Dynamic Nike Sports Graphics with Cloth Engine in Cinema 4D 2023

Рет қаралды 288,331

Жыл бұрын

Hi Creatives,
Let´s create some amazing looking nike sports logo animation with the powerful cloth engine in Cinema 4D 2023.1.
The modular asset kit will be released middle of february 2023 on my gumroad...
markusgonser.gumroad.com/
You will get a 100% discount code for the asset kit download, when you subscribe to the Knights tier on my patreon until end of february 2023.
/ 3dbonfire
I´m excited about the new simulation framework for Cloth, Ropes and... Soft Bodies of course! It´s just so much faster and reliable and I see so many new ways how I can put this into my daily workflow as a 3D Artist.
With the release of Cinema 4D 2023 you get lot´s of new possibilities to create amazing and playful simulations for your 3D artworks. So let´s create this transparent Donut, filled with beautiful Soft Body Subsurface Jell-o´s.
PS: Impress your friends and pretend that you are learning Houdini;-).
Say hello on instagram...
/ markusgonser3d
Best,
Markus

Пікірлер: 103

@bilaladvertizer Жыл бұрын

great share more tips 2023 best 1 video

@orestespolisel Жыл бұрын

welcome to another AMAZING TUTORIAAALLL..... im addicted to it. Congrats on the solutions and observations while creating this... very helpful

@3DBONFIRE Жыл бұрын

Haha, thank you😉. I just...love to say this sentence in the beginning of tutorials🌠

@inthecue Жыл бұрын

thanks for explaining! Ich mag das!

@3DBONFIRE Жыл бұрын

Haha, some perfect german here👌

@maskedman Жыл бұрын

Looks better than real

@not7logic Жыл бұрын

awesome easy tutor!!!

@3DBONFIRE Жыл бұрын

Thank you

@mvmnt. Жыл бұрын

The small detail here that's missing is with how the NIKE logo falls onto the cloth. It would never fall flat and remain flat unless it was made out of a super dense material, and that would still need to be really thick. This looks like it's cut from plastic sheet, so the cloth weight would move the logo around when it falls. Just a small detail that would suspend the disbelief a little more. Otherwise - great tut!

@3DBONFIRE Жыл бұрын

Good point! I'll do better next time

@rodolfobuenano1315 Жыл бұрын

muy bien

@utilitylab Жыл бұрын

The modular kit reminds me alot of the Frevkens accessories by Teenage Engineering!

@3DBONFIRE Жыл бұрын

Oh I should have mentioned this! Of course, it was a huge inspiration and some pieces are recreations of it! I love the designs and wanted to play with them

@thefranz480 Жыл бұрын

Nice work ! What is the software to see all the images at the beginning? it's super smooth

@3DBONFIRE Жыл бұрын

Pureref👌

@channelfps Жыл бұрын

cool

@bassarrow Жыл бұрын

My gt710 after this : 💣

@Sketchyvisuals Жыл бұрын

Bro it's so rare I see a tutorial and think damn I wish I got to that first. This is amazing stuff!

@3DBONFIRE Жыл бұрын

Thank you, Bro💪

@nickmnft6927 Жыл бұрын

also my logo is going straight thru the cloth, even tho i have both collider and cloth tags on

@vovahripas3275 Жыл бұрын

tell me please how to make such a smooth viewport window

@beatsbynextacy Жыл бұрын

gut jemacht maggus

@3DBONFIRE Жыл бұрын

Danngge, nexxta👌🔥

@user-ef2cz5ov3y 11 ай бұрын

But I can't do it, something it's wrong but I don't know what wrong. Could you saw me the Parameter settings? Thank

@sinida8488 5 ай бұрын

Can u say about first steps ? i dont understand how i can do it...

@elcondies Жыл бұрын

Hola

@kirillmednikov9766 Жыл бұрын

Very cool tutorial, but I have a very laggy simulation (4fps). My computer is a PC 3060ti(8gb) I5 11400F. 32gb of RAM. Why is this happening? (Cinema4D R25.117)

@3DBONFIRE Жыл бұрын

Yes, I think it can be just slow even on good systems...in that case you could work with a lower poly cloth plane...

@dawidd1933 Жыл бұрын

Nice One! Thanks! What do you think about using marvelous designer + new cloth system? Your marvelous stuff was awesome and Im courius if you will back to that?

@3DBONFIRE Жыл бұрын

Right now I dont use marvelous so much sadly, because I´m having to much fun in c4d. But I hope that I can combine them in the future at some point again...

@dawidd1933 Жыл бұрын

@@3DBONFIRE Thanks for answer. Do you think that specific mesh from marvelous can work nice in tandem with c4d? With all wrinkles from marvelous etc? Need to test it.

@rbc-fut7017 Жыл бұрын

it would be possible to see the materials you used to have the same rendering in terms of quality ? Cordially

@3DBONFIRE Жыл бұрын

I have a tutorial for that on my patreon

@dsgnr2 Жыл бұрын

What render engine?

@madisonthom1305 9 ай бұрын

Can you do this with more text?

@benyafezstudio3603 Жыл бұрын

I hope there is tutorial like this using blender software. ❤

@3DBONFIRE Жыл бұрын

I don't know if Blender has a good cloth-engine...

