Easily making the watch you want, here is my GUIDE.

  Рет қаралды 21,789

watch me with watches

watch me with watches

4 жыл бұрын

Store: www.ebay.co.uk/str/watchmewit...
Instagram: watchmecoll...
If you really liked this video, please consider SUPER THANKING me! Your support will hugely help the channel. The “THANKS” Link to do this alongside “like” and “dislike” buttons etc.
As much as I love watches, I also love to tinker with them! I bought the Pagani Design Yacht-master homage the PD-1651 with the intention to review that to see its flaws, and then modify it to be green!
I have purchased parts from DLW watches before, and felt drawn to them again as I trust the quality.
If you can see past the flaws of this watch and want to buy one, here is my affiliate link. I always review watches fairly (I roasted this watch in standard form) so I don't push them for sale. You make your own mind up!
s.click.aliexpress.com/e/_dVj...
The commission for any sales goes back into the channel so I can keep going!
DLW parts:
www.dlwwatches.com/
The hands fit many Seiko movements, and website states NH35 as one of them. The dial is also stated for fitting this movement. The bezel insert is a perfect fit, and is the sloped Seiko SKX007 bezel insert. There are plenty to choose from.
I really appreciate you watching my content, and if you wish to support the channel, apart from subscribing, check out my eBay shop, as there I have a nice selection of watches and straps I hope you like! Thanks so much.
www.ebay.co.uk/str/watchmewit... The small print: All watches in all my videos are genuine items and not copies or fakes. Homage watches are legal and I just review them. I am careful to use the word "homage" when presenting that type of watch, because that is what they are. All images and sounds used are either my own or used under the fair use policy. Thank you. If you really fancy supporting the channel, consider being a Patreon member! Thanks
/ wmww

Пікірлер: 139
@rogerauclair1670
@rogerauclair1670 4 жыл бұрын
Very nice work indeed and you do make it look so easy. To a lot of people, having the date window is a plus but without the date window it gives the watch symmetry and balance like an older submariner. If James Bond pulled up his sleeve and this watch was sitting on his wrist, it would not look out of place. I’m certainly subscribing to your channel.
@stephenhuber1079
@stephenhuber1079 2 жыл бұрын
Excellent work with such a tedious task! The watch looks fantastic! I love your mod videos!
@gazs7572
@gazs7572 3 жыл бұрын
Just found your channel in the past couple of hours & watched a couple of your mod videos. I’ve since ordered my Pagani & some tools from Amazon. Now i’m looking at Dials, Bezels & hands. I’m gonna for a stealth type look.
@davemck1887
@davemck1887 4 жыл бұрын
Tickety boo indeed. Nice job. Particularly liked the green sunburst dial, only change I'd have made is a thin, straight, Matt yellow seconds hand, eurgh!, I know, but that's what moddings about, making the watch you want with the parts you want. Great content Dan, cheers.
@terryfenner8142
@terryfenner8142 4 жыл бұрын
I have to admit Dan, that was probably the best mod video for this type of watch I have seen, really easy step by step tutorial... great trick with the bezel insert removal.. 👍
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Thanks so much! I appreciate your kind words. I do enjoy teaching as much as I do learning. It's very rewarding.
@dodgydruid
@dodgydruid 4 жыл бұрын
Before I got my cushion, I made one using an old burgundy scotchbrite pad and a Robertson's jam jar lid cutting the pad so it tucked in nicely round the lid's inner lip then I put a bit of glue down inside and bingo bango a DIY cushion that won't do damage if you don't scour it into the pad material.
@karl_m3013
@karl_m3013 4 жыл бұрын
Interesting to learn. Good detailed video. While I would love to make some mods, I am all thumbs and I have very little fine motor dexterity. Going around a corner on a racetrack on my motorcycle with my knee on the pavement, using large muscles.....piece of cake.
@HonestWatchReviewsHWR
@HonestWatchReviewsHWR 4 жыл бұрын
This looks great mate. The only thing I'd change is having a bracelet with end links that integrate a bit better. I'm not a fan of the flat ones that leave a gap. I've still to build up the courage to try modding... The closest I've got is changing out a clasp 🤭
@5675492
@5675492 4 жыл бұрын
I changed the strap on a watch a while back and scratched the case on both sides even though I was trying hard not to do just that. I've been petrified of trying anything since.
