e203: Rally Legends Fiat 131 Front Grille and Lamp Upgrade
Рет қаралды 3,329
5 жыл бұрынThank you for watching my video!
Links to the products featured in this video are below:
131001-01 Rally Legends Fiat 131 Grill
shpws.me/R9vr
131001-02 Rally Legends Fiat 131 Lens Set
shpws.me/R9vs
131002-01 Rally Legends Fiat 131 Aux Lamp
shpws.me/R9uk
All Ampro products can be found here:
Shapeways: www.shapeways.com/shops/ampro
Please, visit my sites:
Facebook: / amproengineering
Instagram: / amproengineering
Many of my designs and threads can be located at
www.tamiyaclub.com/forum/index...
If you enjoy the music featured on my videos, please visit Blue Pinto’s official site here:
/ bluepinto
www.reverbnation.com/bluepinto
I always enjoy constructive criticism and would love to know what you think about my designs.
Please subscribe as I have hundreds of other upgrades for many, many other cars, rc cars, toys, and anything else that I think needs upgrading!
**I have no tolerance for disrespectful posts, foul language, cyber-bullying, sexism, homophobia, racism and anything else that has no place in society. This is a family friendly channel so I have soap next to me for every time I say a bad word. Any foul or abusive post will be removed and you will be reported to KZfaq.**
@Alamander81 5 жыл бұрын
These videos spark joy. I may jump on one of those rally legends
@AMPROEngineering 5 жыл бұрын
Haha, thanks Alessandro!
@NordicRC 5 жыл бұрын
Looks amazing my friend! Love the combo of the yellow/white.
@AMPROEngineering 5 жыл бұрын
I am a huge fan of that look! Thanks
@mikeymike3240 5 жыл бұрын
That looks amazing, it came together very nicely.
@AMPROEngineering 5 жыл бұрын
Thank you!
@juniorwest4138 5 жыл бұрын
Brother that looks super clean 👍
@AMPROEngineering 5 жыл бұрын
I appreciate that Junior.
@YYCRCFabricationz 5 жыл бұрын
Sweet looking grille & a wicked body. Nice job Brother, well done!
@AMPROEngineering 5 жыл бұрын
You are too kind!
@kingstonrc329 5 жыл бұрын
Wow... Really nice man!!! Looks amazing!!! 👌🏻😉👍🏻
@AMPROEngineering 5 жыл бұрын
I appreciate that.
@pinomuraca5615 5 жыл бұрын
Great Work... Now I need to get one of these !
@AMPROEngineering 5 жыл бұрын
Its a good little car. The chassis isnt bad.
@ohsweetnothing 5 жыл бұрын
This is one of my all time favorite rally cars.
@AMPROEngineering 5 жыл бұрын
Mine too.
@stevefield3377 5 жыл бұрын
Again, you did some masterpiece.
@AMPROEngineering 5 жыл бұрын
Thanks Steve, that is very nice of you to say.
@sm0keu 5 жыл бұрын
Awesome job looks amazing 👍🏽
@AMPROEngineering 5 жыл бұрын
Thank you! You are too kind.
@mfathi007 5 жыл бұрын
Awesome videos! Keep it up.
@AMPROEngineering 5 жыл бұрын
Thank you!
@gottfriedrc 5 жыл бұрын
Wow. Nice job!
@AMPROEngineering 5 жыл бұрын
Thank you!
@jakewang243 5 жыл бұрын
好棒啊，最喜欢看这个了
@AMPROEngineering 5 жыл бұрын
谢谢！
@maxrc8364 5 жыл бұрын
Awesome light mod!
@AMPROEngineering 5 жыл бұрын
Thanks!
@seansrcconstruction 5 жыл бұрын
Pretty awesome looking car
@AMPROEngineering 5 жыл бұрын
It is a neat looking car. I wish Tamiya would make one of these shells.
@operation11charlieinc 5 жыл бұрын
Awesome brother
@AMPROEngineering 4 жыл бұрын
Thanks!
@ss9c1 5 жыл бұрын
Bellissima!
@AMPROEngineering 5 жыл бұрын
Grazie Mille!
@steveclough6794 5 жыл бұрын
you make everything look easy Alberto, a true pro :-o
@AMPROEngineering 5 жыл бұрын
Its not too hard! I like easy!
@steveclough6794 5 жыл бұрын
@@AMPROEngineering hi alberto can you help this guy ,, Highlighted reply RC Retro 8 hours ago Hey guys, thanks for the suggestions. I will try to reach out to AMPRO and plead my case for help lol....Thanks again
@AMPROEngineering 5 жыл бұрын
I cant seem to find the question he was having.
@steveclough6794 5 жыл бұрын
@@AMPROEngineering Alberto I will post you the link as soon as I get back to my desktop thanks
@steveclough6794 5 жыл бұрын
@@AMPROEngineering Alberto it is this car he is having problem .. kzfaq.info/get/bejne/rp5jqLeivpapj40.html
@ShenRC 5 жыл бұрын
😁👍looks awesome!
