Dynojet Yamaha R3 Power Commander V Install

No video

Dynojet Yamaha R3 Power Commander V Install | Sportbike Track Gear

Рет қаралды 44,537

Күн бұрын

Dynojet Yamaha R3 Power Commander V Install
www.sportbiket...
Installing the Power Commander V on the Yamaha R3 gives you control over both fuel and ignition. If you would like to add the Power Commander V Quick Shift Sensor to your R3 no additional modules are required, only the sensor itself and appropriate shift rods needs to be installed with the PCV for clutchless full throttle upshifting. Watch the video and go to our product listing for more information on the Power Commander V.
Sportbike Track Gear is the #1 online eCommerce site for protective motorcycle apparel and performance parts. Buy popular brand name motorcycle helmets, riding gear, tires and parts at SportbikeTrackGear.com today! If you have any further questions call 888.784.4327, send an email to orders@SportbikeTrackGear.com or leave a comment. Don't forget to subscribe!
/ sportbiketrackgear
/ stg_moto
/ stg_moto
blog.sportbike...

Пікірлер: 107

@twobrotherscycleanda 3 жыл бұрын

Dude this is super easy. They did all the splicing and soldering for you. High quality wire probes and all. Great video thanks.

@sportbiketrackgear 3 жыл бұрын

This is not an overly difficult project. You are welcome and thanks for watching! - Van

@chrisriddiford6216 2 жыл бұрын

@@sportbiketrackgear Chris Riddiford 😂 Facebook

@Cruz474 2 жыл бұрын

Awesome video. At first I was totally intimidated, but after a few days of studying my R3 and this video. I am 100% confident in doing this myself.

@sportbiketrackgear 2 жыл бұрын

Happy to hear this was helpful. - Van

@Cabezon76 4 жыл бұрын

i appreciate your attention to detail and meticulous install, I applied that to mine and it works great.

@sportbiketrackgear 3 жыл бұрын

Happy to hear the video was helpful! - Van

@bparker 4 жыл бұрын

Brian, your videos are all very well done . . . love the attention to detail with this installation. It's nice to have the thorough explanation as well!

@sportbiketrackgear 4 жыл бұрын

You are welcome and thank you for watching! - Van

@ZVManning 4 жыл бұрын

Also again good video. I just saw where the ecu is on my r3 when doing the oil change. I just purchased a full Akrop carbon fiber exhaust pretty excited. Didn't but the commander it's out of stock. Just want the juicy sounds. Am excite

@sportbiketrackgear 4 жыл бұрын

Thanks for watching! - Van

@havoc010101 6 жыл бұрын

Once again, great install video! That didn't look to crazy. Brain, I would like to see an install video for the Kawasaki 400! Keep the content coming!!

@xman20427 11 ай бұрын

Awesome video! After install and mods any issues with vapor lock?

@sportbiketrackgear 11 ай бұрын

We did not have any issues at all. Max rode this bike quite a bit before we sold it and loved it. - Van

@xman20427 11 ай бұрын

@@sportbiketrackgear that’s awesome to hear!!! I’m running into an issue of when it’s 110+ outside and the bike will just completely shut off after a few minutes. Can’t pinpoint the issue. Only has 1100 miles. No issues if it’s 90 or less outside. Cooling system is intact. But my buddy was thinking vapor lock issue but I’m not too sure.

@RedTurboMr2 6 жыл бұрын

I'm about to install this on my R6

@jeremyt1117 5 жыл бұрын

Where in the world do I find the O2 optimizer?!?!?...I bought my PC V used and it didn't include this...I've looked everywhere...eBay, Amazon, Google, etc...can't find it...or can I rig one using the old sensor plug?

@sportbiketrackgear 5 жыл бұрын

Do you have the same year, make and model bike shown in this install? - Van

@minhdangoz94 6 жыл бұрын

Please do it on Ninja 400 as well

@sportbiketrackgear 6 жыл бұрын

We are working on that one now, will be up soon. - Van

@minhdangoz94 6 жыл бұрын

That's so cool! Love and appreciate ♥

@emudshit 6 жыл бұрын

hey mate just wondering, im about to flash the ecu myself but seem the only way to do so is to remove all fairings and fuel tank to get to the ECU is this true or am i doing something wrong?

@minhdangoz94 6 жыл бұрын

You want to tune the PCV or flash the stock ECU? Just put the PCV somewhere easy to connect, passenger seat to rider seat are best.

@iLykeCahrs 6 жыл бұрын

Glad to hear that! I ordered a PCV, 'H' shift rod and a push/pull quick shift sensor for my 400 from y'all this morning.

