Easily Create Your Own Aircraft Virtual Radar Using The NooElec FlyCatcher Pi Hat

Рет қаралды 20,317

16 күн бұрын

Here we take a look at the NooElec FlyCatcher. Two SDR receivers on one pi hat, one for UAT and one for ADSB. We also take a look at installing tar1090 and graphs1090 on a raspberry pi 3b+
FlyCatcher Available here:
US Amazon: amzn.to/4eucIl2
UK Amazon: amzn.to/4esTV9Q
Raspberry Pi:
s.click.aliexpress.com/e/_mrC...
Software installation:
github.com/wiedehopf/adsb-scr...
If you would like to show your support for this channel, then please consider becoming a member by clicking here:
/ @techmindsofficial
Products used in my videos can be purchased through my Amazon storefront.
US ► www.amazon.com/shop/techminds
UK ► www.amazon.co.uk/shop/techminds
Patreon ► / techminds
Twitter ► / techmindsyt
Facebook ► / techmindsyt
Instagram ► / tech.minds.official
Send $$ ► www.paypal.me/mobiledev
Merch ► teespring.com/stores/techminds
Some links provided in my videos are afilliate links, whereby I earn a small amount of revenue from sale using my links. You will NEVER pay more that the advertised price and every penny raised from affiliate links is spent on purchasing new cool radio related gadgets to keep you guys entertained.
#TechMinds #SDR #HamRadio

Пікірлер: 68

@CosmopotamianAli 2 күн бұрын

This picks the most number of planes among all other options out there today. Pretty clean signal (very low NF). Well designed and matched RF chain.

@SnottyW 9 күн бұрын

Always look forward to your videos, thank you. Bought the Sawbird+ ADS-B a couple weeks ago but haven't gotten around to installing it. Returned it to Amazon yesterday and ordered one of these. Fingers crossed.

@TechMindsOfficial Күн бұрын

Awesome! Let us know how you get on with it. Which antenna will you use?

@noclipkip 15 күн бұрын

Sweet hardware and great video!! Your channel is one the reasons I got into SDR radio.

@TechMindsOfficial 14 күн бұрын

Thank you! :-)

@kaptainkaos1202 14 күн бұрын

Sweet! I just ordered mine. I’ve got to get a tower set up.

@TechMindsOfficial 14 күн бұрын

Hope you enjoy it!

@explodinglemur 15 күн бұрын

I don't understand the purpose of the Pi hat form factor if the GPIO header is completely unused and you plug it in via USB anyway.

@TechMindsOfficial 15 күн бұрын

You get 2 x SDRs, 2 x Filters, 2 x LNA in one small form factor board. USB is independent from the GPIO and any data capable lines on the GPIO would not have the throughput.

@PaulGrayUK 14 күн бұрын

@@TechMindsOfficial Really, it's just a plug and been way better if it was an external USB3 device as the hat form factor offer no advantage in the way it is designed, and don't see how it could. PCIe on the Pi4 would be an option, though external would be better on many level.

@GeorgeAdams 14 күн бұрын

Right, this should be mounted underneath and not on top.

@AdrianPatten 14 күн бұрын

I agree. what a messy setup.

@explodinglemur 14 күн бұрын

@@TechMindsOfficial yep, but they could have made it just a separate device with its own enclosure (and could have used a USB hub IC so you only need one USB connection).

@x_CrossHair_x 15 күн бұрын

LOL ..What an Innovative Product Name (FlyCatcher) .. This is another reason I would want a Raspberry Pi for a detocated Set up for ADS-B.. But .. I Don't need the Board as I would Just use a simple RTL-SDR with the Software.. The Home Brew ADS-B (1.09 Gig) Antenna that I made.. (Rocks) 200 Mile Radius Reception... No LNA or Filters needed. (Some PVC Pipe and some RG-6 Coax is all you Need to build one..) (16 Segment Co-liniar 👍)

@coriscotupi 14 күн бұрын

Ditto. I fail to see why I'd purchase a $99 board if a $15 (or less) RTL dongle will do the job just as well. I have been providing flight radar and radar box with ADS-B data for many years now with el-cheapo RTL dongles and home made antennas without a glitch.

@bob_mosavo 12 күн бұрын

Thanks, Matt 👍

@allanjones4283 7 күн бұрын

You're a champion !!

@TechMindsOfficial Күн бұрын

We are all champions! :-) Cheers

@Allan_aka_RocKITEman 14 күн бұрын

Great video...👍

@TechMindsOfficial 14 күн бұрын

Thank you 👍

@bmh67wa 15 күн бұрын

I run the blue FlightAware Pro USB stick with a Raspberry Pi 3B. It runs hot unless I use a fan so I've always been hesitant about using a hat with it. Maybe it's the quality of the heat sinks I'm using? I don't know but this hat is interesting and would be awesome for me since I can only do ADS-B and not UAT with my current setup. The ability to run both from one interface and one piece of hardware is awesome.

@paulw7404 12 күн бұрын

To make this portable (Handy for Drone flyers wanting to monitor local A/C) I assume you could write a script to find the current location and use that?

@Pedro8k 12 күн бұрын

You can do the same with two sdr connected to two usb on the pi

@simonsimpsonuk 15 күн бұрын

Another Great Video thank you

@TechMindsOfficial 14 күн бұрын

Glad you enjoyed it

@borisvokladski5844 15 күн бұрын

Does the two SDRs have different serial numbers ? I could be a cool product, if the hat took advantage of the GPIO pins, instead of having the two USB cables hanging (not as compact). It is too pricy for me, beacuse I cannot use the UAT part in the EU. But it is always nice to see new products, so you know that is out there. Keep up the good work.