@LymanPhillips
@LymanPhillips 3 жыл бұрын
I'm thinking of ordering a sacrificial Pagani to try modding on.
@TheJaapioo
@TheJaapioo 4 жыл бұрын
another beautiful mod.your channel is a lot of fun and educational to watch,well done Dan 👍
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Awesome, thank you!
@nathski22
@nathski22 4 жыл бұрын
Absolutely love the mods you’ve done to this one. I’m so cack handed though I know I’d ruin it. Think I’d be better off taking £150+ and putting it towards a San Martin or similar Hulk homage. Wish I had your steady hands though!
@tuerkben
@tuerkben Жыл бұрын
I watched 2 of your videos and repeated the steps for one of my watches. Success 😁 thanks mate
@colskee
@colskee 4 жыл бұрын
Wicked mod👌🏿. Bought the pagani sub on the strength of your mod vids. Surprised how good it looks out the box though, so may keep as is and do a build from ground up using eBay bits. I can see how addictive this could be lol.
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Awesome thank you!
@goncalotrovao6681
@goncalotrovao6681 4 жыл бұрын
You should do a review of the Pagani Design PD 1645, the blue dial date just homage. Great video btw, cheers!
@brianatherton301
@brianatherton301 4 жыл бұрын
Great mod Dan, Love your vids, keep up the good work, Thanks again.
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Thanks 👍
@simon7218
@simon7218 4 жыл бұрын
Green usually isn’t for me, but I’d definitely wear this. Great job, thanks for posting.
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Thanks for watching!
@deceptor99
@deceptor99 4 жыл бұрын
You changed the most (my favourite) beautiful Pagani 1651 into a monster. LOL
@User90178
@User90178 4 жыл бұрын
Same here. That means I need to buy a different brand. San Martin or steeldive 🙄
@MrPINKFL0YD
@MrPINKFL0YD 4 жыл бұрын
Good to see You use the Seiko bits for this. I'd been thinking about if they would fit. The sloped bezel is a great tip, tnx
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
No problem 👍
@humbukkerz
@humbukkerz 4 жыл бұрын
Lovely mod mate and really informative video 👍
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Thanks 👍
@vosos11
@vosos11 4 жыл бұрын
Good video, keep them coming. Used your code for a steeldive watch at steeldive uk, thanks
@timeintheuk
@timeintheuk 4 жыл бұрын
Paul Blaylock yep did that myself 40 min ago hope you don’t get my watch .lol
@AH-du8ck
@AH-du8ck 4 жыл бұрын
Hi Dan Great channel mate, used your code for a Steeldive sub,came in a couple of days. Ordered a steel bracelet for it though. Cheers mate
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Glad to hear it, nice one!
@williamjenkins9423
@williamjenkins9423 3 жыл бұрын
Top job. You make it look so easy!
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
Thanks!
@IBoughtAWatch
@IBoughtAWatch 4 жыл бұрын
Great looking Mod, should get out my tool kit and get some modding done myself!
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Go for it!
@dieselchris1
@dieselchris1 3 жыл бұрын
Great helpful video. Thank you for sharing 😁👍
@ReetBoaTellThee
@ReetBoaTellThee 3 жыл бұрын
Perfect. Very informative. Thanks!
@StefaanVdV1961
@StefaanVdV1961 4 жыл бұрын
Looks amazing Dan👍
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Thanks Stefaan!
@pb8153
@pb8153 4 жыл бұрын
Great video - thanks for posting
@darrenfry4695
@darrenfry4695 3 жыл бұрын
Looks absolutely pucka , definitely would buy and wear that ..👍🇬🇧
@francisbawasanta6310
@francisbawasanta6310 4 жыл бұрын
I'm doing something similar with a Parnis. It's actually fun tinkering with these cheap watches. So many parts available.
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
I agree, its fun, and if you fudge it, not too expensive to sort out!
