Early Bronco + Holley Sniper EFI wiring!

Рет қаралды 34,627

4 жыл бұрын

Holley Sniper EFI install UNDERWAY! Learning as we go, folks!
If you need KILLER WIRING STUFF- hit up our friends at www.wirecare.com/
And HERE is the AWESOME kit we used- that comes WITH the fancy crimpers!
www.wirecare.com/interest/as-...
Want just the crimpers?
www.wirecare.com/category/too....
Want to contribute to the growth of our channel? :-) Become a member of our Patreon family here: www.patreon.com/user?u=27257528
PEAK Auto for all the COOL FACTOR we need!!! Join the #PEAKsquad for free perks and that car fam feeling!
www.owi.com/retail/brands/pea...
CRC Auto for SO MANY of our favorite products like Brakleen!
www.crcindustries.com/product...
Flying Sparks Garage official Website:
flyingsparksgarage.com/
•FLYING SPARKS GARAGE APPAREL•
shop.justgetdirtygarage.com/Fl...
•INSTAGRAM•
•@flyingsparksgarage
•@imemilyreeves
•@pilotreeves
FACEBOOK!
•Flying Sparks Garage
•Emily Williams Reeves
•FSG LINKS TO STUFF WE LOVE•
TOOLS! www.sonictoolsusa.com/
WHEELS! www.americanracing.com/
TIRES! www.continentaltire.com/
SUSPENSION! www.ridetech.com/
HOT ROD! www.hotrod.com/
MECHANIX GLOVES! www.mechanix.com/
Tunes from:
www.bensound.com
www.hooksounds.com
www.audiojungle.com

Пікірлер: 139

@3DTreats 4 жыл бұрын

Nice camera work catching the reflection in Emily's safety glasses!

@flyingsparksgarage 4 жыл бұрын

Matt Kennington Aaron rocked that shot!! When I was editing I was like ‘oh daaaang!’ 🥰😍

@rogersattler4423 4 жыл бұрын

At least you guys have different colored wires ....guy who wired my last race car used 1 color for everything and didn't label any, fun to troubleshoot. And yes it was me!

@dielauwen 4 жыл бұрын

You must be French. Peugeot used all white wires with tiny numbers on them you could not see.

@iadc43 4 жыл бұрын

I hope you fired him...you. Hahaha

@scod3908 4 жыл бұрын

Hope you used red wire so the electrons go faster!

@davidhodges4153 3 жыл бұрын

I really appreciate your wonderful shop show it's really awesome you and your husband know how to make vehicle run that's a very special gift

@anselb2000 4 жыл бұрын

Please NEVER change the ending! That little "jiggle" is fantastic!

@95Z28A4 4 жыл бұрын

Yeah...…..it guarantees I'll watch the video to the end.

@odahithedubious2017 4 жыл бұрын

Hooray! You got some good tools and materials for doing your wiring. If everything is set correctly and you do it right, those crimp connections are stronger than the wire itself. The crimp tool won't let you over or under crimp the connections, which is a very good thing. Yes, they are way more expensive than a $15 "kit" from the Mart of Walls, or your local auto parts shop, but they will produce more reliable, safer crimp connections. And using a lighter can actually burn your shrink tubing, as you noted. Then the tubing is brittle, and can crack resulting in shorts or corrosion. SO good to see people using professional tooling to do this important part of the job. It's a wonder we don't see way more people stuck on the side of the road, with some of the things I've seen on the Tube. Thanks for all the great content, you guys rock!

@flyingsparksgarage 4 жыл бұрын

Odahi The Dubious You’re absolutely right!!! You get what you pay for!!

@todhollo1961 4 жыл бұрын

I have been a mechanic for over 40yrs, am impressed. Keep on truvkin

@flyingsparksgarage 4 жыл бұрын

Tod Hollo That sure means a lot!!! Thanks Tod!

@FinnegansGarage 4 жыл бұрын

nice work! thanks for sharing the struggle with us. miss y'all!

@flyingsparksgarage 4 жыл бұрын

Finnegan's Garage Miss y’all too buddy!!!

@rong4189 4 жыл бұрын

Hey, Flying Sparks, I get it now!... (just kiddin’!)

@Jamesoxendine1 4 жыл бұрын

Wiring Fun, i miss it....we need a reunion!!!!

