The god himself

I'll eat one of your shoes 🤣🤣🤣

225 hp is my guess.... we shall see lol.

So between the low compression, leaky diff's and busted crankshaft on that old puppy, he'll need about 750 crank to get 300 wheel? LMAO

Do you have salt?

SHUSH

@@HooviesGarage 😂

camera mic tend to not pick of the true sound experience.. so IRL it could be very different..

@@ToolkiT73UK It's under the windshield too, it certainly doesn't help.

@@PuerRidcully the engine is in the back big mans

If you're not a novice, you can take 348 engine out in about 4 hours in your garage with no lift!

@@February54 tell me more, why is it so easy, how without a lift?!

@@February54 when a normal car takes 4 minutes to replace belts.. Lol

It's 12 bolts (or close) to drop the entire cradle....

The 360 is the way to go

Yes but the seats, why even bother

It's the Zach Morris mobile Hoovie needs a huge cellphone to match the seats.

Graham Wilson The seats look sporty but the pattern takes me back to many bus rides on interstate coach buses. As long as he likes the pattern but if it was me I would have gotten some nice new leather.

Do you really need attention so bad that you have to change the text...

Sounds like junk. Probably robbed him of 20 hp.

In Outrun the car you use is a Ferrari Testarossa

I think he ment the soundtrack from "outrun" was playing when he drove into the dyno garage.

@@chadthunderstroke Nah that song's not from outrun. Its a generic song that Hoovie got licensed for his channel. It sounds like it could totally be from outrun though and I really dig it.

The seats look like they were made with a.c. slaters shirt Very 90's.

@@vikingman4614 those are actually fabrics you can buy for charter buses, I'm planning to reupholster my z32 seats and put that fabric in

Koome Jaden it’s ‘Capristo’ buddy.

@@simonweston33 Crapisto?

Julio Medina 😡

Julio Medina I was tempted...

Koome Jaden His engine would need to redline at 16,000 RPM to sound like F1. It sounds like racecar from the 1960's though 👍

Sebastián Pagura agreed! A simple compound and buffing would go a long way.

Tyler said the paint job is quite poor

looks like it's been touched alot/beat by an automatic car wash , a really good hand wash and maybe some buffing would do wonders

Just some ceramic coating from the new sponsor and it will be good as new.

Yep do a colab with AMMO!!

Especially not with any features.

Certainly nobody named Doug, of coarse

@@Mathis218337 THHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHIIIIIIIIIIIIIIIISSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS

Doug DeMuro would like to know your location

*cough cough* Doug Demuro *cough cough*

I agree, I think it’s just the rear lined tail lights, and the front have pop ups. Also I think the wheels are yuck. But the body is nice.

gavin P wheel look nice for this oldschool design. Just the wrong color.

Agreed, I love them.

I agree. It's a great looking car. I think the "modern" ones with all their vents and grills and scoops are way overdone. Although the superfast is sex on wheels.

The cheese grater era was controversial back then, as it is now.

@@MAGGOT_VOMIT "Wouldn't that be sweet." No. It'd be downright sad. It's the kind of thing that would make me and my fellow curmudgeons go "That boy ain't right."

@@MAGGOT_VOMIT Install a fake tailpipe with a speaker inside.. 🔊

VZZZZZZZZZZZZZZ!!!!

Tesla Owner: "LOLGAS"

MAGGOT VOMIT gonna have to tune the shifts based on timing, since Tesla doesn’t have gears lol

So good it almost makes up for those seats.

@@davidgalinat4257 I know, and to think he actually paid to have those 'bus seat' inserts put in instead of leaving them black defies logic!

Well, one could argue once you roll the dice buying a Ferrari with 100k miles logic has ready left the building. Damn it sounds the business

Sounds badass

I still find it a beautiful car, don't care per se that its a Ferrari but its an extra attribute most certainly. A lot of cars from that time are awesome tho.

Not all Ferraris are awesome. And this one certainly isn't.

@Kyle D the ferrari mondial is a piece of crap. It is not worth owning, it’s slow, wet, unreliable and horrendous. They are not hated enough in my opinion...

i'm another mondial fan, i just like em :)

People are just performance hungry. Ferrari's used to be amazing GT cars, and it's a shame they've lost that heritage.

Sparkko too loud

James Medina No

Make it so, Mr. Hoovie.

Can not in the Scots dialect is ‘cannae’ pronounced cannay, as in “she cannae make it capt’n”

@@paultaylor701 Plenty of Scots have said that while James Doohan (Scotty) did a lot of good representing Scots on Star Trek... his Scottish accent was terrible. XD

Star Trek : Continues stars Chris Doohan and he's got his fathers unique patois.

Nah ever hear of the Italian tuneup?

Well, in the highly unlikely case something broke and made him fly off the Dyno, it's better to have it on I reckon :P

@TableRocked ...the type of guy to yell at kids to get off his lawn!

Watch a few dyno fails videos and you will understand

Have you ever seen a car come off a dyno?

@@that1guy0219 and don't forget the pesky "you're not wearing your seatbelt" dingdingding

None are naturally aspirated although I do see your point

@@CorkMan776 some are. Even decades ago there were production cars with NA 4 pots close or over this number.

what was his name?

Go talk to a girl dude

@@Akkbar21 Who has more of a problem. 1) a guy who likes DBZ, or 2) a guy who got triggered, by a guy who watches DBZ.... careful, you'll start bleeding more once a month more than I do.. also, many girls like DBZ

Oops it turned into a bonfire

I've never seen Dragon Ball, but know the 'over 9000' meme..

He's a weeb

Probably just carbon deposits being burnt off, just a good ol' italian tune up.

It's precisely the same fabric used in those small and mid size charter buses.

Actually that was dragon ball z

A pinstripe could probably add another 50hp.

They would have to add another 300 for me to consider keeping them! Lol

Well, if those straps let go..... Just search "Dyno fails".

I knew I'd seen them before...

Simeonow that fabric was literally used for reupholstering busses being retrofitted in what's now omega auto clinic lmao

Isn't it the same song from the mud and monster trucks vhs videos in the late 80's and early 90's ?

I’m literally sick of it lmao but hope he never changes it. It’s sooooo hoovie

Full clap

Give it the beans

@sennadasilva11 100% full chat.

Chap means something a lot different...

Would not sell today. Today we need 600hp cars and electronics to never see more than 300hp, because KZfaq.

That drone was HORRIBLE haha

Good eye. Every 348 has this mid range drop. We try to minimize this with chip and other mods. The popular belief is that this is where the crossover intake opens to give greater intake airflow. The engine operates as 2 4 - cylinder engines joined at the crank. At around 4500 rpm, the cross flow valve opens. It's controversial in the 348 community. The 355 has individual throttle bodies so this isn't an issue for it. The 348 is the first Ferrari engine to use this design so it probably took the engineers some time to figure out the quirks. The 360 engine returned to this design of separate banks each with its own throttle body.

Vince Vassallo very interesting. I’m used to seeing dips like this in the Honda community with bad tunes or no tunes in conjunction with less than ideal VTEC engagement RPM. by changing the rpm operation of the intake flap couldn’t you lessen that dip? Or better yet if you could use the 355 ITB set that would fix it as well

@@crxkid16 that is a very interesting comment because a few people have done that swap. But it is not easily done because the 348 and 355 engines are very different above the block. It is also insanely expensive, not to mention violates smog rules in many states. Programming is difficult for two reasons: Ferrari code is proprietary and so far modding it involves trade offs. So far the best fix seems to be adding airflow to the intake and exhaust. The computers adapt so long as the injectors and fuel rail can keep up. I have upgraded both in my car.