I would have left that bolt you bought just cut it shorter. I have the same problem and you described it perfectly about your feet floating and my right foot sliding off the peg. I also had a knee problem bending around the stock air filter the old arthritis thing. Switched to a SE heavy breather and the problem is gone. Must do that install myself one day soon before my next upcoming long ride. Thanks for the video. Cheers!

Hi, I just did this kit on my 06 Dyna. The kit I used was from Vtwin mfg. The brake pedal ends up pretty far up for my taste even with the rod threaded all the way in. I ended up taking off the jam nut and the position is pretty close to perfect for my taste. I plan to remove the rod, have about 3/4 of an inch taken out of the straight section and then of course welded together and reinstall. I have seen quite a few others comment on the rod being too long and also very close to the exhaust or front bracket depending on adjustment. The left side is a breeze. The right side seems like it just about fits with zero room for error or adjustment. Now in my case if the nut on the master were to somehow miraculously slowly loosen up, it would drive the rod out and pedal up so i'm really not worried but I think this kit is very good exception of the rod and also Vtwins bolts are too soft. Thanks for the vid BTW.

Got installed without breaking anything, Really nice. I was able to remove extended reach seat😊😊.Good video!!

I'm doing right now, and mother ducker, same problem, t45 won't fit into footpeg,lol. And it's 8 o'clock on memorial day weekend so I'm screwed. I put it back together and will have to wait. I also ordered mini footboard to help with that forward control issue. I'll let you know how it works out. I'm riding an 03 wide glide with factory forwards. Thanks for the video,it's playing in the background

Great and informative video. Is it alot difference in angle on the brake/gear pedal if you compare the before and after?

Nice video. I was wondering about the engine guard mount to the down tube of the frame with the U-Bolt. Is that your fix to add the engine guard or is that how Harley does it? Either way , if it works it's good. Thanks.

At .56 secs. What size are those bolts for the forward control mounting bracket. Both of mine for some reason made from a very cheap metal and sheared both heads off only. Weak point where the torx head was joined to threaded section

Just ran across your video, putting these on today. Your about 2 exits away from me, i thought i recognized the road in your test drive.

I just wanted to mention midway through where I had to drill out that bolt... someone said it was probably attached with red Loctite and probably needed to be heated to be removed. So if you have a problem like I did you can try that.

I suspect red loctite was on that bolt that sheared the torx bit killer

Forward controls need 2" spacers to help flare your legs out or you'll have sore crotch muscles. Make sure your kit comes with spacers or you'll hate them.

Hey bro ... Thanks for the video ..am gonna buy a 2012 Street bob and want to install a mid control..pls Lemme know what the cost of the spares or if you have an used one i can buy it ..am from India

Thanks for the video. Bought an 03 Dyna and pedals are too far forward. Im 5'7. Just ordered my kit from JP Cycles.

I love Okabashi’s! Looks like you’re in N East Pa.

Did you buy the HD kit? How tall are you?

I need to do this on my 2011. Where did you get the kit? And how much was it?

where did you get the reduced reach seat pad

Did you not do the otherside?

Hoy me llegaron mis controles reducidos. Mañana los instalo. Veremos

Thanks for the video I got to do something like this. Couple days ago I bought the worst Harley somebody like me could buy. the old Dyna Wide Glide 🙄. I'm 5'7 and that thing is too wide too tall and too long. But it was a hell of a deal, I'll ride it for a minute and get another super glide. But in the meantime I got to bring these pegs back I'm almost afraid to ride the damn thing and that's never happened to me. Has anybody done what my mechanic suggested and just drill more holes in the stock bracket??

Where did you get this part? I need one ..

Where can I buy this kit?

How tall are you?

What highway bar do you have

bro your wind shield is very high might as well stick to a car man!!!