@davidnaccaratoii5370 4 жыл бұрын

Well Finley roxxx just like a super shop dawggy!!! Great VIDZ from Texas for all to enjoy

@xbrod7827 4 жыл бұрын

There were some flying sparks in this episode.great work em

@estpst 4 жыл бұрын

Emily holds her goodies, while reaching into the engine bay :)

@dielauwen 4 жыл бұрын

I would too.

@mikelester5123 3 жыл бұрын

I really enjoy you guys,an the accent ,I’m from Tn so I understand everything you say

@tekvax01 4 жыл бұрын

Wire routing and management is the most important part of an installation job! It is also the part usually left as an afterthought! Great job TEAM!

@danchristian7171 4 жыл бұрын

Emily and Aaron...You two are awesome! You provide so much inspiration to us old guys that haven’t worked on much other than a small block Chevy in an old Impala. Keep up the great content! Cheers 🍻

@wyattoneable 4 жыл бұрын

You are very good at reading and responding (when possible). I appreciate that, I know your both busy.

@65Coasty 4 жыл бұрын

Great vid guys. Can't wait to hear this thing runnin.

@scottpella7419 4 жыл бұрын

Those Wire Care ratchet pliers are sweet! I'm sold on getting a pair!! Another great video, thank you!

@rixkafer56 4 жыл бұрын

Aaron with the extreme close ups !! nice touch... im thinking of an efi for my car so thanks for the info

@davidryan573 4 жыл бұрын

Great video can’t wait to hear it fire up, it’s going to be a awesome Bronco.

@blueovallife6868 4 жыл бұрын

Thanks for another great video!! Can't wait to hear that Bronco running!!

@chappy5538 4 жыл бұрын

Can't wait to see how it turns out.

@jeffnevius 4 жыл бұрын

Glad you are doing a Holley EFI I have done 2 MSDs not impressed. Can't wait to see how it does.

@txnetcop 4 жыл бұрын

Emily those of us out of job probably can't contribute but we are grateful to those who can and to you and Aaron for putting content where we can see it too. Hey we like boo boos too! We also learn from you guys!

@thompsonsteveo2860 4 жыл бұрын

Very Neat wiring. Great Job

@jasonmorales1846 4 жыл бұрын

I put this kit on my 1957 ford f100 with a 302.it really is pretty simple to do,the hard part is having a clean wire routing.the throttle response is amazing,i have to be careful from a stop light cause I will break the tires loose.

@dmb2790 4 жыл бұрын

Good stuff . Keep it up .

@larryshaw6517 4 жыл бұрын

That was a truly inspirational look up your nose at very close range, sorry had to say something about it. Your video quality and editing are excellent, iswear that dog would sit on top of a volcano if you asked him to as long as you are there Emily. Thanks

@nairdmaster1 4 жыл бұрын

Loved it. Can't wait to hear betty fire up!!

@ODGColornChrome 4 жыл бұрын

Wire Care is an awesome company!

@cloucks1003 4 жыл бұрын

Love you and Aaron in the shop! After meeting you guys about a year or so ago in Columbus, OH, my Dad and son have been watching also!

@cloucks1003 4 жыл бұрын

Not sure if this is appropriate nor wanting to take away anything from the AWESOME channels you and Aaron have built...Dad didn't want me to say anything to anyone, however...about 3 months ago he called me and gave me news about him being sick. Not knowing for sure, he emailed confirmation on him being stg 4 pancreatic cancer. 5 times at Chemo, he still has good spirits about himself and resurrected a greater belief in God! He remembers meeting you guys (in Columbus Goodguys show with Church Bros.) and how down to earth you both were. He won't be able to finish his own '76 Bronco, but it is going to stay in our family. You are both an inspiring duo and I am glad to see the videos and great content! My request from you and the whole car culture world is say a prayer for my father, Rick and remember to keep working on the great cars and content! Sorry such a long response! Craig Loucks

@jonathanswindle7023 4 жыл бұрын

Thanks for this series. I am considering add this system to my 1953 Ford f100. I already changed the flathead out to a 302.

