Easy $40 Garage Tote Storage Hack! Fast, Cheap, Quick Project Source Commander and HDX bin storage

Рет қаралды 562,980

2 жыл бұрын

The StudBuddy Magnetic Stud Finder: amzn.to/3sPuFEx
27 Gallon storage bins pack of 4: amzn.to/3wBSNwz
Single tote: amzn.to/3lAbB9m
Construction Screws: amzn.to/3Ih9DqN
Do you want a cheap solution to hang either your Lowes, Home Depot or other big box store bins? We have the fastest, cheapest method of hanging these bins to save space, organize, and make used of wasted garage ceiling space. These yellow and black storage tubs are affordable and everywhere. The problem is that they take up space in the garage or shed. In this video, we show you what materials to buy and with minimal hand tools hang these bins sky high and out of the way, thus alleviating clutter. If you came here for a storage solution hack, you found it. You can hang 6, 27 gallon bins for $40 or 12 for $80. Make sure you know that the Lowes bins and HDX Home Depot bins are different widths, so that needs to be considered when building this. You can use both, just space the I beam rails accordingly.

Пікірлер: 258

@handymanhoney-do6881 Жыл бұрын

A couple of ideas: 1) label the undersides so you know what bins you need before you are on a ladder. 2) if you have kids you can stash birthday/Christmas gifts up there so they aren’t found 3) stud mounted eyelets and ratchet straps are a worthwhile effort to keep the bins from warping/sagging/falling. 4) leave one empty space so you can shuffle a front tote to another row to access one behind it. It saves a loaded trip up and down the ladder. 5) Really paranoid of falling totes? A very basic U-shaped frame around the totes would provide a “safety net” for falling totes and give you a place to put long, slender items (rakes, ladders, pvc, etc). 6) this is 100% a time to use wood glue or construction adhesive on all joining surfaces.

@collinwiedel Жыл бұрын

Very smart. Will be taking this into consideration when I build these for myself!!

@Finraen 11 ай бұрын

I like the eyelets and straps idea. I wouldn’t ever do this without bottom support because I’ve seen how time and weight combined can warp these tubs.

@Kboi1992 11 ай бұрын

No one asked for ideas.

@handymanhoney-do6881 11 ай бұрын

@@Kboi1992 true. Also, no one asked your opinion either. I guess we’re both cunts.

@CamsFinds 10 ай бұрын

how miserable are you? @@Kboi1992 😂 do you really feel better after commenting this?

@yergyddub 11 ай бұрын

Never knew I needed to hear Emperor Kuzco give me DIY tips but I’m 100% here for it

@penelope5534 Жыл бұрын

I just went looking for diy garage ceiling storage and I'm really excited about the simplicity of this. Thank you!

@brucejamesj Жыл бұрын

I'm just going to say this now - this is brilliant! I've been struggling with what to do with all the bins. And now I know.

@AdedoyinOyelaran Жыл бұрын

I mean .. duh!! This is great inspiration. We were swimming in plastic totes from years of moving for assignments. Now that we are stationary, this is just the ticket and it beats tossing the totes. Thank you for this inspiration.

@MATLOCKE269 Жыл бұрын

Thanks for the tip! Installed this last night, $42 including screws. Mine holds 6x 27 gallon storage bins… plenty of storage to clean up our messy garage. Thanks!

@danialhowe9814 11 ай бұрын

TIP: if the bottoms start bowing you can always drop in a 1/2 mdf board on the bottom to spread the weight

@billszymborski584 Жыл бұрын

My wife saw the commercial version of this and wants it bad. I am too cheap to spend $39 (3 totes) to $449 (13 totes). So I started looking for DIY alternatives. Yours it the first I found and now I am done looking! Great idea and video! Thank you!

@sarahwallace7554 Ай бұрын

Sam's or Costco has these sometimes for $20

@PR1MUS14 Жыл бұрын

4:15 Out of everyone to include a small clip of, I appreciate this one. This guy makes entertaining and wholesome content.

@JLange642 Жыл бұрын

Well done video! Glad I'm not the only one using the "tennis ball on a string" parking stop gauge!

@Daymond777Gaming 6 ай бұрын

This is why I love KZfaq, thanks for the content

@brianmyers1429 6 ай бұрын

Love seeing the Woom 1 on the tool box. Best bikes ever. Great video as well!

@darkskinamerican7826 Жыл бұрын

I love this idea so much! I showed this video to my wife and she’s making me do this in our garage. Thanks for the video!

@obijuankenobi420 Жыл бұрын

"Shes making me do this"......I felt that

@deanle604 Жыл бұрын

Don’t even think about this. It will drop on your head. Bin will be breaking down after timing. So dumb guy

@riodejaneiro4793 Жыл бұрын

@@obijuankenobi420 ... in the garage!!!

@UncleFester2240 8 ай бұрын

This is "Archimedes-like Next-Level Genius" stuff. It's beauty lies in it's simplicity. High marks, best storage idea I have seen in a long, long time.

@emanuelgonzalez2570 Жыл бұрын

So simple, it's genius!

@jorgenvonstrangle000 Жыл бұрын

I just moved into my new home that was just finished recently. I will definitely do this since my attic can be really only hold a few things

@ryanjordan1083 10 ай бұрын

Installed this today. I did 2 racks for 6 bins and plan to add another layer for 12 bins. Cool hack i found while doing this alone: once you build the ibeams, you can measure the studs on the ceiling and match the screws to those spots and pre-drill them into the ibeams. That way, you dont need to deal with any loose screws while youre up on the stepladder and holding a big piece of wood.

@sargekowalkowski8572 Жыл бұрын

Just set ours up! Thanks!!

