Thanks for the feedback and support albert. Thanks some big wood. Hopefully we meet up sometime

Howdy neighbor. Grew up at the south end of the northway. Now an hour or so west.

I'm sure hes gonna be able to help lots of people out with it. Buckins a great guy

Sounds like you are one of them guys as well, thank you

Yep that would be a good one. Will try and get it in the next couple of weeks

I wrangled him in pretty good. Thanks for the feedback and support gord

He showed up at the wrong time lol. Thanks for all the feedback and support karl. It's very much appreciated

Thanks for the feedback. I think I'm going to do a video on that just so guys are aware of it. Once I get down that far I will normally roll the round onto its edge.

Can you tell me how it bent the return arm? Just curious.

@@jeremygibbs6939 Yes. When pushing a large round, there is a piece of angle on the pull back arm to help support it. Those large rounds hit that angle iron when pushing blocks through. It bends the arm back over time. Any rounds over 32 inches or so you have to be careful with. I had to weld in some extra gussets for extra support.

@@wvwoodman9280 thank you for that informative response. I’ll try to watch out for that on my machine when it arrives.

Lol thanks for the support dan. Really appreciate it

Thanks tim. I might try and get some merchandise over the next couple of months. Thanks for all the support I really appreciate it

White oaks a different animal all together. We really don't get a lot of it up here. Great to hear from you roger. Looking forward to splitter wars

Thanks for all the support jason. Really appreciate it

Might be worth doing. Get asked about it alot.

I already talked to Gerry about some items

Thanks dave. I think you're right on with the size. Really appreciate all the support

Thanks for the feedback and support. really appreciate it.

Thanks for the feedback and support. Really appreciate it

From first-hand experience, I can say you are ABSOLUTLY right.

Thanks colin. Did you ever get ahold of ian Gregory?

Its heavy stuff to work with. The box wedge make it a lot easier. Thanks for the feedback Steve

Thanks jim. Really appreciate the feedback

Heavy stuff to work with. Thanks for all the support steve.

Yep I could do that. I have one for the 22-28. Just need to piece it together with the 12-22. I should still have the videos

Yep I will for sure

I googled firewood measuring stick and found Baileys Outdoor sells them in a 3 pack for 12.99. 14,16, and 18". Hope that helps.

Thinking about having a store online. Get asked a lot about it. I think you'll see it in the future. Just not sure if we what to throw another iron in the fire yet

You should include one with a splitter I ordered a ultra for spring would love a sweat shirt

Makes good sense. Thanks for all the support mike. Really appreciate it.

It's pretty close. Especially with bucking Billy at the foot pedal!!!

Hhahahahah I will run that by him and see what he says.

I saw Gerry push a wheelbarrow almost a mile with a 6 way wedge in it for a few beers.. Careful what wish for !!haha

The first clip with the piece of maple was the 12-22. Had it all set up and realized it had a 5 way box wedge in it lol.

Just want to feel good about my purchase thats due in March

@@IronOakSawmill you wont be disappointed

If you are looking for some videos of the 12-22 check out hometown acres. Adam has a few videos of the 12-22 with the box wedge.

@@brandonpaul5712 watched all of them. Still looking for more. Thank you for the tip though.

Coincidence maybe?

Gonna make life a lot easier for you guys mike

What kind of lead time for a 12-22? I have a few points to get in line like a dump trailer, splitting location and a load of logs. If it’s profitable venture I would love to get into doing firewood as a side business. I do also have a possible buyer from a camp ground that might be interested in. Using me. Any tips?

@@S_man89 you would have ask Andrew that, as far they are out on build time and delivery but as far as is it being profitable yes but a lot does go into it. Lots of things can make it not profitable fast. Getting a Eastonmade 12-22 and a conveyor is a great investment in a firewood business but make sure you have a good demand and a better supply for that demand.

MJM Tree Service & Maintenance thanks. I figured I wouldn’t get the conveyor until I had the orders coming in where I needed the autoloading. We have a lot folks out here by me that burn wood for heat and pleasure. Bu most of the guys I see that sell it I don’t see a lot of them delivering it, it’s usually come and get it kind of thing. We also have a few koa camp grounds that I would reach out to and try and get a fire wood contract. Plus at my current employment I could inquire about selling from our store ( we sell building material) so we get a good selection of possible buyers guys for heat and the weekend folks for pleasure. During the summer our town is a tourist place so there are a lot of vacationers at their lake homes so I would like to offer something to compete with the “bundle of warmth most places sell” which in my opinion not very good wood. But thanks for listening to me. I love doing this kind of thing bucking rounds and splitting. 😁

How much does one of these machines cost? I think it's worth it

Yep no problems picking up big rounds. Thanks for the feedback and support tom. Really appreciate it

Lol tell harvey I said hello.

Sure will

We always do 16". Normally works out to even length pieces in 8' wood.

Lol

Elms probably the worst. We have lots of videos of it if you look. Thanks for the feedback

Normally take $500 down and then the balance before it ships. We are booking into may right now

Eastonmade Wood Splitters I’m glad that you’re that busy. I still see one of these in my future.

Lol I knew what I was I'd give it a shot for you. I'm really handy with wrenches not so much a camera or computer.

@@EastonmadeWoodSplitters not sure about the new GoPros but I think all you have to do is go to settings > resolution> then tap the 4:3 in the upper right hand corner ... should toggle to 16:9.. boom done

@@AndreasvonT will give it a shot

Yes. Have had it for a couple of years. Seems to work well for me.

@@EastonmadeWoodSplitters yep. I have one too. Great saw. One of the best power to weight ratio saw ever made. Thx for your videos. Really enjoy them. Your splitters seem top notch.

@@aj12271 thanks for the feedback and support. It's very much appreciated

No worries dave. Really appreciate the feedback and support regardless