@mr.the-edmeister2750 4 жыл бұрын

Hopefully that '53 was converted to 12 volts years ago. 55 years ago a friend of mine had a '55 Mercury that the previous did the 6 - 12 volt conversion; Gary had the fastest windows in town, with the 6 volt electric window motors running on 12 volts! New modern radio as of 1965 when Gary owned it and everything else was taken care of; wiper motor had been converted from vacuum to a later 12 volt Ford wiper motor as I recall. about everything else was solved with 12 volt light bulbs to replace the 6 volt bulbs. 6 volt startes sure cranked the engine over a lot faster on 12 volts. LOL Wires were thicker / larger gauge made to handle twice the current that similar 12 volt components required, so not an issue. P(ower) = I x E I am old enough to have worked on cars from the 1950's as the industry slowly went from 6 to 12 volts as compression was increased in V-8 engines and "grew" larger CID-wise.

@tekvax01 4 жыл бұрын

Shop Dawg is back in the management division, and has assumed the position of power, on his comfy bed!

@ronaldwarren5220 4 жыл бұрын

The pup is the star of this video!

@jordanmiller5794 4 жыл бұрын

you two are great i love watching the episode keep up the good work you to

@ericcorse 4 жыл бұрын

Wire care products have some cool stuff.

@TheCanadianBubba 4 жыл бұрын

Ha ! that was cool seeing the back of the ignition switch reflecting on you glasses ! Great days ta all o ya !

@70sstreetracergal61 4 жыл бұрын

You both so rock and snuggles to Finley!!! ❤️👍🏻☮️❤️

@dklbbach 4 жыл бұрын

Like the remove before flight key chain fob!!!!!!! I have a few of the myself.

@jimwhitman5805 4 жыл бұрын

I'm looking at the Holley Sniper EFI for my 79 F250 to make the cold starts a little smoother, and the different altitudes even better when we take it out.

@brianbrown543 4 жыл бұрын

As my Dad used to always tell me (more like holler), "Never ever set tools on the battery." It only took one time of arcing it to finally understand why. It destroyed his favorite ratchet and nearly killed his No. 1 son (that would be me, first born).

@corvairchris82 4 жыл бұрын

I was going to ask if anyone else cringed when Emily placed the crimping tool on top of the battery, it gave me the willies. Emily Please use more caution where you place your tools, I don't know if you have ever seen what happens when a battery explodes, lets just say it ain't pretty. Speaking of pretty, if you're standing anywhere near that battery when it goes off it might just be the end of your modeling jobs. Stay safe.

@tekvax01 4 жыл бұрын

awesome keyfob!

@shannonbrown7659 4 жыл бұрын

Hay Emily, when I'm working in a confined spot I put a shenk tube on the paperclip to keep from ground it on stuff. 🎇 Nail polish may work to !!Lmao just something to try !!! Love the video!! Thanks for sharing !!! 👍💯👍🧨

@douglasdayton9327 4 жыл бұрын

Keep it up and don't let the haters get to yah!

@raymondverheeck320 4 жыл бұрын

I love watching you 2 work on vehicles, Emily you are so funny and gorgeous that I'm falling in love with you. Stay safe you guys

@americanhomeimprovements7932 4 жыл бұрын

Great video!!!🤘🏻🤘🏻🤘🏻

@kinotransam 4 жыл бұрын

Yooo!!! Ms. Emily lookin 🔥🔥🔥 in that shop uniform 💯💯 Love the build guys. Keep up the awesome work!!!

@shanewright6958 4 жыл бұрын

Great job and video 👍👍🇨🇱

@dalicejohnson8338 4 жыл бұрын

You guys ROCK!!!!! Hugs to you guys

@kenthurman3276 4 жыл бұрын

Love it!! ❤️😎

@mrchevytrucks666 4 жыл бұрын

Keep wrenching doing good job

@robertevans6481 4 жыл бұрын

Wire care going to check out there website,nice set up with those connectors. I see flying sparks....for real

@davidowen888 4 жыл бұрын

awesome 👍☮

@dwaynelejeune3508 4 жыл бұрын

Would like a up date Looking at the Holley vs Fitech for my C10 build. Luv watching your channel

@2gnospam 4 жыл бұрын

Great!

@thomasmayes471 4 жыл бұрын

I watch every episode

@brianrhodes237 4 жыл бұрын

I’ve got 2 suggestions. 1) run an earth from engine block to Sniper base (terminate on mounting stud), 2) give the wires running to the battery some protection, if the positive shorts there is no fuse until the back of the wheel well...