@AMPROEngineering 5 жыл бұрын
Thanks buddy! Hey I used all the grips you send me! I love them and need to order more from you!
@ShenRC 5 жыл бұрын
@@AMPROEngineering Yea I only have black ones left, I only make them myself once a year maybe 2 times...waiting for the hot weather to come so I can make another new batch of em!
@AMPROEngineering 5 жыл бұрын
No problem! I like bright colors so keep me posted.
@jamesswift4641 5 жыл бұрын
The grill and light setup is sweet,really adds some punch to the car, I wonder if you know were I can get a Tamyia stadium truck body,love the show
@AMPROEngineering 5 жыл бұрын
Thanks James. I would look on eBay and check out the seller TeamBlueGroove. I use dozens of his re-pops
@jamesswift4641 5 жыл бұрын
@@AMPROEngineering thank you,I will
@freddyubiera4304 2 жыл бұрын
Hey I know this video is older but I just picked up a body and will be doing this upgrade. I also noticed that you have a different set of wheels on this car. Can you please provide any or more info on them as I'm in love with the way they look and have not seen them around! Thank you great videos. love your work!
@AMPROEngineering 2 жыл бұрын
Oh sure! I made those also for mine. I can add them under this cars section on shapeways. There is a main wheel (nylon) and a hub cap (high detail). You paint the wheel in matte black and then center in gold (or whatever you want). the front and rear offsets are different.
@freddyubiera4304 2 жыл бұрын
Sweet I would love that! Thank you so much.@@AMPROEngineering
@jarek.o2663 5 жыл бұрын
Great video!! What light controller you use?
@AMPROEngineering 5 жыл бұрын
Well, on this car I think it is the one in my 6th installment of my LED controller review series. Check those out as I cover tons of these units.
@donovangladden9074 5 жыл бұрын
Great product! I really like that body, it has great detail. I have a question for you- have you ever experimented with cold Acetone vapor smoothing of any ABS printed parts? If so, what was your results? Thanks for the awesome videos😁
@AMPROEngineering 5 жыл бұрын
I have heard of that but I do not print in FDM right now. I am not a fan of how they come out. Thank you again!
@thyristor419 4 жыл бұрын
Hi, are there lenses in the aux lamp kit? Congratulations on the modification to' the 131 Abarth rally ! I'm an Italian 131 Abarth fan!
@AMPROEngineering 4 жыл бұрын
Yes there are! The links in the video description have the lenses as well as the housings and grill. I am a huge Fiat fan. I own seven and used to own a Brava. In the US They rename the 131 to brava in 1979. Sadly my car was complete junk so the 2.0 liter Engine was removed, fully rebuilt and put into my 124
@thyristor419 4 жыл бұрын
Thank you,i will probably order the kit,my father as a youg man representative as a job and he had three fiat 124 1.3 liter) he did many kilometers around Italy
@freddyubiera4304 Жыл бұрын
Hello there. Some time ago I asked about the wheelset for this car. I was waiting for you to upload and I never found it. If you did get a chance to would you be kind enough to help me find them. I would even try the STL file as I was gifted a 3d printer. I've been searching for that wheel in 1:10 I can't seen to find it. Any help with this will be appreciated. I picked up this grill set, Lenses and light buckets since we last message great work!
@AMPROEngineering Жыл бұрын
OH man im sorry. These are really detailed but the main wheel may work on an FDM but there is no way the center section would. That would need to be SLA at minimum, Polyjet (what you see on mine) is recommended. Let me get these up tonight on Shapeways. Shoot me an email at amproengineering@gmail.com
@AsurasWrath164 4 жыл бұрын
Oh man, I really would like to pick up especially the 131 Abarth and treat it with your 3d-printed parts. But unfortunately I can only find them for over 300€ which is quite a bit too expensive I think.
@AMPROEngineering 3 жыл бұрын
HOLY COW! Yeah that is way too much for this chassis.
@jakewang243 5 жыл бұрын
最近怎么不更新了啊
@AMPROEngineering 5 жыл бұрын
104/5000 我打算早点绕过它然后有一天我开始玩它并决定它需要工作！
@jakewang243 5 жыл бұрын
@@AMPROEngineering somehow the translation didn't work well this time, as a result I didn't get it, LOL
@AMPROEngineering 5 жыл бұрын
Googles tries! I upgraded it since I started to drive it and hated how the front looked. It needed to be fixed asap!
@jakewang243 5 жыл бұрын
@@AMPROEngineering Got It this time ! even google sometimes fails !
@jakewang243 5 жыл бұрын
@@AMPROEngineering hey, mate , No new episodes for weeks, where have you been ?
TAMIYAINC
Рет қаралды 29 М.
ANV RC GRADO viti
Рет қаралды 3,8 М.
Hudson
Рет қаралды 6 МЛН