@Visitor555
@Visitor555 4 жыл бұрын
Good mod and thanks for info about the things. One thing about the removing the cyclops from the glass, use the lighter after you remove the movement and dial from the case and in that way you shouldnt worry for the watch inside.
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Great tip, thanks!
@Visitor555
@Visitor555 4 жыл бұрын
@@watchmewithwatches no problem man im glad we watch entusiast and modders that can help us, and you youtubers, its very possitive people for watch moding rather than watch snobs who only worry about how much the watch cost and history and not have fun, you know what i mean. Cheers!
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
@@Visitor555 thanks for your kind words. I agree, in this crazy world, it's nice to have a hobby that is positive. I'm realizing there can be negatives in every positive, but I'm doing this to have fun and be creative. Everything I have done in this video has been learnt by mistakes and by learning from others. Thanks again.
@yamancansaraclar679
@yamancansaraclar679 3 жыл бұрын
Very nice vid 👏🏼 but I thought the chapter ring of Pagani and a Seiko dial is not fitting and Seiko chapter rings doesnt fit into the case either. How did you solve it?
@mikerotch6068
@mikerotch6068 2 жыл бұрын
Awesome! I feel inspired
@dodgydruid
@dodgydruid 4 жыл бұрын
Nail varnish remover is just perfumed and coloured acetone, acetone is the dissolver on a great many glues like super glue.
@juniorjohnson5961
@juniorjohnson5961 4 жыл бұрын
Absolutely I worked as a painter for years there making a fortune calling it finger nail polish remover , same with the polish it's just oil based paint !
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
@@juniorjohnson5961 thanks guys! I never knew that until now. I grabbed this as I knew it worked and it was knocking around the house.
@watchalot919
@watchalot919 3 жыл бұрын
That's great, it's just a shame the bezel movement on that particular watch is crap. You made that all look so easy, well done
@VzDkz
@VzDkz 4 жыл бұрын
It's beautiful 😍 How long did the whole mod take you?
@TheJoel1892
@TheJoel1892 4 жыл бұрын
Thank you, this is exactly the video I needed!
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
You're so welcome!
@daniellawson2169
@daniellawson2169 4 жыл бұрын
Gotta say I didnt like the PD-1661 mod but this one is very nice, job well done Dan.
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Thanks for watching, if you were entertained, that is all that matters!
@rhyscourtney8032
@rhyscourtney8032 4 жыл бұрын
A mod well done.... I agree, think the watches looks cleaner without the cyclopes! Will be giving my Pagani a makeover soon 👍🏻, then possibly my skx007 homage
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Have fun! Im doing a steeldive sd1996 (skx007 homage) mod soon. Calling it the Devil Steel!
@rhyscourtney8032
@rhyscourtney8032 4 жыл бұрын
watch me with watches yes sorry I meant my SD1996... just looking for some inspiration 👍🏻
@pierre-adrienlarrieule5862
@pierre-adrienlarrieule5862 3 жыл бұрын
Perfect mod it's a beauty!
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
I think so too!
@WillyMcCoy50
@WillyMcCoy50 3 жыл бұрын
Very nice. I like the size and no date dial.
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
Thanks!
@HeliBenj
@HeliBenj Жыл бұрын
Great video, but on the sequence of events, why remove the cyclops with the movement installed if you're going to remove it anyway??
@LymanPhillips
@LymanPhillips 3 жыл бұрын
I used to go out with a girl named Lefty Loosey. Her sister was Righty Tighty - she never got asked out.
@puiseng
@puiseng 3 жыл бұрын
Hi, do you have experience removing the cyclops lens on San Martin watches? I tried using a blue flame torch and heated the cyclops for about more than 10times, each for about 5-6 seconds, but it just wouldn't budge. If you have l'd like to hear your experience!
@MyAlan999
@MyAlan999 4 жыл бұрын
Think you did a great job , I'm to scared to even open up the back of any of my watches ...... I bought 2 in mind to mod with but don't see me trying anytime soon , maybe one day :)
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
About a year ago, I hadn't even changed a battery. Just give it ago and take your time.
@Darofla
@Darofla 3 жыл бұрын
Can you leave the bezel even if its only aluminium and remove the cyclops or is there a chance the bezel will get damaged?
