009 Your social credits have been increased. Congratulations!

@eric_asa_c 2 жыл бұрын

The two modern China don’t use this technique anymore. Cost to much time and money.

@charlesphillips8635 Жыл бұрын

Bravo. The precision of each cut is mind bending, and not a piece of sand paper in sight! 👏

@Hungrybird474 2 жыл бұрын

That’s fricken amazing patience and craftsmanship .

@RichardM-kv4uu 3 жыл бұрын

I love how impossible it looks at first glance, then finding out the solution is very simple - or as simple as it could be if you're a master carpenter!

@nfrancisj2122 3 жыл бұрын

1000 years in future, people will find this joint, and think it was built by aliens.

@NetiNeti-gm5bz 3 жыл бұрын

What if we're aliens pretending to be humans

@EmilyOrtiz 3 жыл бұрын

😄😄😄

@YeshuaIsTheTruth 3 жыл бұрын

"People in 2020 couldn't have possibly been this smart, they must have had help!" - People in 3020

@esotericist 3 жыл бұрын

i've lived in 10 countries and 2 planets. Planet earth and planet Japan.

@BlueZirnitra 3 жыл бұрын

Right, because it would be unfathomable to future humans that past humans had any skills? Do people think archaeology is the study of alien artifacts?

@michaelgolub2019 2 жыл бұрын

Amazing! Such a precise job without any machinery!

@wirebrushproductions1001 6 күн бұрын

Any joint which joins a beam with a square cross section, and produces 4 identical faces is conceptually easy. It takes precission layout and execution, but the idea is simple enough.You could even make curlicue faces, although that would be a REAL challenge.

@markfieten9558 3 жыл бұрын

Only one possible conclusion: I know nothing about woodworking

@jub8891 3 жыл бұрын

you should at least know that it requires wood.. and working with wood

@BenBLR 3 жыл бұрын

@@jub8891 NO SHlT????

@zidan2360 3 жыл бұрын

@@jub8891 GODDAMN!

@banant5620 3 жыл бұрын

@@jub8891 My eyes have been opened

@kris_py 3 жыл бұрын

@@jub8891 Sherlock Holmes, that you?

@renderizer01 3 жыл бұрын

That flow of sped-up background noises (church bells, cars, voices et all) is a treat on its own.

@AlexandruVataman 28 күн бұрын

Finally after a couple of years of KZfaq recommendations, I watch this video.

@danny5327 Жыл бұрын

This is an amazing joint that just stumps the European style joinery loved it great execution!!!

@mnnptl 3 жыл бұрын

I love how the wood is hard yet so soft. Edit: Oh no, what did I just say

@DamageMaximo 3 жыл бұрын

lmfao

@chipperphilly5083 3 жыл бұрын

I feel you man

@tempestshadow9992 3 жыл бұрын

Hol’ up 03-30-31 12:01 AM (PDT)

@stuff3862 3 жыл бұрын

ha ha thats funny

@mist3325 3 жыл бұрын

Haha, I hope it was intentional!

@CYGNIUS 2 жыл бұрын

*I love the sound of sped up wood chiseling.*

@devinhence3104 2 жыл бұрын

Wanna hear a metal version of this?! (surprised this has nothing to do with my metal music lol) I actually use this vid to sleep to. kzfaq.info/get/bejne/o7uWfpaa2p2Rfmg.html

@CH-gm6rl 2 жыл бұрын

perry the platypus sounding ass

@clockworkNate 2 жыл бұрын

Kinda sounds like someone is doing a bit of bedroom woodworking lol

@squiggles5640 2 жыл бұрын

reminds me of a woodpecker which i guess is pretty fitting

@Ashish.1.1 2 жыл бұрын

yay 100th like by me

@Kiwi-fl8te 2 жыл бұрын

That's pretty much the trick I expected from looking at the thumbnail. Really nicely done !

@peterfrigge5803 2 жыл бұрын

I was simply fascinated by watching this video. This is truly art of worksmanship! Respect!

@johnathonfrancisco8112 3 жыл бұрын

Thank you for graciously showing us how you made that joint. I thought you might have done it another way, but seeing this solution has opened up entirely new doors to solutions in the future for me to use. Thank you again, this kind of thing is helping me improve my repertoire in joinery, and I appreciate it greatly

@user-nb8yt2il2r 2 жыл бұрын

Yeah i though it was only on two sides and figured it was a twist on kind of thing

@SuperSpatman 3 жыл бұрын

If there's one thing I've learned about "impossible joints," it's that whatever it looks like is a lie.

@ronaldharris6569 3 жыл бұрын

Its called an optical illusion, magicians use them all the time this was a neat example of one

@fomoran 3 жыл бұрын

@@ronaldharris6569 always do amusing that usually the trick of the trick is pushing the boundaries if credulity. The tricked watcher can't even conceive of the work that went into the staging of a seemingly simple trick. A often it's about putting in a lot more effort than people would suppose anyone would invest for the result. Magic I mean, not the woodworking.

