Finally! An installation video that actually shows and discusses how to mess with the fuse box to light these up! Thank you!

I definitely appreciate your simplistic explanation for installation. Thanks

Rock -N -Roll ...! Passion, Skill and Knowledge ... Great video and 1 less truck fire for me!

Dude great video honestly the best ive seen so far on this current subject and you even went in depth with the incorrect and correct way. Keep makimg content youre the real deal! 💪

Appreciate the thorough walkthrough and link to fuse taps! Looks amazing man

Great point about starting in the middle!

Mannn thank you so much for braking it down the way you did!! What a great way to explain this! For sure I will let you know when I get my lights thank you very much! You have a new subscriber here

I just bought an LED strip like that for my truck and gonna get some other LEDs to go around the bed and two strips to go under the hood for better lighting there also and this video helped show me how I should actually do it

Thank you for a great video ...beautifully done.

Knowledge is magic thanks my man very professional!

Thanks very much for a very easy and simple way to install these lights.

Saw a different video earlier labeled "simple" but he made it complicated. This was so much better. The brown step side looks sweet btw!

Excellent install video. Thanks now I will install mine

Great video, thanks from 🇨🇦

You are the man, thank you for doing great video. Keep them coming.

Great video! Would only suggest adding a little electric grease to the wire ends to prevent corrosion. Other than that, great step by step!

Thanks for the tutorial!!! Much love from Texas bro

Thanks for the guide from Sydney NSW Australia 👍

I can finally do mine thank u

This is sickkk

Excellent Explanation. Thanks

Great video explanation/demo. I just received my LED strip fir my Ram 1500 Laramie. Thanks for the video. 👍🏾

Thanks for up close explanation of the fuse placement.

Nice. Thanks.

You do a very great and professional job man. 🎉

Looks great! Great looking truck too!!!

Great instructional video, thank you. It would've been nice to see the scanning light when you turn your beautiful truck on.

Very good video and the music is amazing

Just gave your truck a huge funky unibrow

Great video thank you

It looks clean man nice .👍

So cool I’m going to order me one thx 👍🏻

I watched a number of similar videos and yours is definitely my favorite. But for some reason nobody covers the little issue I had of not being able to close the fuse box cover with a wire sticking out from the fuse tap. I had to cut a notch in the lid for the wire with a Dremel so I could close it. Maybe this was obvious to others but I had to get over my OCD reluctance to "damage" anything on my new car. I reasoned "it's just a lid, who cares" :-)

Nice job

Fantastic video

Great video and demo. New sub. Thanks!

If i had a truck 🚚 👍lights look great, good video 🤘

Truck looks great 👍🏼 an i did like n subscribed ordered those things too 👍🏼 great video 💯👏🏼💯

❤thank you👍🏽

Not gonna lie, that looked sick as hell. I actually really like that. I did have grille lights on my front grille on my Silverado, they were a separate piece of plastic that came down the sides on the inside and across the bottom like 1/4 of the way through and I cut the sealant they used off like some kind of silicone or something and I took the white lights they had in them and replaced them with some other RGB led strips I bought off Amazon that were meant for the eyebrow lights and the had a switch back function too. I put it all back together and sealed them again myself, which I thought I 100% sealed them back, here in Florida we had a nasty week of rain and somehow rain got into the plastic housings and friend the LED strips because the strips I used came in the same rubber covering but I had to take them out to fit in those pieces for the grille. So now I’m on attempt 2 with different LED’s but actually might not use them after seeing this, what I might do is get 2 of these strips and make a whole outline around my grille, maybe take some of my green vinyl tint and wrap them in it so it gives off a green tint instead but hella sick. I totally dig it.

I was able to get that nice animation on start up by fuse tapn my parking light fuse. It may get annoying seeing it every time you open/close doors but it doesn’t stay on the whole time and when you remote start it the lights are nice

Nice video thank you 6:48

Now I can order me one thanks!!!