@esmaillutfi
@esmaillutfi 4 жыл бұрын
Great video man!! I'd love to see more of your mods. Do you know if the dlw dials would work on their 40mm gmt? Thanks
@duckrutt
@duckrutt 4 жыл бұрын
The GMT doesn't use a Seiko movement. It might be a ETA 2893 clone? Or a clone of a clone but those are the dials I'd look at.
@MrPINKFL0YD
@MrPINKFL0YD 4 жыл бұрын
With the 4th hand I'd say the hole is bigger on the GMT. it is easy to make it a little bit bigger with a new small bit by hand if that's tile only problem. If you find an alternative post it. I collect GMT'S and want to mod some. Tnx
@duckrutt
@duckrutt 4 жыл бұрын
@@MrPINKFL0YD The ETA is a smaller diameter movement. The feet and date window won't line up with a Seiko dial. I don't have one of their GMT watches so I can't give you a dial diameter but you'll need to know that too before picking out a replacement.
@yayatsudrajat741
@yayatsudrajat741 3 жыл бұрын
how to open the bezel rotation.?
@juniorjohnson5961
@juniorjohnson5961 4 жыл бұрын
Keep up the good work !
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Thanks, will do!
@trooper427ss
@trooper427ss 4 жыл бұрын
Great job!! 👍
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Thank you! Cheers!
@Ecoat65
@Ecoat65 3 жыл бұрын
Hello Dan. I enjoy your videos very much. Question for you though. I have the exact pagani watch that I will also remove the bezel insert. In two different mod videos you removed the bezel inserts but mentioned you soak the bezel in rubbing alcohol in one video and in this video you said you use nail polish remover (acetone). Could you clarify this for me? Thanks much!
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
Hi, I have had success using both. Whatever is easiest for you to get hold of. Remember to not leave it soaking for too long! Good luck and enjoy
@NeilStirton
@NeilStirton 3 жыл бұрын
Love the mods! Thinking of doing similar.... What size of dial do you need for this watch? No mention of it on the DLW site....
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
Any of their dials will fit a 40mm pagani watch with a nh35 movement
@danwilkinson5239
@danwilkinson5239 4 жыл бұрын
you should put the amazon affiliate link for that lighter in too
@kijntje01
@kijntje01 3 жыл бұрын
Did you ever tried to fit an ETA 2824, or clone like PT5100 in a Pagani watch?
@dodgydruid
@dodgydruid 4 жыл бұрын
Hehe the red plinth of misery... it hates Soviet second hands, quite a few of us Soviet collectors have had problems with the red plinth of second hand destruction lol I bought an all metal set from RedroosterUK which have metal inserts including a nice concave solid pusher for second hands... works extremely well... You should see me getting very sweary with the red plinth on my homebrew Amphibia build video, it destroyed three second hands and the last one I had I put in with a tweezer end, it did the main hands like a champ but not second hands :( I was at the point of chucking red plinth, Vostok bits and everything else at the wall towards the end and had a right ol' rant on WUS forums till kind people soothed me temper hehe
@makaveli220487
@makaveli220487 2 жыл бұрын
Have you a link to buy the tools you used? I've got a pagani and I'd love to muck around with it
@watchmewithwatches
@watchmewithwatches 2 жыл бұрын
kzfaq.info/get/bejne/fd6nlLeDl8mxYZc.html Check the above link out. This video has soooo much info you should find useful. Regards, Dan.
@Historyk_po_godzinach
@Historyk_po_godzinach 4 жыл бұрын
Do you have any idea if I can easly mod a Pagani Design GMT - movement is different but sizewise is it the same? I like it but not so much cuz of that wobbly bezel. How can I alter that to make it more stiff and alligned?
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
The movement would require a dial that is compatible with the GMT movement. DG5833GMT is the movement code. Hands too, as long as they are compatible. I would look at mywatchcode on aliexpress. They sell a wide variety of parts. The bezel adjustment is not something I am familiar with, and adjustment is something I haven't tried yet. Bezel inserts are all I have dabbled in bezel wize.
@chingsok
@chingsok 3 жыл бұрын
Can you change the crystal to double domed on pagani design GMT?