@mr.the-edmeister2750 4 жыл бұрын

Quite honestly, an EFI ground needs to be directly to the Battery,and best to have all EFI grounds so connected in series to reduce the "bulk" of multiple grounds. AND 12V power to the ECU (the keep alive circuit for the ECU) should be connected directly to the positive post with the "master fuse" as close as possible to the battery. And considering that their Odessy battery was 2 posts each, the 5/16 / 8mm studs make for a "terminal post" for connections like that. Battery cables to the posts intended for them. Too many "shared" connections on either side can present problems that are self-induced upon assembly or crop up as the vehicle is used over time. Oh, and don't use the same 'terminal / screw threads' to power fuel pump/s; they need to be run thru a relay wired to the ECU and can be powered off the "starter" cable as "motors" like that aren't as sensitive to minor fluctuations in current draw.

@liamhollin8265 3 жыл бұрын

Very tempted to put a holly dominator on me old 215 range rover. Runnig a 390 holly carb at the moment. Which is brilliant, the jury still out on the fuel injection package (mainly cuase of the £2800 price tag)

@charlesmoxley739 4 жыл бұрын

I have one of there batterys in my boat and its going on 4 years old and still fine only issue i have lol its the heaviest battery i have ever seen Peace

@stevethuss2707 4 жыл бұрын

i myself appreciate 20 min. or less cause i watch or subscribe to bout 250 chanells & only allow 3 hrs. a day to computer 4 myself. but ur channel is priveledged if u go longer. luv u guys.

@barryfields2964 4 жыл бұрын

Nice rear end!

@dielauwen 4 жыл бұрын

She knows and makes money with it.

@briantanner8711 4 жыл бұрын

You should have your negative battery cable from battery to engine and engine to frame and frame to body. Just FYI. This is how I look at it- first engine will run without the vehicle so it needs a power source, battery and engine connected will run. Or you can also look at it like for the power circuit you would want the shortest distance in a positive to negative loop to create the least amount of resistance and most efficient charging circuit so then the frame would become the main grounding source for all of the body and in the case of a pickup the bed as well. That's just my thoughts on an electrical system anyway.

@cfuller926 4 жыл бұрын

looked compfie under there, c'mon over to Amherst. Mine needs wirin wrk 2.

@sixt9stang 4 жыл бұрын

Great episode! Every time you mention products from WireCare I go to their website and look for stuff like the kit you show in the beginning of this episode. Never able to find it though. :(

@flyingsparksgarage 4 жыл бұрын

Gary A Here ya go! www.wirecare.com/interest/as-seen-on/as-seen-on-finnegan-s-garage/products-used-by-influencers/ht-shop-k-hillsdale-terminal-shop-kit

@sixt9stang 4 жыл бұрын

@@flyingsparksgarage Thank you!

@95Z28A4 4 жыл бұрын

Suggest taking the time to solder and heat shrink tubing all wire connections. I can't begin to count the number of bad crimp splices I have cut out and repaired with a good solder joint in the last 40+ years. Crimp joints develop corrosion over time and the result is a compromised connection. With that said, I haven't used the combination crimp/heat shrink connectors I've seen lately. I believe those should be better as they likely prevent moisture intrusion.

@tekvax01 4 жыл бұрын

THANK you for using a heat gun on the shrink tubing, and NOT a cigarette lighter! The lighter will just burn the tubing, and allow it to fail in the future... The heat gun is the correct tool for the job +1

@mayflowerlash11 4 жыл бұрын

It's how we all learn, make errors and adjust next time. btw re that close up on Emily while laying under the dash ... She IS beautiful.

@mr.the-edmeister2750 4 жыл бұрын

IMO, better to compliment Emily on her skills and what she learns than her physical appearance ... just saying.

@neilperry2224 4 жыл бұрын

I think you should have been singing 'sittin on the edge of the bay'

@tazone1121 4 жыл бұрын

Nice job, I ended up replacing the whole wiring harness on my 74. I would invest in a OEM manual for your Bronco, you can get them on CD cheaper than in book form, great thing to have. I see the Holley Sniper sits on a spacer , with the air cleaner on, does the hood clear?

@flyingsparksgarage 4 жыл бұрын

taz one It does close! Thanks to the 2 inch body lift 🥰

@davidwindsor3601 4 жыл бұрын

It is official your a nut. Had me laughing. While working. Thought you where fresh out of the geto while commenting under the hood.

