DYSON V11 vacuum cleaner handle replacement accessories disassembly video

No video

DYSON V11 vacuum cleaner handle replacement accessories disassembly video

Рет қаралды 134,462

Күн бұрын

If you need to replace the handle parts of the this V11 same vacuum cleaner ，please refer to our video.If you have requirements for the accessories of this vacuum cleaner handle , please refer to the following link to purchase the accessories you need.
Bin: www.ebay.com/i...
Filter: www.ebay.com/i...
Cyclone : www.ebay.com/i...
motherboard & motor: www.ebay.com/i...
V11 Switch assembly part: www.ebay.com.h...
New V11 Switch assembly part: www.ebay.com/i...
motherboard & motor assembly (LCD version): www.ebay.com/i...
Outer casing of motherboard & motor: www.ebay.com/i...
screwdriver: www.ebay.com/i...
www.ebay.com/i...
Power trigger switch button：www.ebay.com/i...

Пікірлер: 63

@StupidUsername298 2 жыл бұрын

Thanks to you I managed to take apart mine and figure out that there was rust and calcium on the power connection to the board. Cleaned it off and saved me me from dropping $100 on a new motor. Thank you sir.

@pascalgodefroy8390 2 жыл бұрын

Merci trop cool j’ai mon Dyson marche après le remplacement du l’interrupteur 😃😃😃

@MichelRuiz 2 жыл бұрын

Amazing video with no words but only the good way to reach the replacement of this nasty part 👏😊, many thancks from France

@talren 2 жыл бұрын

Thanks for the video, I was able to successfully repair my V11 with broken trigger in under 40min and a 10€ replacement trigger from Amazon. Saved 550€ today !

@Sebastienolivares-iu4pi Жыл бұрын

Merci beaucoup pour cette vidéo, grace à vous j'ai pu réparer mon Dyson!!

@mickaelcorreia5175 8 ай бұрын

Merci pour ta vidéo grâce a toi jai réussi a réparer mon aspirateur ça ma permis d'économiser un bon billet

@cristibedreaga3555 Ай бұрын

Merci c est top

@marriott18 7 ай бұрын

top quality

@zohraholly2 Жыл бұрын

Merci grâce à vous j'ai réussi à réparer mon dyson super vidéo avec des explications de démontage et surtout le remontage encore bravo.

@kandredfpv 2 жыл бұрын

Briiliant, thanks so much for posting this disassembly. I got as far as @1:16 on my own, and I had a suspicion the seal had to come off but I wasn't sure enough to proceed without forcefully breaking something. Looks like I have a broken trigger :(

@zerosleep105 2 жыл бұрын

Richtig gutes Video thanks a lot

@MdF-13 Жыл бұрын

Brilliant Only with your help, I could arrive resolving this affair ! THANK YOU SO MUCH = Mario

@sarcastictechno8004 Жыл бұрын

Useful video, thanks!

@hinddouiri1504 Жыл бұрын

Merci pour cette video pas à pas pour démonter et surtout remonter le dyson V11 , jai commandé le tournevis soecial et la gachette puis suivi vos explications cetait tres clair, je ne remercie pas la marque pour la mauvaise qualité de la piece qui s’est cassée juste après la fin de garantie il parait que c’est une panne fréquente!

@reghiurs6896 2 жыл бұрын

Merci, merci génial !!!! Super vidéo!!!!

@DjNiloRm Жыл бұрын

Bravo!!! M hai salvato!!

@ispearo 2 жыл бұрын

Great vid..But No need to remove other power lead from circuit as he shows him lifting up black part to remove thin wire strip. Leave that be it does not need to be removed.

@richardsykes7971 2 жыл бұрын

Thank you!

@tinomachado4001 3 жыл бұрын

Merci beaucoup pour cette super vidéo 👍

@zhwzhang 3 жыл бұрын

Thank you for your comments. I'm glad to help you

@arxx9999 Жыл бұрын

Nice very useful

@gruffhunter 2 жыл бұрын

Благодарю за подробный разбор 💪

@jomiro 2 жыл бұрын

Very good tutorial, thank you.

@bigoulon Жыл бұрын

Thank you for sharing it was very useful to me. Note that on some devices (mine) the green component plate under the white cover is completely embedded in a layer of insulating rubber which requires cutting out the areas to be dismantled and disconnected.

@stefanomantero9270 2 жыл бұрын

Ty so much! 😉

@jjp2628 2 жыл бұрын

Me ha sido muy útil para reparar el gatillo de reemplazandolo. Se necesita un destornillador de estrella PZ1 y otro de punta Torx T8.

@zhwzhang 2 жыл бұрын

Hello, here is the link which you could order the Screwdriver to repair the vacuum cleaner :www.ebay.com/itm/265035870581

@Bogmire509 3 жыл бұрын

For some reason after I take off the motherboard part there is a screw under some kind of epoxy that I am pretty sure it’s preventing me from removing the handle completely. Any suggestions would be awesome.

@OrryMainOthello Жыл бұрын

Hello, great instructions, mine runs again only with the problem after assembly that I can no longer switch the mode to Eco or Boost, does anyone have any idea what the problem is....Thank youeeeeeee

@thomasb7337 3 жыл бұрын

Thanks a lot for your video. I changed my button and it works again. But now my screen doesnt work anymore. Have you any idea ? The Dyson works but i cant change mode or see the charge.

@hasrinngadenin4812 2 жыл бұрын

@Wayne Halliday do you work as a technician dyson?