@asiastreets4032 3 жыл бұрын

Is a very beautiful joints, and that is the meaning with this joint

@bval2201 3 жыл бұрын

@ronaldharris6569 3 жыл бұрын

@@asiastreets4032 and it is as strong as the wood so it's a good thing

@MrDaveCoetzee 2 жыл бұрын

So satisfying watching a master craftsman at work!

@ZorroVulpes 2 жыл бұрын

I really like when a video just shows you exactly what's going to be in it, no clickbait. I could definitely not smoke this joint.

@virginiogarcesjr293 2 жыл бұрын

A combination of evenly grained wood, sharpest tools, a steady hand and focused mind, yes this is great accomplishment. I am amazed Congratulations and thanks for sharing this seemingly impossible task!

@SargentandGreenLeaf 2 жыл бұрын

Why do you send comments out into the ether? What purpose does it serve?

@valx5 2 жыл бұрын

@@SargentandGreenLeaf aren’t you doing the same thing right now? also why do you care?

@rorychivers8769 2 жыл бұрын

Nothing serves any purpose, all comments are fleeting moments that are glimpsed only by a vanishing few and leave no trace or meaningful impact behind them before they are inevitably forgotten. Including this one :D

@honuman39 2 жыл бұрын

@@rorychivers8769 lost... Like tears... In the rain -The man, Rutgur Hauer

@coreymoore1443 3 жыл бұрын

Me: That’s impossible. Woodworker: I know what I’m about, son.

@acedia_14 2 жыл бұрын

Give me all the bacon and eggs you have

@nish720 2 жыл бұрын

DELETE ALL PICTURES OF RON!

@coreymoore1443 2 жыл бұрын

I call this a turf 'n' turf.

@earbjr4715 2 жыл бұрын

The world needs more of this. Love it!

@scaira60 2 жыл бұрын

Truly Amazing as a 61yr old woodworker who still cuts mortise & tennons & Dovetails by hand, I don’t think I could make this joint even if I practiced for the next 10yrs👏👏💪💪🔨🪚📐👨🏻‍🦯👨🏻‍🦯

@champy5095 2 жыл бұрын

japanese woodworking is really incredible how clean it is

@christophaltmann8711 3 жыл бұрын

This is not woodcraft, it is woodart. I am stunned and fascinated by this performance.

@dylaniwakuni 3 жыл бұрын

Thank you 😊

@nathanwhite609 3 жыл бұрын

I thought it was witchcraft

@malikbarbrie5257 3 жыл бұрын

@mapleholler9800 3 жыл бұрын

I usually scroll through videos like this to save time, just wanting to get an idea of how the affects are achieved. But the precision and sharpness of the tools were mesmerizing. Had to watch it all the way through. If any of my tools were that sharp, I'd be a danger to myself and anyone within arm's reach. Truely amazing work. Thank you for the video.

@dylaniwakuni 3 жыл бұрын

Thank you! That's great to hear! 😊

@mikelliteras397 3 жыл бұрын

Same here, first I had to guess at how it pops together, then I wondered how he got those tools so sharp where he could push them through hard wood. I ended up watching everything

@Hermelin.G1 3 жыл бұрын

sharp tools are safer than stump tools😉

@jimmurphy6095 3 жыл бұрын

@@Hermelin.G1 Exactly... Less force is required to push the tool through the material. Less chance of a slip.

@Hermelin.G1 3 жыл бұрын

@@jimmurphy6095 absolutely correct!

@jaylenwilder6147 2 жыл бұрын

It’s very nice, the cabinet company I work with uses this joint quotes often. We have a machine that does it for us so we can have the consistency. I really admire the handwork, that’s another level

@FernieCanto 2 жыл бұрын

The crazy thing is that you might think the video maker is "tricking" you until the ending, but actually, the "trick" is right there in the description. It''s just that the video is so mesmerising that, well, who's gonna *read* before hand? Congratulations for the great work!

@whitedragon4050 3 жыл бұрын

The wonderful free thinking mind that created this joint is of godly knowledge.

@ibealion1 3 жыл бұрын

Wowsers... you have apparently never met God.

@herrvorragend1175 3 жыл бұрын

@@ibealion1 well, have you?

@ibealion1 3 жыл бұрын

@@herrvorragend1175 I have... Dec 14th, 2011 sometime between 1:00 and 3:00 a.m. I was quite distressed, so I don't know the exact time... but it was by far, the most wonderful and life-changing moment of my life.

@herrvorragend1175 3 жыл бұрын

@@ibealion1 I'm happy for you then :)

@BlueZirnitra 3 жыл бұрын

@@ibealion1 That can't be true because he was visiting my grandma at that time. Are you sure it wasn't a burglar or a sleepwalking family member?

@HighMaintenancePS 3 жыл бұрын

Imagine the competency of the craftsman who invented this joint.

@jenn976 Жыл бұрын

This is exactly what I had in mind. I *love* this kind of joinery. Beautifully done and well-executed.

@dylaniwakuni Жыл бұрын

Thanks 😊

@adnankaba3372 Жыл бұрын

Nothing but a saw, chisel & mallet! No power tools...very intricate!