Very good video bro

Cheers Dude :)

I have a Refreshed 2022 Silverado 1500 RST. I installed this recently on my truck and maybe can help someone out there who may have some questions on this install with the same truck. Firstly I installed it on the actual hood of the truck in front of the weather strip(just my preference). You cannot see the light at all from installing it in this location(tape the light itself almost dead even to slightly proud of the edge of the hood). I ran the wires through the hood and grounded it to the negative battery terminal with a crimped electrical eyelet. The positive(red/hot wire) I ran to the engine fuse panel and used a fuse tap into fuse #28 (Park Lamp Mirror/Grill) using a micro2 5 amp fuse. The light draws about 2 amps so you don't need anything above 5 amps. When installing the fuse tap(install factory fuse on the bottom then the new fuse where the wire is part is) pay attention to the way you pull out the fuse from the panel, you will want to install the new fuse tap in the same direction. The orientation does matter so the spades should all be following in the correct direction.(watch a fuse tap video if you are unclear of what I mean.) It can potentially cause electrical issues if you do not have this orientation correct even though it will "work" either way you put it in. Those of you who have this truck know that when you hit the unlock button there is factory dynamic light show with the blinkers. When using fuse #28 the led light strip WILL activate as well when you unlock the doors in-sync with the front blinkers. The dynamic LED light will NOT stay on constant with just the DRLs on during the day. When the head lights are on at night the LED light will do its automation when the truck is started and stay illuminated until you shut the truck off. Hope this helps!

Thank you🤙🏾🤙🏾🤙🏾🤙🏾

Thanks for this! I watched this video wondering if it would be too challenging for me to install and I'm thinking no. I just need to get the fuse caps. Thank you!

Great video, precise and straight to the point! Would it better to attach the red wire to the day time running light fuse or just any fuse that has no power when the car is off? What about the Amp? Dose it matter since the fuse tap is 5 Amp? Do you need to find a fuse (no power when car is off) that is only 5 Amp or any Amp is ok? thanks. Subscribed and thumbs up

Great video! Thanks as always for your content! Quick question... How bright are they during daylight? I have halogen DRLs and would like to add a more modern look to my vehicle. Thanka again!

👍👍👍👍👍👍

And that means the lights are on unless turned off manually, nice.

Nice. Now I just need to find a spot for my train horn on my 2019 Sierra.

what is the lenght of the led strip would you recommend for a ram 1500 - crewcab. awesome video by the way - just subscribed.

We i used multiple fuse tap in one fuse

Great video!!! Finally found a video where you do it correctly unlike all of these stupid people inserting the wire right into a relay... I bought the same LED strip but mine has a turn signal option. Any idea on how to make it work with the turn signals?

He said don’t do it that way but my Durango has been installed the lazy way for 7 months now

Imo, the strip with the signal lights Ana alternate options would be way better. Still a slick clean look though.

I installed an orange one to match my clearance and mirror lights on my Ram. Told by an officer that the hood light is "not legal" to have as they are not DOT approved. 🙄Another great reason to be pulled over in VA. Have read of many people having issues with the light strip failing. When it does plan to go to single orange lights in grill like the Raptors have.

The one that JL auto sells is 4 leds instead of just one led strip

Brother that’s awesome. What size did you buy? I have a gmc sierra ?

i have mercedes ben glb 180 . could you please tell me which Fuse should I remove and I bought also fuses and the cable . which one should I remove and should I insert

Hey quick question, I really liked the sound of your exhaust, what kind of exhaust system you got in your ram?

Great video! Just one question. I purchased the one that would work with turn signals as well. Any video or advice on how to connect those wires to work when turn signal is on? Thank You in advance.

Great video I just have one question what do you do with the negative wire when you have the fuse tap ?

great video man just 1 question is it on for the day aswell?

Awesome video! Which red fuse did you tap into when installing the fuse tap?

Yoooooooo. Very nice video... wanted to know if i had 2 strips, can i merge the wires together to get the same power source at the same time? Or use separate power source for each strip?

Thank you for this video. I’m a bit confused on the fuse tap. Does the light wire go in the tail or do I create a fuse for it? Also what is the name of the song in your video?