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
If you know the dimensions of the crystal, then yes! Can source one from AliExpress.
@TheMatteo462
@TheMatteo462 3 жыл бұрын
Hey. Did you remove the crown completly? Mine fell off, and i think i have lost one part, but dont know which one. Somethink is definetly missing. I have ring, octa spring and one pin that goes into the hole
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
Hi, the crown and the stem should not come apart from each other. Without having a look I don't know whats happened there.
@Pols_1985
@Pols_1985 3 жыл бұрын
Please tell what is the dimension of bezel and saphire glass in these watches? Thinking of changing bezel and glass on my cermit pagani) Waiting for the guide how to change flat glass into the domed one! Thank you for you detailed guides!
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
Thats a good question, im not sure on the dimensions. Would need to pop the crystal out and measure it with measuring calipers.
@Pols_1985
@Pols_1985 3 жыл бұрын
@@watchmewithwatches make some video about this topic, im sure the others are also interested
@kevinhooper2787
@kevinhooper2787 4 жыл бұрын
What about an oil filled mod ?
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
olive or vegetable?
@alexharris8500
@alexharris8500 4 жыл бұрын
Good looking watch. Nice 👌pagani loom is very bad.
@VNNZTC
@VNNZTC 3 жыл бұрын
Based on your video I have got a Pagani GMT...Very happy with it, but the cyclops is slightly out of alignment....I want to take it right off, is it really necessary to take the bezel off or do you think it would be safe to heat the cyclops with the bezel in place...I could put something heat proof like aluminium foil over the bezel...What would your advice be?
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
You can get away with it, but be very careful as the heat could scorch the white paint in the bezel. I would be thorough. Ultimately taking the bezel out and resticking it would prevent any damage at all. You could buy a new bezel if you want to do another mod from dlw mods. get the sloped skx bezel, they do different color options if you want to change it at all. Use hypocement (or supplied stickers with a new bezel) to restick!
@VNNZTC
@VNNZTC 3 жыл бұрын
@@watchmewithwatches Thank you very much for your reply… You have a new subscriber… 😀😀
@russellwolter5153
@russellwolter5153 3 жыл бұрын
Great video and tutorial. But you really need to warn people not to use that lighter until all of the nail polish remover has been dried off.
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
Thats a great point!
@nyyyard
@nyyyard 3 жыл бұрын
You shouldnvt have used the DLW insert as it is slightly too thick. It's about 1.1mm thick. Most sloped inserts from aliexpress are 0.6mm and fit seamlessly into the bezel...
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
I think from now on I will do that. A lot cheaper too!
@nyyyard
@nyyyard 3 жыл бұрын
@@watchmewithwatches I imagine all the parts come from the same factory anyway!
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
@@nyyyard I think you are right mate
@jz4087
@jz4087 4 жыл бұрын
Hey I haven’t seen a cadisen submariner watch review on KZfaq yet. Can you make one?
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
I'm tempted to take a look at one....
@edm2031
@edm2031 4 ай бұрын
What size dial? Thanks
@watchmewithwatches
@watchmewithwatches 4 ай бұрын
28.5mm
@richardseth.
@richardseth. 3 жыл бұрын
Finally you turned a black watch into a green one ... should hv bought a green one from pagani in the very first place...
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
At the time of modding this watch the 40mm green pagani didn't exist.
@mercster
@mercster 2 жыл бұрын
Hey man, all I wanna do is remove the cyclops on a Pagani I have. I do wanna remove the bezel first so as not to damage it when I'm applying the heat. I saw you remove the glue with the acetone, but then when you apply your new bezel, I didn't see what sticky stuff you use. I will just be re-applying the same bezel it came with. Hope you can help, thanks for the video anyway.
@watchmewithwatches
@watchmewithwatches 2 жыл бұрын
Hi, the glue is hypocement, great stuff. 👍
@mercster
@mercster 2 жыл бұрын
@watch me with watches I'll prolly glue the damn bezel so it doesnt turn anymore 😂 Oh well, we'll see. I found some of the hypocement on the web, thanks for the reply.