@sauropod5393 3 жыл бұрын

I closed my eyes and his chiseling sounded like a descent of woodpeckers. Amazing skill work. Ciao from Little Italy 🇮🇹 Montréal

@dragonfury1565 3 жыл бұрын

Am i the only one who thinks that this is really satisfying? Both the sound and seeing him slowly chisel away at the wood

@SvenGBerlin 2 жыл бұрын

"slowly"... I wish I could chisel away hardwood at this speed with this precision. (Yes, I'm aware the footage is sped up)

@colinsmith6116 8 ай бұрын

I must say that when I first saw it I thought that it was an impossible joint, but through wonderful craftsmanship and ingenuity this joint is magic. Wonderful crafysmanship.

@omahanprabla3058 2 жыл бұрын

Always a pleasure watching a sharp chisel at work.

@amateurcinematics 3 жыл бұрын

Something about the sped up sounds of carving and chiseling is a bit mesmerizing

@UKallroad 3 жыл бұрын

I made this using light coloured wood and a dark brown felt tip.

@jvl4442 2 жыл бұрын

The editing and production of this video is of the same calibre of the talent seen within.

@kylewood2715 2 жыл бұрын

the look of the dark wood as it rolls away like clay, and the sped up sound of the hammer tapping at the chisels is just so satisfying

@takaorobinson8719 Жыл бұрын

Well said.

@teslainvestah5003 3 жыл бұрын

I would make an unfixable mistake so quickly. There isn't a single step to this process that I could not mangle beyond recognition. THOSE are some tight seams, bravo!

@Bumbassery 2 жыл бұрын

There’s something so therapeutic about hearing “hEH fhoo” when he was blowing away debris

@Wilson0621 2 жыл бұрын

Oogway

@BumboMcJumbo 2 жыл бұрын

...bumbo? But thats my name

@Bumbassery 2 жыл бұрын

@@BumboMcJumbo greetings fellow

@frostbite7553 2 жыл бұрын

The sound of wood carving is so relaxing to listen to, I could fall asleep to this video.

@lauragraves4342 Жыл бұрын

Beyond amazing job, and that dark wood sure is extra pretty. This takes great skill and patience! ❤️

@velocifero4167 3 жыл бұрын

The chiseling is pure ASMR

@miguelherrera5654 3 жыл бұрын

Bro same on 2x speed it is amazing

@_Solaris 3 жыл бұрын

Yeah, it is kinda. I noticed that.

@LuizAlexPhoenix 3 жыл бұрын

I felt so relaxed, this shit is entrancing.

@raviedavieu 2 жыл бұрын

It lowkey sounds like Perry the Platypus or keyboard clicking at times

@frog5984 2 жыл бұрын

You’re telling me that shit just slides in

@whyshouldsergregorturnbrig6879 2 жыл бұрын

Hur dur das wat she sed

@atlf3357 2 жыл бұрын

Think clean thoughts think clean thoughts think clean thoughts

@kladdha_ 2 жыл бұрын

That’s what’s she said

@cassandraa 2 жыл бұрын

Lmao

@yosshimaru7941 2 жыл бұрын

Constipation

@Quaxlabax 2 жыл бұрын

So good. It was super chill to watch. Thank you ❤️

@dylaniwakuni 2 жыл бұрын

Happy to hear that 😊

@rickschuman2926 2 жыл бұрын

I have sometimes wondered if the hidden surfaces were a little concave to allow easier assembly. I thought not. This confirms that. Well done.

@shmookins 2 жыл бұрын

14:26 That's the secret; it slides in from the side. Crazy precision, by the way. I can not do that.

@KuroKien 2 жыл бұрын

I know it's hard for us to do this shape, but I don't think it's secret. Most of the people know that's suppose to slides from the side during first time see this joint.

@luminous6969 2 жыл бұрын

Thank you for saving me from having to watch the entire video.

@michaelhaydenbell 2 жыл бұрын

@@luminous6969 That would have been tragic, eh? Glad you're ok.

@michaelhaydenbell 2 жыл бұрын

@@KuroKien Ok bud I don't think it's intended to mean it's literally a secret.

@saiyanultrainstinct551 3 жыл бұрын

Imagine building Noah’s ark with no electrical tools like this guy

@marsattack5194 3 жыл бұрын

And thats why noah is a metaphore

@ZaHandle 3 жыл бұрын

The ark is easy to build if you’re 400 years old and have access to all the animals on the planet

@noneed4sleep64 3 жыл бұрын

@@ZaHandle yeah, it’s getting the animals back where they belong that the tale falls apart

@blu3razr1 3 жыл бұрын

@@noneed4sleep64 or you know, the fact thats its not just animals that live on the planet, like bacteria, and plants

@ourtime-downhere6931 3 жыл бұрын

@@noneed4sleep64 you wouldn't be implying that those stories are made up are you? men wouldn't create stories to manipulate the behavior of the masses, what's the benefit of that? 🧐🤦‍♂️