@freeballin0073 6 жыл бұрын

On the 7:40, I see the factory sticker printing that says “made in indonesia” or “manufactured by PT. Yamaha Motor Indonesia”. Does that go for the R3 bike’s frame/chasis only?? or the whole Yamaha R3 motorcycles that are sold in the US are of the Yamaha Indonesia product parts and assembling? ..Just my curiosity since we do not have the R3 available for sale here in Indonesia, instead we have the “Yamaha R25”...which looks exactly the same with the R3 but only with a slight smaller engine displacement (250cc- while the R3 has 340cc displacement)

@AS-up7cw 7 ай бұрын

EL MAPA Yoshimura R77 full exhaust system Stock air filter se la puedo poner a una mt03 2021? ya que en este año no encontre con full sistem, y el motor sigue siendo el mismo de la R3 2015 a la fecha con las de la mt03, o habrá problema de configuración?

@sportbiketrackgear 6 ай бұрын

No hablo

@martinpaez3439 2 жыл бұрын

Hello, if I wanted to connect it to a single-cylinder engine, I only have to connect it to ONLY ONE COIL OF THE ENGINE, RIGHT, OR AM I WRONG?

@sportbiketrackgear 2 жыл бұрын

These are 100% model specific and will only work for the bike they are designed for. - Van

@AS-up7cw 7 ай бұрын

al poner un full system y el power comander no hay riesgo de dañar nada del motor? es igual que reprogramar la ECU?

@sportbiketrackgear 6 ай бұрын

No hablo

@JamieS1992 6 жыл бұрын

wow I been waiting for this video for years now lol I have had one installed on mine for awhile also I found the shifter makes me miss shift alot

@JamieS1992 6 жыл бұрын

this bike is gonna be so much better with a tune also when I went in for a tune I had one of those maps on it from the website and I got 4hp more with a tune and on an R3 I liked that

@sportbiketrackgear 6 жыл бұрын

Is your tune for pump gas? I assume you have a full system on the bike now. With the map I used my Son Max was able to hit 108.8 mph (GPS timer) on the straight at Grattan here in Michigan. I compared this to another rider on a built R3 race bike with mapping etc... and Max was getting 6 mph more on the straight. To be fair there is a weight difference of 30 - 40 lbs with Max being lighter. If our R3 is 4 hp lower than it could be that would be a welcome change for sure. Will need to look into getting the bike mapped later this year. - Van

@JamieS1992 6 жыл бұрын

yeah its pump gas I use 98 but I think over in the US my 98 is not the same, I don't have a full system I am using a M4 street slayer which I had shipped to Australia from you guys, on the map from the site I hit 175kph but after the tune my new max speed is 187kph (116) max would smash my speed with my weight but this speed is from the speedo but I do still have stock teeth and tire size i have been wanting a speedo healer

@AS-up7cw 6 ай бұрын

Is it necessary to remove the oxygen sensor? My power Comander V does not come with the O2 oxygen optimizer, can I use it by connecting the stock one or do I disconnect it?

@sportbiketrackgear 6 ай бұрын

Everything has changed with the latest Power Commander 6. No more removing the O2. - Van

@AS-up7cw 6 ай бұрын

@@sportbiketrackgear

@mhsucio6830 4 жыл бұрын

Please make a video installing a PCV on a 2018 or whatever year similar for an R6 for my stupid ass please !

@sportbiketrackgear 4 жыл бұрын

Sorry we do not have an R6 project bike at this time. - Van

@mhsucio6830 4 жыл бұрын

@@sportbiketrackgear Would you say this video is good enough to reference? I am not as stupid as I stated, But I only trust your videos.

@AS-up7cw 7 ай бұрын

Es necesario eliminar el sensor de oxigeno? mi power Comander V no trae el optimizador de O2 oxigeno, puedo utilizarlo conectando el de stock o la desconecto?

@sportbiketrackgear 6 ай бұрын

No hablo

@outdoorz_dan 5 жыл бұрын

I'm getting the pcv for my 2019 r3 however the only map they have is for stock can I safely run a 2018 map for full exhaust

@lastofadyingbreed4520 3 жыл бұрын

Hi Sir Van, do you guys have delivery in London? Thank you

@sportbiketrackgear 3 жыл бұрын

We ship internationally using USPS or DHL. To get a quote add the items you are interested in to the cart on the site along with your shipping details and the site will get you a quote. - Van

@kayz08 2 жыл бұрын

Is this compatible with yamaha r25 2015. Nice video keep uploading.

