e235: RC4WD Trailfinder 2 LWB Interior Set and Customization

Рет қаралды 5,946

Күн бұрын

Thank you for watching my video!
Interior Set:
store.rc4wd.com/RC4WD-Mojave-...
Please, visit my sites:
Facebook: / amproengineering
Instagram: / amproengineering
Many of my designs and threads can be located at
www.tamiyaclub.com/forum/index...
If you enjoy the music featured on my videos, please visit Blue Pinto’s official site here:
/ bluepinto
www.reverbnation.com/bluepinto
I always enjoy constructive criticism and would love to know what you think about my designs.
Please subscribe as I have hundreds of other upgrades for many, many other cars, rc cars, toys, and anything else that I think needs upgrading!
**I have no tolerance for disrespectful posts, foul language, cyber-bullying, sexism, homophobia, racism and anything else that has no place in society. This is a family friendly channel so I have soap next to me for every time I say a bad word. Any foul or abusive post will be removed and you will be reported to KZfaq.**

Пікірлер: 53

@gljr323 4 жыл бұрын

I was lucky to have seen this truck in person at the 2019 rc4wd West Coast challenge. What an amazing build 👍

@AMPROEngineering 4 жыл бұрын

Oh thank you! That is very kind. The truck really came out nice!

@motorcityrc6009 Ай бұрын

Actually , it looks like a perimeter lighting feature of the gauge display. It is frigging awesomely done brother!!!!

@AMPROEngineering Ай бұрын

That's a good point, haha! Thank you!

@jamesbassett1484 4 жыл бұрын

I really enjoy your videos and am blown away by your attention to detail. It seems to me that the next level is full depth interiors and would love to see you building them. I was able to move the ESC on my TF2 two door back to one of your electronic bins and have a totally clear floor. I have mocked up a cardboard interior (no stores are open) and am able to get to seven inch action figures in. They have their hair. They have their feet. The driver's hand is touching the gear shift. I cut out the side windows and the passenger has his right arm laying in the window opening. It looks very realistic. My point is that with even minimal skills such as mine, it can be done.

@AMPROEngineering 4 жыл бұрын

The problem with the full depth interiors it takes away from the functionality unfortunately. I have a few full depth interiors and they've made the vehicles utterly horrible to wire and access battery compartments. I am working on a few ideas and chassis to hopefully help

@jamesbassett1484 4 жыл бұрын

@@AMPROEngineering It does seem to me to be the direction the scale side of the hobby is going. The hobby seems to only have begun expecting this recently and the manufacturers don't design with that parameter in mind. To take one example, my RTR TF2 had it's ESC down on the battery tray where an interior would go. I moved it to one of your electronics bins and built an interior. My TF@ LWB kit calls for the shifter servo to be, you guessed it, right in the middle of the floor space. In contrast, the Boom Racing BRX)! places the ultra-mini shifter servo under and behind the battery tray and the ESC under the hood. Imagine that!

@RcDungeon 2 жыл бұрын

Wow I'm glad I found this video absolutely fantastic job!!

@AMPROEngineering 2 жыл бұрын

Thank you so much, I am glad you enjoyed it.

@robertrosson1990 4 жыл бұрын

Good looking truck.nice interior.Really bring everything together.Very nice interior detailing.Thanks for sharing.

@AMPROEngineering 4 жыл бұрын

Any time!

@jamesswift4641 4 жыл бұрын

Looks sweet,even the green outline on the dash looks ok, like a high light👍👍

@AMPROEngineering 4 жыл бұрын

Thanks!

@brsrc759 3 жыл бұрын

Good God that thing is beautiful!

@AMPROEngineering 3 жыл бұрын

Thanks! it was a pain to make!

@skagerstrom 4 жыл бұрын

Amazing work :P

@AMPROEngineering 4 жыл бұрын

Thanks!

@allthethings7226 5 ай бұрын

Very nice video, subscribed

@AMPROEngineering 5 ай бұрын

Thank you!

@ridgerc5976 2 жыл бұрын

I ordered the C2X rtr truck from RC4WD and I'm hoping to be able to disassemble the interior so I can detail it. Yours looks absolutely awesome.

@AMPROEngineering Жыл бұрын

Thank you! It is a cool interior set.

@davidbanaszak562 4 жыл бұрын

your TF2 looks great

@AMPROEngineering 4 жыл бұрын

Thank you! I am really happy with it!

@SwampersRC 4 жыл бұрын

When I built the interior for mine I used the original left drive dashboard which had to be slightly modified. I may take it apart to light the instrument panel.

@AMPROEngineering 4 жыл бұрын

This is a good idea for sure!

@RedLP5000S 4 жыл бұрын

Perfection. In fact, it's Superfection.

@AMPROEngineering 4 жыл бұрын

You are too kind!

@markiootje 4 жыл бұрын

i have found your movies yesterday,i wil look them all next days,i be build tamiya pajero with interior of loops models and wil complete interior total,clear windows and 1 left window half open,also roof window i wil made it do open little piece,i wil learn from your details and use some of it sorry hahahaa

@AMPROEngineering 4 жыл бұрын

Very cool!

@mundodejuegos5461 3 жыл бұрын

Great work dude what glue are you using?

@AMPROEngineering 3 жыл бұрын

I use a model master cement glue. Same one I have used going on 30 years.

@shouryliu2916 4 жыл бұрын

Great truck! now you need a driver I think But I doubt if there's any 1:10 doll detail enough to match such a interor.

@AMPROEngineering 4 жыл бұрын

I bought the Stranger things figures! I think they will work.

@johnthefisherman6586 Жыл бұрын

Mojave dash pad was period correct . More squared rise .

@AMPROEngineering Жыл бұрын

It's close but the 79-83 is much more rounded. I own an '80. Does good enough though.

@lucasc2945 2 жыл бұрын

What's the glue you're using to assemble the parts?

@AMPROEngineering 2 жыл бұрын

Testors model cement. Works pretty well.

@emersonpedro3944 4 жыл бұрын

Show,,,,

@AMPROEngineering 4 жыл бұрын

Show what?

@toddgall5260 4 жыл бұрын

What resistors do you use with the LEDs?????

@AMPROEngineering 4 жыл бұрын

depends on input voltage and resistor color. I have a whole walk through on episode 33

@toddgall5260 4 жыл бұрын

@@AMPROEngineering Very very helpfull THANK YOU!!!

@rcsnapon2132 4 жыл бұрын

Cool lites,bumpers and wheel hubs there the only realistic part of the truck!!! Is it sapost to look like a kids toy ?? FYI cool interior lites

@RedLP5000S 4 жыл бұрын

*supposed

@rcsnapon2132 4 жыл бұрын

K I’m going to try your lite idea good job my friend

@AMPROEngineering 4 жыл бұрын

This is based on the Toyota Yamahauler.

@rcsnapon2132 4 жыл бұрын

Oh k I’m going to check it out and re-watch you’re video

@rcsnapon2132 4 жыл бұрын

Oh wow they make a Toyota hodaka too I pulled up all kinds of info

@scale_nerd356 3 жыл бұрын

I didn’t even get instructions lol

@AMPROEngineering 3 жыл бұрын

OH NO! That sucks! I hope this video helped!

@DeadnCold 4 жыл бұрын

I'm not sure how I feel about you putting together someone else's interior.. It seems wrong somehow.

@AMPROEngineering 4 жыл бұрын

AhahahahH! I felt the same at first but it is pretty good. I dont know that mine would be much better. I mean it would be way better but I have other much more interesting projects planned...haha!