@nuburinet 2 жыл бұрын

최고의 v11 분해 영상

@thelightskin 3 жыл бұрын

Any idea how to take out the trigger assembly for the v11 sv15 model. It’s the vq1 absolute but now they come with replaceable batteries so i judging from your video I presume the assembly is different plastic housing / assembly. Any help suggestions?

@sihemkhalfet1851 2 жыл бұрын

Quelle tournevis avez-vous utilisé ? Merci pour la vidéo

@thiruganesandhanendraraj1413 2 жыл бұрын

Thank you for the videos, I have V11, completely dead, when I plugged in the charger both side blue lights comes up for 5 second and goes off, when I pressed the battery black switch, it flashes 9 times. I have opened the battery and tested all the cells showing 4.11V, The signal plug showing constant 26V, the clips which connects the main body read 26V once and goes off, when I pressed the black battery button. What you reckon, need a battery or any other parts, I repair and learn electronics, good to see that you sell parts, I would get back to you for V6 parts. Thanks

@zhwzhang 2 жыл бұрын

Hello, had you repaired your V11 Vacuum Cleaner?

@thiruganesandhanendraraj1413 2 жыл бұрын

Thank you for the reply, my work is bit busy and tomorrow, plan to dismantle the machine and check the cct board. Before that just wanted to know, the battery constantly supply the voltage, when I pressed the black button, it comes around 26 V and goes off while keep pressing the button, do you also work work with Dyson fans. X'mas

@davorz Жыл бұрын

Nice video. But those "special screwdrivers for dyson" that you put on ebay...c'mon man, they're just Torx8 screwdrivers.

@natashax9542 3 жыл бұрын

What type of screwdriver you used ??

@zhwzhang 3 жыл бұрын

This screw driver is customized by us，with magnetic and easy to pick up screws，fit for Dyson V6/V7/V8/V10/V11 vacuum cleaner disassemble,If you need,you could clik link for more details: www.ebay.com/itm/264996088143

@jjseandxcefree 2 жыл бұрын

does the v10 front canister dustbin fit on the v11? the clear plastic thingy that opens and allows you to empty?

@zhwzhang 2 жыл бұрын

v10 front canister dustbin can't fit on the v11.

@diegogavani2583 2 жыл бұрын

Hi thank you for your interesting video! Could you help me? I got a used Dyson V11 Absolute without battery. I connected the + and - inside the handle and the lcd behind the filter lights up a little bit but the dyson doesn't work...I noticed there are two more circular pins inside the handle but i don't know what they are (additional power, button, etc) i even tried to find a diagram but i didn't got anything, do you know what they are or can you tell me where i have to connect them? I'm really desperate and i don't want to spend extra money for a new battery...thank you very much!

@zhwzhang 2 жыл бұрын

when you see this two circular pins at the time point in the video?i will check for you.

@diegogavani2583 2 жыл бұрын

@@zhwzhang thank you

@julialam25 3 жыл бұрын

I cleaned my filter and tried to use it when it was still little wet and stopped working. It turned off completely. Bought a new vacuum head without battery and is not working either. Was I supposed to buy a new battery as well. Kindly advise .

@zhwzhang 3 жыл бұрын

do you mean that you bought a new body handle without battery but still not working?if yes, is the mainboard and the motor part was damage.

@julier643 Жыл бұрын

Bonjour nous avons dû faire une erreur l’écran ne marche plus, on voit une petite lumière en fond mais il n’y a rien sur l’écran et pas d’aspiration … savez vous d’où peut venir le problème ? Peut être avons nous endommagé un fil ?

@Ecksterphono Жыл бұрын

The weakest point in those Dysons is the trigger. Had to replace 3 already

@josephpaycana 2 жыл бұрын

Hi! I followed this and changed broken trigger on my v11. however now when i put the battery in, it turns on and doesnt stop. What could i have done wrong? :(

@zhwzhang 2 жыл бұрын

It may not be properly installed, you can remove and try to reinstall.

@melissabellezza4766 3 жыл бұрын

Hey my trigger broke as well where do I get a replacement since I don't see one offered on dysons website, please let me know thanks

@zhwzhang 3 жыл бұрын

HELLO, could you tell me more details about the part you need?or you could have a check my video details, i list some parts purchase links,thank you.

@ivanodimauro9836 2 жыл бұрын

Ciao. Vorrei sapere il numero della chiave Torx che hai usato x smontare il pannello bianco che copre la scheda madre. È una numero 2? Grazie

@zhwzhang 2 жыл бұрын

Hello, thank you for your question. Here is the Screwdriver we used in this video: www.ebay.com/itm/265035870581

@Biageziopx 2 жыл бұрын

@waqasahmed939 3 жыл бұрын

Had to slow the video down just to see what you're doing

@nirviq1 2 жыл бұрын

I lost my faith in Mr. Dyson after buying this machine.

@cjbarnes2010 Жыл бұрын

Same

@beccauva 2 жыл бұрын

This video is helpless... The electronic board is protected with a sylicone layer and disconnecting the motor part is almost impossible without damaging the contacts

@beccauva 2 жыл бұрын

I confirm that dismounting two different v11 motors, in one the electronic board is covered with sylicone, the other not. This is simply for impeding auto-maintenance!

@ampunkt1155 2 жыл бұрын

I do not understand at all why you are making a video and not pointing out gross mistakes! When installing the trigger again, you should definitely pay attention to the screw above! In addition, when you reconnect the filter to the engine, you should be careful not to destroy the two contacts on the engine or to bend the contacts in the filter! Your video is out of the question!