​ Ebay Sales does he have vids on youtube

@@therightnuke Do you mean Does Paul have videos on youtube?

Thanks Pete. And thanks for watching in. Paul seems to be really enjoying the car now. These results of driving pleasure is what motivates us to do what we do,

Brintech Customs yeah i wanna see this M3 get spanked haha

Thanks Krunds keep watching in and we will do our best to keep you guys entertained

You can run either style flywheel. You will need to manually wire in the clutch pedal switch harness, you should be able to use power from the brake switch, and then tap into the can bus for the required signal wiring

Please email us at cars@brintech.com.au our kits are $3100

We are based in Sydney Australia. We can help with parts and programming if required. We have a complete DIY kit. email us for info. cars@brintech.com.au

Evan gelos it's all in the coding. We can do this for you. Send us an email. Cars@brintech.com.au

Pedro P sure can. Send us an email. Cars@brintech.com.au

We charge $6500 AUD. We also sell a complete kit for $3100 AUD.

Yes it can - but not the same way this is done. You will require a completely different box. We have them in stock and can carry out the swap for you

The bell housing needs to be machined, modified and installed with new parts for the manual to work. Where are you located? We can carry out the work for you

@@BrintechCustoms I am in Belize, However, the transmission is still in the US ,How much would you charge to do the complete conversion? Also I'm a machinist, I can do it myself here ,but I don't know what it is you do to it

Aaron Janzen if you send us the bell housing we can take care of this for $1250 aud plus a y freight.

Hi Nick - we dont know anyone personally in the states, but im sure there would be a number of shops there that could do it. We can certainly help with the coding and parts

Send us an email and we can run through the details. cars@brintech.com.au

Najib no we didn't. It's not nessecary when you do the correct coding

I'm planning to convert my gearbox to manual, is it possible to by the coding?

Najib yes where are you located?

To far away :( Sweden

Najib you can post me your ecu and cluster

www.brintechcustoms.com.au/e46-kits-and-parts/e46-m3-manual-conversion-kit

www.brintechcustoms.com.au/e46-kits-and-parts/e46-m3-manual-bell-housing-getrag-420g

isaac trueman unfortunately not the same process. we can do a manual swap but it's a replacement gearbox also. we can convert you to manual for $7000

Sorry we dont speak French - do you need help converting your SMG box to manual? We can help

Jimmy Lo we can have it done for you overnight

Thanks Tito. To turn off the display on cluster you need to code it to manual. You can do this with software called NCS Expert. This method requires some coding experience and can easily ruin the cluster if not done correctly. There are also other methods using an Auto logic Scan Tool which is much easier to do. Worst case you can send it to us and we can do it for you

@@BrintechCustoms Thank you it's nice of you to propose me but unfortunately I live in France, can you give me the name of the tool that would allow me to disable the screen, because I'm very annoyed ...? I own Ista-D my I do not think I can do it with this tool. I heard that you can just remove a fuse, but you can not find which one .. thank you in advance

@@BrintechCustoms I am ready to make a payment on paypal, if you give me the procedure to follow, or what tool used because the car will pass the technical control and it will be refused because of the light on, I look everywhere, nobody is able to suppress this light, you are the only one to have answered me, I hope you can help me thank you in advance

@@titogame5718 unfortunately a fuse removal is not going to correct the cluster from SMG to manual. It needs to be coded. This will remove the gear display and also the warning cog light from the panel. I dont think ISTA will do it, it really needs to be done with NCS Expert. If you have access to an Auto Logic scan tool then this will be easier for you. Like I said, worst case you can send us your cluster and we will code it and send it back. cheers

@@BrintechCustoms hello, I have NCS expert on my computer, but i do not know what To change, Can you give me the procedure ? Even if i have To pay you, It would avoid sending you the cluster, especially since i live in France, and i need the car. Thank you

Yes we can send out a kit to Malaysia. Please email us for info. Cars@brintech.com.au

auto l yes it is possible

Our complete kits are $3100 AUD

Do you have the link?

ビヨンセメリーナ yes it is. getrag 420g. you can see it embossed on the side of the gearbox.

@@BrintechCustoms thank you. I want to try conversion, but manual getrag gearbox casing is too expensive in Japan.

I’ll change my car Nissan Silvia→m3. I’m getting e46 m3 smg right handle Because smg is cheaper than 6mt. I check your shop’s online store, your convert kit is attractive product. And l was surprised that you sell Toyota1uz adapter in Australia : )

SLAM the video would go for 12 hours if we were to show how every step. If you want specifics feel free to ask. we don't intend to hide anything