@jeffbonner2422 2 жыл бұрын

I'm Enamored with you Emily! We both have spouses but I can run to the end of my chain and bark! Lol, I would love you to help me put my 79 chevy crew cab C20 together as I'm no mechanic. Actually it's at a shop for all this work! I'm doing Holley EFI, MSD ignition6AL, MSD ready to run Dist, Blaster2 Coil. all installed along with a Dakota Digital HDX Cluster upgrade. Research has been daunting! You are so attractive Looks, personallity and Talent!!!

@mayflowerlash11 4 жыл бұрын

Watching Emily under the dash work on wiring I realised what a great choice the Bronco is as a project car. I can barely get under the dash of my hyundai. Also the engine bay is roomy. Emily comfortably sits on the fender with her legs in the engine bay. And I notice the fender well is not curved but is made of flat sheets, making it easy to mount stuff where ever you want. and another btw, "But you are the light of my life." I can see why, once Emily got Aaron in her sights, he didn't stand a chance. LOL (lucky Aaron)

@mr.the-edmeister2750 4 жыл бұрын

That was in the days long before external sheet metal and inner panels were used for structural integrity for "controlled crush" in the event of a collision. Plus most vehicles of similar size these days support suspension components on the "fender well".

@AaronHardinPhoto 4 жыл бұрын

Did y’all get new lights? The lighting looks really good in this episode.

@flyingsparksgarage 4 жыл бұрын

Aaron Hardin Same ol Amazon soft boxes!!

@-SF1- 4 жыл бұрын

Painless has a nice wiring harness for the EB. Just sayin...

@AntonioClaudioMichael 4 жыл бұрын

Great episode Emily and Aaron @flyingsparksgarage

@G0lfFish 3 жыл бұрын

A tip you may already know, but I don't think I've seen you share with your audience. Wire terminals' portions that the bare leads go into are flat metal bent into a closed 'C'. When crimping them, it is better to have the "pointy" part of the crimpers press into the solid metal, and not the closed ends. The terminals are less likely to come off. Does this make sense?

@dvomni3342 4 жыл бұрын

That drill attachment is the bomb! Where’d you get it?

@flyingsparksgarage 4 жыл бұрын

DV Omni Lowe’s! Dewalt!

@brianherron5400 4 жыл бұрын

Is that's why you call it the channel flying sparks 🤔 because you had some going on there 😂 - lol.

@mr.the-edmeister2750 4 жыл бұрын

If that was at the ignition switch part of the video, a run of heat shrink tubing over the paper clip could have avoided a "short" there. Homemade tool to use in the future! Usually no problem with 12V supply side power, but with 0 - 5V sensor side wiring it could create a problem with ECU or create a minor fault that is all but impossible to diagnosis "down the road", or when you are ON the road and broke down when headed to Power Tour or another event. I am an ex-Navy Aviation Electronics Technician, VietNam era.

@greatnortherntroll6841 4 жыл бұрын

@9:44 NO Emily! Not the YELLOW Wire! It's always the Red Wire!🤣🤣🤣

@ThEmAxHaThAwAy 4 жыл бұрын

How's the hood clearance with that massive spacer underneath the throttle body? Will you be putting a normal air cleaner on top or something different?

@flyingsparksgarage 4 жыл бұрын

MaxHathaway Factory air cleaner, and it clears!

@hammerboss3573 4 жыл бұрын

@@dielauwen First On Race Day

@mr.the-edmeister2750 4 жыл бұрын

The 2" body lift helps!

@ehumaui4087 4 жыл бұрын

Did you do a wire harness upgrade?

@flyingsparksgarage 4 жыл бұрын

ehumaui 408 Not yet!!!

@rod426 4 жыл бұрын

I'm thinking of doing the same to a muscle car. I have a rev limiter on my car. Do you know if that can be used?

@mikemullay5622 4 жыл бұрын

Emily where did you get that angle adapter? I really need one of those.

@flyingsparksgarage 4 жыл бұрын

Mike Mullay Dewalt unit from Lowe’s!

@mikemullay5622 4 жыл бұрын

@@flyingsparksgarage Thank you!!! It's now on my shopping list!!! You rock!

@davidhodges4153 3 жыл бұрын

Do you guys sell any sweatshirts

@TravisCockerell 4 жыл бұрын

- You should always wear safety glasses when working over a battery. They can and will blow up. All it takes is a small spark.

@mr.the-edmeister2750 4 жыл бұрын

Old wives tale considering how modern batteries are constructed now-a-days. No 'fumes" to ignite via a spark. But as far as safety glasses alone go, laying under anything old that has dust or loose rust is a risk to a person's eyes.