@sportbiketrackgear 2 жыл бұрын

I do not believe this will be compatible with that model. - Van

@michaelsantos-kc4yw 3 жыл бұрын

So, I just installed the PCV on my 2020 r3. There is only 3 maps listed that does not have the Full Akropovic exhaust and a K&N filter. It lists for a Leo full exhaust and stock filter for 2019. Can we use any of the years prior to 2019 Maps…or would this be a question for Dynojet? Appreciate any advice! Thanks for posting all your different vids!

@sportbiketrackgear 3 жыл бұрын

To be safe I would ask the folks at Dynojet this question. I would use the map that is closest to your set up available from Dynojet for this PCV. - Van

@petechka6931 3 жыл бұрын

i just received my pcv from stg and it didn't include the o2 optimizer should i be reusing the stock o2 sensor ? i was hoping to eliminate that

@sportbiketrackgear 3 жыл бұрын

Yes just reuse the O2. A lot of time has passed, perhaps Dynojet has changed the kit. This video is for the 15-18 only. - Van

@SkyProStudio 5 жыл бұрын

please do for R6 2017 thank you brain

@sportbiketrackgear 5 жыл бұрын

Sorry we do not have a 17 R6 here any longer. This video should be a pretty decent guide as to what the project entails. - Van

@pututadhikomarakertadikara454 4 жыл бұрын

When install autotune dyno jet

@sportbiketrackgear 4 жыл бұрын

We will not be using the autotune on this bike. - Van

@fuses11atc 5 жыл бұрын

Is the pcv install the same as the pc fc??

@hexx-otrips1798 2 жыл бұрын

question: i would like to install velocity stacks, air filter cover and filter, also smog block off plate, and full system SC project on my yzf track bike.. can use this too? or i can only use the ECU flash for it??

@sportbiketrackgear 2 жыл бұрын

You can get the tuning you will need done with the PCV or by tuning the ecu. - Van

@Timeowl 5 жыл бұрын

Do you need a power commander for a 2019 R3 m4 slip on exhaust install?

@sportbiketrackgear 5 жыл бұрын

You do not have to install a fuel controller with that system if you prefer not to. We rode our STG R3 for quite a while with the M4 system on it before installing the fuel controller and had zero issues. If you want to get the maximum performance from the bike you will need to flash the ecu or install a fuel controller at some point. - Van

@Timeowl 5 жыл бұрын

Sportbike Track Gear thank you so much for responding. I just ordered my m4 street slayer exhaust from you guys. I can’t wait for it to arrive. Great videos and again thank you for responding. I have been trying to figure out what I need. Have a great day. Keep up the great job with your very informative videos.

@R3Elle 4 жыл бұрын

Hi, how do you know if the map has successfully transferred or loaded onto the bike? I noticed on your video prior to your hitting the send map button in the map notes section, it already indicates the yoshimura exhaust info and air filter info. I just don’t see any verification indicator of some sort of the map being transferred over to the bike on the video. My apologies as i am new to this pcv device and i’m trying to understand it prior to making a purchase. Thank you

@sportbiketrackgear 4 жыл бұрын

Connect the lap top to the bike and view the file currently in the PCV. It will show the title of the file that is currently in the PCV. - Van

@joelquinn8583 Жыл бұрын

I know im massively late to this party but ive just intalled this on my r3 and have realised i dont have an 02 optimizer. Does this mean i just leave the stock 02 sensor in?

@sportbiketrackgear Жыл бұрын

It has been quite some time since we did this install and this product is discontinued now. I would shoot Dynojet an email with this question. - Van

@joelquinn8583 Жыл бұрын

@sportbiketrackgear haha yeah I've definitely gone a bit retro now. I've even gone and got the yosh r77 as well, which I also learned has been discontinued. Thanks for the tip Van I will send them a message

@markanthonybaldovino9945 4 жыл бұрын

Hi there i just installed the pcv from stg to my 2020 yamaha r3 , every thing is ok on the software no errors when plugged into my laptop , but once i start the engine i get device error blinking red on the software and also on the pcv module the status light blinking red . I checked the error on the software and it comes up with error code 2303 VR Module signal unsync'd , any help would be good , Cheers P.s my pcv didn't come with o2 optimizer Dynojet said to leave the stock o2 plugged in

@sportbiketrackgear 3 жыл бұрын

For this level of product support you will need to reach out to Dynojet directly. Sorry for the slow response here, we were traveling for Max's MotoAmerica debut. - Van

@Rohit-qt2ve 6 жыл бұрын

Please, can you do this on a Z900? Is it necessary that we need to do dyno after installing this? uploading a profile wont be wnough?

@gearmeout4666 4 жыл бұрын

Will the process at the end w/ hooking it up to the computer be compatible w/ the m4 cat delete slip on and k&n air filter?