@mercster
@mercster 2 жыл бұрын
@@watchmewithwatches It looked like you were using some 3M sticker thing so I wasn't sure. That part of the video kinda cuts back and forth.
@watchmewithwatches
@watchmewithwatches 2 жыл бұрын
@@mercster a pleasure, need any more tips ask any time.
@watchmewithwatches
@watchmewithwatches 2 жыл бұрын
@@mercster you can use 3m disks,but hypocement is actually easier! 👌
@BoogurTWang
@BoogurTWang 3 жыл бұрын
Ticketey-boo to you too.
@BrendanCS
@BrendanCS Жыл бұрын
Are Paganis actually worth buying as a wearable watch? Are they worth buying but at the cost of your soul? Or are they not worth it at all but maybe to mod?
@watchmewithwatches
@watchmewithwatches Жыл бұрын
It didn't quite cost me my soul. I already spent that on all the clothes I wear hand made by children in Vietnam.
@TheRutlandPilot
@TheRutlandPilot 3 жыл бұрын
Stating the obvious here but you've just made something you could have bought off Amazon. They sell Hulk Pagani watches? Great video though and I have subscribed. Really interesting.
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
I like building watches, and putting parts on I know to be great quality. The main reason is fun though!
@charlesdegaulle28
@charlesdegaulle28 3 жыл бұрын
The only problem is you get charged for the watch but you don't get the watch.
@davidbaird1898
@davidbaird1898 4 жыл бұрын
Best part? You got rid of those fugly Mercedes hands! Well done.
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
Its the least I could do! There are so many other designs out there to transform the look luckily!
@leoberg2390
@leoberg2390 3 жыл бұрын
Not a big fan of straight cut end links
@watchmewithwatches
@watchmewithwatches 3 жыл бұрын
Ive found a nice rubber strap that fits these perfectly
@piquetuk
@piquetuk 4 жыл бұрын
Noice.
@tacotactical986
@tacotactical986 4 жыл бұрын
How did you know that the SKX bezel insert would fit this homage watch bezel?
@watchmewithwatches
@watchmewithwatches 4 жыл бұрын
I did a lot of research first, measuring, looking around forums etc. Then to save you all that same depth of research, just presented the results! All in the name of being helpful.
@tacotactical986
@tacotactical986 4 жыл бұрын
Haha thanks for that.
@FOURTEEFIVE
@FOURTEEFIVE 3 жыл бұрын
I never liked hulks but after watching this I need one lol
@shaunnewman4237
@shaunnewman4237 3 жыл бұрын
Dude, they’re called finger cots. Jesus.
PAGANI DESIGN PD-1651. I create my own adventure watch! Come see how...
20:53
watch me with watches
Рет қаралды 14 М.
One of my FAVOURITE MODS!
21:38
watch me with watches
Рет қаралды 30 М.
Jumping off balcony pulls her tooth! 🫣🦷
01:00
Justin Flom
Рет қаралды 16 МЛН
Finger Heart - Fancy Refill (Inside Out Animation)
00:30
FASH
Рет қаралды 27 МЛН
I Built my DREAM Watch from AliExpress
17:02
Elliot Coll
Рет қаралды 773 М.
Is The Casio 'SubmarinOak' The WORST Mod Ever?
7:05
Just One More Watch
Рет қаралды 54 М.
Top 10 Pagani Design Watches! (And 4 To Avoid......)
15:26
Just One More Watch
Рет қаралды 343 М.
Adam's New Modded Seiko Watch!
12:11
Adam Savage’s Tested
Рет қаралды 339 М.
Watch Modification Guide. I use Pagani Design PD-1645 to show you how...
29:21
watch me with watches
Рет қаралды 17 М.
I fully modify the Pagani Design PD-1661. HOW did I do it?
29:17
watch me with watches
Рет қаралды 85 М.
Build-Your-Own Retro Stunner For Under $100!
12:01
Just One More Watch
Рет қаралды 334 М.
Regulating A Seiko And Pagani Design As Accurately As A Rolex?
21:08
VOSTOK MOD GUIDE. My little "how to" guide for Amphibia modifying.
16:57
watch me with watches
Рет қаралды 21 М.