Ada county!

What do you do if you have to pull your grill out and change a headlamp

Can you make a video on installing it to a 2021 toyota corolla le

Do you have a link for the ground wire eyelet or can you pick that up at any auto parts store? Is there a specific size I would need?

Hey loved the vid but newbie here still a bit confused on the fuse box install, the strip I bought says it’s a 12V and when I look up the fuse box amps for my 2015 Honda Accord Hybrid the DRL is a 7.5A so do I just plug the piggy back into the DRL port and put the old plug into the bottom of the piggy back and tie the wires together and it would work? It’s okay that the DRL is 7.5A and not 12? would rly appreciate your help thank you in advance!

In person are you able to see each individual LED or does it actually diffuse and make it look like one light? I know on camera it looks really nice and diffused and like one light but I've seen some of these things in person and oftentimes the cheaply made ones you can see each individual LED in person

I cannot get the fuse taps to fit into the fuse box ACC slot. The fuse taps are too thick to slide into the "fuse slot". Any thoughts? Solid video by the way!

Hey bud i have question say i only need a small for piece for my hood vent which is like 16 inches or so can i use what i cut off and rewire it all together or once i cut the led its no good? I think i have enough to do my hood?

My question is what size fuse (amp) do I need in the upper slot of the tap in order for the led lights to work? Thanks!

Great, simple instructions. So for the tap, after I remove the fuse where I'm stealing power and place at the bottom, is there a fuse that goes at the top OR leave it empty?

When using the fuse tap. You put the old one in the bottom but how much amps is the new one supposed to be ? The one at the top. Same amount as the bottom one ? Or more.

if I'm tapping to a 15amp fuse, what fuse would I use for the top slot? 15amp is the only size that fits. also, I can't seem to get a snug fit while using the fuse adapter and the LED lights are very dull....any help is appreciated.

That last bit with the fuse tap: you put the fuse you took out of the fuse box in the bottom slot on the tap, do you have to add something to the top slot on the tap or does it still provide power to the wire?

How do you know what fuse to hook it to? I have an Audi q5 and just learned that all 3 fuses are in the car and not under the hood.

What was your center on your RAM? I have a 2018 RAM. Where did you measure from on your truck? The other thing is what size of lights did you get? 59 inches, 70? One more thing, what fuse did you use for the top fuse tap? Thanks 👍

What size fuse do u recommend for 4 of them? I have the same truck but I think I might wire into parking light fuse if that’s a possibility?

I have fuse taps and was going to use one in the slot where the lights are being used, but the tap doesn’t fit into that small space. Should I use another slot that is not being used for anything?

Says "please do this the right way" then says "smash it down"... 😂😂😂😂

I tried using that same fuse tap but I did not use Two fuses. Do I need to use two fuses when adding that adapter?

This is helpful if your fuse happens to be under the hood. What about when the fuse box isn’t there?

I may sound dumb right now but is there a certain type of fuse that is better. Like what size of fuse I guess is what I am asking. Thank you so much for a simple video explaining all the steps.

With installing it on that top lip, does it make it harder to open to hood of the truck? I think it projects the most light from that location, but I'm worried about functionality going forward and opening the hood. How does it do with that?

think i just keep missing it, but did you say what length you got?

How to install for Toyota Highlander 2018? Please 🙏🙏

I tried to follow your instructions but when it came to the fuse box, none of my fuses were an acc fuse, I tested all of them and they were all hot, so what am I missing or is there another spot where I can get power? My vehicle is a 2007 Honda accord hybrid.

i have a ram 1500 too and i need the numbers of the fuses you used plz

Would it work with a bug deflector? Is it going to be as bright or it might act the same as if you used a black electric tape?

How to find ACC inside your fuse box? I checked mine, none of the slots has ACC marking.

What headlights do you have? Thanks in advance.

what about the factory weather strip thats right at the edge of the hood? will the light still show or does the weather strip cover it up once the hood is closed??

Can you wire this so it comes on when u unlock your car with fob