@nofider1 15 күн бұрын

The UAT filter could be removed and replaced with a capacitor, You then have a wideband sdr for use on aircraft band using other software ie sdr#, HDSDR etc. After all they are 2 independant receivers. Just a thought. :-) Typo edited

@TechMindsOfficial 14 күн бұрын

@nofider1 That's a really cool idea! As I am in the UK I would never use the UAT side, but having it connected to an AirBand antenna I could also use it to listen to airband.. nice..!

@mstover2809 14 күн бұрын

Will the RPi output this display on it own HDMI output or do you need an external PC?

@TechMindsOfficial 14 күн бұрын

You can use the HDMI output to view the pi desktop and then just open Chromium browser to view. So yep, it can be done.

@DownandOutNYC 15 күн бұрын

Why place the filter AFTER the LNA?

@ZiggleFingers 15 күн бұрын

the lna adds insertion loss -- thus you have less signal to work with - counterproductive.

@explodinglemur 15 күн бұрын

You've got two options for filter/LNA arrangement order and each has pluses/minusues. Antenna -> LNA -> filter: You get maximum signal into the LNA so you minimize your noise figure. However if you have strong signals not in your target band you can saturate the LNA and then get nothing of your desired signal. Antenna -> filter -> LNA: You reject all undesired bands so your LNA has only the signal you want being passed to it for the cleanest amplification. However the filter adds insertion loss and so with a lower strength input signal you get a higher total noise figure. So, it depends on your RF environment. A Pi sitting on a desk or in an attic is less likely to have strong signals in other bands saturating it so they went with the option for a lower noise figure. The best place for the LNA is right at the antenna though so you don't get feedline losses before the LNA which can increase your noise figure.

@TechMindsOfficial 15 күн бұрын

And that’s why I used the LNA in my antenna and disabled LNA on board. Worked extremely well.

@MatthewCrawford 15 күн бұрын

@@explodinglemur Really appreciate the very clear explanation.

@bob_mosavo 12 күн бұрын

@@TechMindsOfficial "IN" your antenna or "AT" your antenna 🙃

@rohnkd4hct260 9 күн бұрын

Want To try it. But I’m still having a problem getting mySDR working.

@tratzum 15 күн бұрын

Why not just use the ADSB Exchange pi image? It uses the same UI.

@TechMindsOfficial 15 күн бұрын

Not everyone will want to feed their data. Anyhow, as I said in the video, there are many ways to achieve supported software, this was just one way which is easy.

@ocsrc 11 күн бұрын

It would be nice to have this to receive the entire band of 25 MHz to 1.3 Ghz and if it can decode DMR, NXDN, Open Sky, Phase 1 digital and phase 2 digital simulcast networks as well as analog So we can have a nice blind scan scanner

@autonomous_collective 15 күн бұрын

Cool 👍

@cbllbc244 15 күн бұрын

So it's an overcomplicated, quite expensive SDR in which the filter is used after the amplifier for some reason, and it doesn't use GPIO anyway and has to be connected via a USB cable?

@petewright2283 15 күн бұрын

Yep. Totally pointless

@TechMindsOfficial 15 күн бұрын

You get 2 x SDRs, 2 x Filters, 2 x LNA in one small form factor board. USB is independent from the GPIO and any data capable lines on the GPIO would not have the throughput.

@petewright2283 15 күн бұрын

But you get something that only can be used states side. Still rubbish here in the UK/Eu

@TechMindsOfficial 15 күн бұрын

Rubbish? Did you not see in the video how well it performs? I think what you actually mean is that it’s uneconomical to use in the UK because one side of it is for UAT, which is unused in the UK. I would definitely not call it rubbish.

@petewright2283 15 күн бұрын

@@TechMindsOfficial I did and I see better from a FA Pro stick plus, Uptronics LNA. The jet vision aerial is pretty bespoke you used. Heard mixed results with them but vs what I get using a Phil antenna, Noelec V5 and a Uptronics LNA I’m miles ahead.

@mailtopps1 13 күн бұрын

As always, your videos and just superb and you manage to cover everything relevant. Thanks

@TechMindsOfficial 13 күн бұрын

My pleasure!

@LB5JJ 14 күн бұрын

I wonder if I'm the only one that checked Google Maps to see if you just gave out your exact home location 🤣

@TechMindsOfficial 14 күн бұрын

Around 5 miles out :)

@TechMindsOfficial 14 күн бұрын

Or maybe it’s 15 miles :)

@petewright2283 15 күн бұрын

978Mhz is pointless currently in the UK. Let’s hope these are not as sensitive as the LNA make.

@PavloD9 15 күн бұрын

Micro USB in 2024? What a shame

@TechMindsOfficial 14 күн бұрын

I much prefer USB C myself, but I guess this is designed to be setup, installed, and then just left. Who knows :-)

@BalticLab 15 күн бұрын

First! 😀

@TechMindsOfficial 14 күн бұрын

Yes you are!

@Gigler43 15 күн бұрын

How much for you to build one for me?

@cplcabs 14 күн бұрын

why not build it yourself. Its not difficult. Just attach the board to a pi, add antennas and load the software.

@SierraGolfNiner 13 күн бұрын

Big fail on this hat, it doesn't need/use (?) the 40 pin header and *doesn't* pass it through. The pins are unusable. So it blocks all the pins you might want to use for say.... environmental monitoring of the enclosure the pi is in. I love the idea, but this is a big fat Fail on nooelec's part. If you don't need the pins, either properly pass them through or don't use the form factor that blocks the pins.

@TechMindsOfficial 12 күн бұрын

Ummmm.. You can place the HAT at the top of the stack?