@TheIanmurphy 4 жыл бұрын

i have the sniper in my bronco and i love it but the only thing i can say is keep all the efi wiring away from the spark plug wires! the signal wires insanely susceptible to interference

@flyingsparksgarage 4 жыл бұрын

Ian Murphy Thanks for that tip!!!

@jbncnow 4 жыл бұрын

I would have removed the ignition switch, im too old to crawl under dashes anymore but i used to every day installing car stereos, the first one i did for a living was in a first gen Bronco like this, it was orange . I want to put a stand alone EFI on my 85 chevy Square body Silverado with a 300 hp GM crate engine, it runs ok but 16 gallons of gas doesnt last very long when your getting 11 mpg,also in NC its very cold in the winter so hard starting is a real issue here .So why did you choose this brand? some people like the Holley Sniper some like the FI TEC and then theres the FAST brand, i even saw where Fi Tec has a LS one style Injection system for LS type motors. I like EFI but its a lot of money to drop especially since i just blew 1500 for a Vintage air/heat system, i only paid 600 bucks for the entire truck lol but its all restored and pretty now.

@flyingsparksgarage 4 жыл бұрын

jay bradley We year so much great stuff about the Sniper system, we’ve ran FAST stuff- just wanted to try something different!

@keithhaycraft3765 4 жыл бұрын

I cannot believe that until this episode, I thought your husband's name was Erin. Lol.

@mayflowerlash11 4 жыл бұрын

AAAAhhhhh! Hand tools on the battery! Is it charged up? Are you trying to create another kind of flying sparks?

@flyingsparksgarage 4 жыл бұрын

Gary LeLacheur I gotta do something dumb on every episode so y’all have stuff you can give me a hard time about!

@mayflowerlash11 4 жыл бұрын

@@flyingsparksgarage You guys are great. Love your vids. I am 64yo and struggling to get to my project car through all the usual trivial life distractions. I get inspiration from you to keep at it. Thank you, very much.

@edvisme 4 жыл бұрын

Completely off topic here. From where you and Erin live, how many drag racing facilities/drag strips are there within about an hour drive? I enjoy you video's and projects. Oh, also, where did the blue Nova go?

@flyingsparksgarage 4 жыл бұрын

edvisme There’s about three or 4 drag strips within an hour! The 72 nova was purchased by a guy in the Netherlands! The blue wagon we LS swapped belongs to our friend Max 🥰

@edvisme 4 жыл бұрын

@@flyingsparksgarage Thank you for the reply. So envious! I am in Northern Utah. The only drag strip we had (Rocky Mountain Raceways) was caught up in "greed" and was closed 2 years ago. The closest one now is about 1.5 hours away and it's only an 1/8th mile. The closest full on NHRA type 1/4 mile strip is Boise Idaho's Firebird Raceway. I had feeling that there was quite a number of Drag Strips down in your neck of the woods. Are they open year round? If it wasn't so darn hot there in the summer months I'd probably find a way to move to Texas.

@mr.the-edmeister2750 4 жыл бұрын

@@edvisme Texas has lost its share of auto racing facilities over the years, but many were gone before Emily and Aaron were even born, and maybe you too. Same here in Northeast Illinois, but is worse for us is the loss of General Aviation fields. 8 were developed within 20 miles of where I have lived on and off since the late 1950's, where I grew up. And I miss the old Glenview Naval Air Station 8 miles away where I served as a Ready Reservist 1967 - 1973; I miss the Weekend Warriors overhead since 'base closure" there in 1995. The old Curtiss-Wright field before WWII; the 41st Pres Bush trained there and did carrier landing drills out in Lake Michigan onto converted iron / ore ships that sailed the Great Lakes before that war.

@888johnmac 4 жыл бұрын

top tip .. do not use a big high amp battery as a tool tray .. bad things can happen

@flyingsparksgarage 4 жыл бұрын

888johnmac Yeah, that’s pretty dumb huh!

@johnc2292 4 жыл бұрын

You forgot to show how to install a Finley on a wheel well.

@mittenstategarage9093 4 жыл бұрын

I was about to say that terminal needed to have power in the start position also, but Aaron interrupted me...

@kurtisjohnson4562 4 жыл бұрын

#1 what happened to the fender flare next to your head at the end? #2 you are way too comfortable under the dash, but since it's a ford I guess that's a selling point lol.