@sezerturan4371 Жыл бұрын

of course they have. I've already made one and i can say cloth sim in Blender is very very good

@3DBONFIRE Жыл бұрын

@@sezerturan4371 good to know👍

@RhinoTimelaps Жыл бұрын

@@sezerturan4371 no. The simulation of cloth in blender is much worse than in Cinema. The simulation is very slow, it takes a long time to set it up to get the desired result. In cinema it's all quicker from setup to cloth simulation. I have experience with it, it's a terrible simulation. Especially when you compare it to Cinema 4D.

@rbc-fut7017 Жыл бұрын

Hello, when I simulate the animation my fabric disappears when the logo touches it. How to fix this ? Cordially

@3DBONFIRE Жыл бұрын

Hard to say...cloth is a bit unpredictale sadly...

@Willopo100 Жыл бұрын

how u get that cool vector logo pack

@3DBONFIRE Жыл бұрын

I just searched for 'sports brand logo' and it was...I think the first search entry to pinterest

@kadirtimur1982 Жыл бұрын

ı need this video for my brand

@3DBONFIRE Жыл бұрын

Well, just contact me if you want to book me👍

@Panzhixing 2 ай бұрын

@Kreyzen Жыл бұрын

Hello! I'm facing a problem, I added cloth to my plane, then added turbulence but the plane just doesn't wave or have turbulence at all regardless of changing the strength and scale. It's just a flat rectangle. I can't seem to find any solutions on the internet either.

@svsandoval Жыл бұрын

I had the same problem! I solved it by clicking play on the animation timeline at the bottom haha!

@vincentlprt Жыл бұрын

Hey ! Did you find a solution ? I have the same problem, sadly ...

@Kreyzen Жыл бұрын

@@vincentlprt unfortunately i did not bro...

@Kreyzen Жыл бұрын

@@svsandoval ah man, this didnt work for me

@vincentlprt Жыл бұрын

@@Kreyzen Alright, we might found that on another tutorial

@Willopo100 Жыл бұрын

i tried this on a mac. latest c4d. I think there is a bug because after like frames 30 the cloth just vanishes.

@Willopo100 Жыл бұрын

very interesting. switched from GPU to CPU and it no longer vanishes. Working on a mac m1 air. So not the most powerful machine

@3DBONFIRE Жыл бұрын

Vanishes...?! I think, I had this issue also! It suddenly appeared for no reason and I have a strong workmashine. Maybe try to delete the cloth tag and apply a new one? I'm not sure when this 'bug' appears...

@3DBONFIRE Жыл бұрын

I only had this once and I think it helped to just add a new cloth tag...

@edwarnaej Жыл бұрын

@@3DBONFIRE Can you tell me the specifications of your machine? that moves the simulations fast, the one I have takes about 10 min a frame

@ElAccos Жыл бұрын

what are the specs of your pc? it is to compare it with my toaster :')

@3DBONFIRE Жыл бұрын

oh hey, these simulations still take some time sadly. I have 2 3090 cards and a Ryzen 5950X and 256RAM

@ElAccos Жыл бұрын

@@3DBONFIRE thanks bro

@avallow1 Жыл бұрын

I wanted to know how a scene identical to this one in blender

@3DBONFIRE Жыл бұрын

Me No Blender sadly

@edreideadgamer3361 Жыл бұрын

and with blender?

@3DBONFIRE Жыл бұрын

I know nothing about blender sadly

@GabeHowardd Жыл бұрын

I need to call her

@3DBONFIRE Жыл бұрын

Sure, you will do the right thing 👍🌠

@JakeMMC Жыл бұрын

why dont you just tilt the plane and logo 90deg and add a collider body and a rigid body?

@3DBONFIRE Жыл бұрын

I can´t remember. Maybe I made it accidentally complicated without intention...

@JakeMMC Жыл бұрын

@@3DBONFIRE yeah and you could also have done a sort of bounce to it as well, try giving that a go if you get some time

@nickmnft6927 Жыл бұрын

you said you'd have an in depth version on patreon, I paid $20 for it and all i see are shader tutorials? whats up ?

@3DBONFIRE Жыл бұрын

I'm pretty sure, there is a project breakdown +lighting, and some shader lessons. But hey, just write me on patreon if you are not satisfied and you get your money back of course👍

@kushoten Жыл бұрын

Würde mit dir gerne was besprechen, wo kann man mit dir schreiben?

@3DBONFIRE Жыл бұрын

Am einfachsten auf insta markusgonser3d

@lyonstyle Жыл бұрын

could've been a good tutorial. too bad it's been locked by paid subscription for the more "professional" "next level" look

@3DBONFIRE Жыл бұрын

Sometimes more value comes with a pricetag. But I share a lot of knowledge for free on my channel, and sometimes its a bit hard to understand that people think every knowledge is for free... Think about it like this: I need to invest lots of time to learn that stuff and I dont keep it as a secret. I share a lot for free and whoever wants more, can pay for it.

@adr_hindi_gaming Жыл бұрын

My pc jump out of the window.. 😂 to heavy

@3DBONFIRE Жыл бұрын

Oh nooooo

@MylonasFilms Жыл бұрын

I'm sorry but this is a total spincter

@3DBONFIRE Жыл бұрын

Haha, oh no...now I can't unsee it🤣

@laura-elena25 Жыл бұрын

@@3DBONFIRELITERALMENTE

@AhadJamal Жыл бұрын

he just wanna sell his patreon page here :(

@3DBONFIRE Жыл бұрын

Hi Ahad, of course I try to sell my patreon, but at the same time you get also knowledge for free on youtube. I think there is nothing wrong with that. Have a nice day, Best Markus