Easy 10 Step Guide to Rotary Engraving - CO2 Laser on Glass - Omtech / Ebay / Chinese Laser
Рет қаралды 3,952
Жыл бұрынWant a step by step guide to engraving on glass (or other media) with your rotary device? This is a simple 10 step guide on how to get repeatable results! It's not too technical, but I do go into details that will help you through the process and provide plenty of tips along the way!
Here are some products I use everyday including the link to my custom rotary clamp:
4 Wheel Rotary Clamp - bladesandbeams.etsy.com/listi...
Laser Focus Tool - bladesandbeams.etsy.com/listi...
Placement Tool - bladesandbeams.etsy.com/listi...
Honeycomb Holddown Pins: bladesandbeams.etsy.com/listi...
Chuck Rotary Jig: drive.google.com/file/d/17NyE...
4 Wheel Rotary Jig: drive.google.com/file/d/19Vst...
_________________________________
Amazon Associate Links Below
__________________________________
AC Infinity CLOUDLINE S6, Quiet 6” Inline Duct Fan with Speed Controller: amzn.to/3WwTVff
AC Infinity Flexible 6-Inch Aluminum Ducting: amzn.to/3Ywe4Uu
AC Infinity Wall-Mount Duct Grille Vent for 6-Inch Ducting: amzn.to/3PGdTSn
Other useful items:
ForPro 99% Isopropyl Alcohol (IPA): amzn.to/3BKyH5I
Premium Grade - Deionized Water - 1 Gallon: amzn.to/3W0Lskx
@pstimm
Hey Rick, Thanks for all the great and useful information as always. I am starting the process of engraving tumblers. can you address how you stabilize the honeycomb bed for accurate placement of the rotary jig? My bed always seems to shift around when moving the rotary in/out of the machine. I'm using an Omtech AF2028-80w machine with a 4-wheel rotary. Calibrating actual positions with a sliding bed is frustrating. Do you have your honeycomb screwed into place for consistent laser positioning?
@hectorgiraldo2010 Жыл бұрын
Great and well explain video
@marcioaar1985 Жыл бұрын
hi, great video, but the links are not available
@dinaw3403
What wattage is your laser for this project? What did you focus at and was the air on?
@Krusermissile
I'm trying to engrave on the same type of glass. Do you have the machine settings available to download?
@vickymendez782 Жыл бұрын
Hi, what lense do I need to engrave glass? Like whiskey or beer mugs
Directed T3CH
Рет қаралды 11 М.
Family Games Media
Рет қаралды 18 МЛН
Directed T3CH
Рет қаралды 1,9 М.
MimoWork Laser
Рет қаралды 24 М.