@sportbiketrackgear 4 жыл бұрын

I would suggest reviewing the maps they have available and selecting the one that gets you closest to the performance parts you have on the bike. Look for a full system and air filter map. End of the day there will typically be very little notable difference between one of these maps and a full dyno tune. Sure there are exceptions to this rule, but it holds true for the most part. - Van

@jeremyleach6424 3 жыл бұрын

I have pcv with autotune with m4 full exhaust system on a ninja 400 2021, my question is what’s a good afr with these mods?

@sportbiketrackgear 2 жыл бұрын

We have seen 12.9 to 13.2 at 100%. The autotune is a feature that I have not used to date and do not plan to use. - Van

@andresh77 4 жыл бұрын

Hi, I have a yamaha R3 (year 2016) with exhaust stock, can a PCV improve engine performance if I maintain the stocK configuration?, thanks

@sportbiketrackgear 4 жыл бұрын

Not necessary with the stock exhaust at all IMO. - Van

@jasonanwar2510 3 жыл бұрын

hi i got a question, can i just unplug my o2 sensor without installing PCV module?

@sportbiketrackgear 3 жыл бұрын

If you are running only the OEM electronics you should leave it plugged in. - Van

@jasonanwar2510 3 жыл бұрын

i got a full exhaust M4 system. it comes with single channel plug, while my bike uses a dual channel o2 sensor plug, So i couldn't plug in the o2 sensor

@ectornkarinaa 6 жыл бұрын

Is it necessary to unplug and remove the 02 sensor or can it stay in there?

@sportbiketrackgear 6 жыл бұрын

You can just leave it in the pipe if you want to. This will not cause any sort of problem if you do not have a plug to replace the sensor when you remove it. - Van

@gearmeout4666 4 жыл бұрын

Do I have to leave the bike powered on during the whole computer mapping part? Didn’t really know how to word it.

@sportbiketrackgear 4 жыл бұрын

The bike needs to be powered up when updating the Power Commander. - Van

@gearmeout4666 4 жыл бұрын

Sportbike Track Gear ONE LAST question. After the install of the pcv, m4 street slayer & k&n filter should I use a higher octane gas or still use factory recommended unleaded? Thanks !

@sportbiketrackgear 4 жыл бұрын

@@gearmeout4666 Negative, use the same fuel you would before making the mods. You would only need to do that if you increase compression or mess with the cam timing. - Van

@gearmeout4666 4 жыл бұрын

My pcv didn’t come w/ a o2 optimizer & I cant seem to find one online. Any ideas where I can find it online? & is it ok to go ahead and unplug the o2 sensor ? I know it’ll throw a code until I can get the optimizer .

@sportbiketrackgear 4 жыл бұрын

Do you have the exact same model as shown in the video? Not every PCV comes with an O2 optimizer. - Van

@gearmeout4666 4 жыл бұрын

Sportbike Track Gear i talked to dyno jet, supposedly they no longer do the o2 optimizer w/ modern bikes. Thanks anyways!

@galopegagorginho 5 жыл бұрын

which dynojet model of the right Yamaha yzf R3? please!

@jbamrah1 4 жыл бұрын

What’s before and after wheel HP or 0-60 change Thankyou. Also cost for the power module

@sportbiketrackgear 4 жыл бұрын

Sorry we do not measure any of that. The main reason for installing the Power Commander on the R3 was to get the quick shifter on the bike. This item sells for around $350. - Van

@Rickyclark 2 жыл бұрын

Hey, a few months ago I purchased from you guys the m4 street slayer slip on exhaust for my 2020 r3. Now to install I had to cut the cat off, now would that be considered a full system? And also would I need to get it tuned? Thanks

@sportbiketrackgear 2 жыл бұрын

Thanks for the order! You do not have to tune the bike or install a fuel controller with that system. If you are happy with the way the bike performs no need to make any changes. - Van

@Rickyclark 2 жыл бұрын

@@sportbiketrackgear Ok great, thanks Van.

@dantebulac6680 5 жыл бұрын

Is this compatible to all yamaha r3 models?

@sportbiketrackgear 5 жыл бұрын

We include the fitment for the product in the title. This one fits the 2015-2018 Yamaha R3 ABS etc... - Van

@matteosivilotti9800 6 жыл бұрын

Hi Brian, have you done the autotune video yet?

@sportbiketrackgear 6 жыл бұрын

No we have not installed the Autotune on this bike yet. - Van

@matteosivilotti9800 6 жыл бұрын

ok, i was just interested to see how you would re-route the new O2 sensor located on the back of the Yosh R77, kind of a odd spot... the connector has a plastic clip that seems to fit on one of the chassis hole. And i dont think i could have re-routed it on the 12mm original location because the cable would bend too much.