@mrjdiaz1 Жыл бұрын

Great instructional video btw!! Thank you

@jwoods2215 Жыл бұрын

Thanks for the tutorial! Awesome!

@jesterc.6763 Жыл бұрын

I love the ball hanging on the ceiling. That's an amazing idea.

@ottopilot7205 Жыл бұрын

Added 4 rails todays. Thanks for the guidance

@ModernGreaser Жыл бұрын

Glad it helped!

@vocalone23 Жыл бұрын

I really appreciate this DIY👍🏽

@thekevinhu Жыл бұрын

This is fantastic. Thank you!

@JosephHoolihan Жыл бұрын

Bro this is hilarious... and useful. Subscribed AND will be building this soon. Thank you, Sir!

@CC-nt4zi Жыл бұрын

The parking string+ball is low tech brilliance

@lawrencetisdall9850 Ай бұрын

This was AWESOME Video !! Thanks So much

@wtdudley05 Жыл бұрын

Great build/video

@Bignene628 Жыл бұрын

Great video man

@leem1999 Жыл бұрын

Great video!

@txguynnh 8 ай бұрын

Great idea absolutely!

@MikeGilroyAK Жыл бұрын

Thanks for the video! Sweet truck!

@ModernGreaser Жыл бұрын

Thanks. That spot used to be reserved for my 65 GTO 😢

@hackthehoneydolist 10 ай бұрын

great idea! thanks for sharing.

@johnbaron1639 2 жыл бұрын

Great idea! I will be definitely doing this.

@ModernGreaser 2 жыл бұрын

You'll need some more bins to store things after attending another "crap-tacular" give away party at our house.

@wayne8268 Жыл бұрын

simp

@wayne8268 Жыл бұрын

simp

@tomfrantz Жыл бұрын

Thank you

@CavanalK5 2 жыл бұрын

Very nice. I did mine a couple years ago with 8-footers using all 2x4s. Ahh, the good ole days when it was under 30 bucks for deck screws, a dozen 2x4s. I spaced mine where the totes go in with the wider side facing the opening. 8 foot I-beams allowed for 5 totes. So 15 totes total. I was able to do this above where my garage door is when in the up position. And the I beams butt up against the side wall. I put my heaviest totes at the end nearest the wall. And the commonly used and/or light ones like holiday decor nearest the open end. I was cruising KZfaq because I want to do another set and was looking for improvements. Yours look great so I’m going to steal a few tips from you. Especially since lumber is much higher now lol. Take care!

@srooster4410 Жыл бұрын

how are the totes holding up after a few years? i want to do the same just worried about longevity..

@CavanalK5 Жыл бұрын

@@srooster4410 so far so good. I have a couple that were on the heavy end of the spectrum. Old DVDs, CDs, printer cables,etc. It was a bear to get up there with my 10’ ceiling. The bottom bows a little bit no cracking or anything. I put those farthest back in the rows, and they sit closest to the outside wall. I was thinking that the rafters were probably strongest nearest the walls. And also because this isn’t stuff I’ll get into often and I don’t want to have to move it to access lighter and more frequented totes. But yeah, couple years on a couple heavy dudes and they’re good. These were the Home Depot HDX brand 27-gal totes, black with yellow or red lids. They typically go on sale a couple times a year. And they’ll have a ton of them stacked all over the store. They get down to about 8 or 9 bucks apiece sometimes. Good Luck in your endeavor 👍🏼

@jayneb9383 Жыл бұрын

Pictures please.

@CavanalK5 Жыл бұрын

@@jayneb9383 ummm....this is youtube, not facebook. There is not a way to post pictures, sorry.

@ModernGreaser Жыл бұрын

Nice!!! Glad to hear this worked out for you in the past and present!!

@sherrielocke9367 Жыл бұрын

Thank you!

@xianftw4806 Жыл бұрын

These are at least 1x4s. Look at them next to the 2x3s in the truck. I bought 1x3s without giving it a lot of thought and it looks like I’m going to have to plane down the 2x3s about 0.5” to give enough room for the lip.

@alex5710 9 ай бұрын

This comment should go to the top. Thank you for confirming my suspicion.

@JL-nb3dh 2 жыл бұрын

Ingenious! Much cheaper to diy. Bummer about William having to sell his 2nd ambo. He really seemed to whip through the first one. Dude! I was wondering who that bearded guy was in your video. You look like a completely different person!

@ModernGreaser 2 жыл бұрын

Agreed, William would have done an even more amazing job on the second ambu.

@davidz1681 Жыл бұрын

Damn that's genius

@NooneStaar 2 жыл бұрын

Will be cool to see videos on the Lexus! Been working on one my dad has given me, already figured out how to get the keyfob hatch button to work (button under the glove box) and de-oxidized the headlights, next step is figuring out the ventilated seats, dash cam install, and why the button on the underside of the tailgate doesn't work lol

@ModernGreaser Жыл бұрын

If you go to my channel “modern greaser” I have 4-5 videos on the Lexus.

@danielwheeless6147 Жыл бұрын

I think you mean 1x4s. Even the SKU you referenced from The Home Depot was a 1x4. I actually did this last weekend, with 1x4s, and highly recommend it and thank you greatly for the video. I saw this same concept sold in metal for $500 and called BS as it shouldn't cost this much.

@Thebonezman Жыл бұрын

Glad I read your comment before buying lol

@logistician1376 6 ай бұрын

Wish I would have read that prior 😂 I am going to have to swap out 1x3s for 1x4s now 😅

@flyhelo60L Жыл бұрын

Brilliant

@FreeSpiritMom 2 жыл бұрын

This is genuis

@silverbulletcapitalllc Жыл бұрын

The "Fur"thest end. No pun intended.

@user-xx3jm2xv4e 10 ай бұрын

What is the weight limit you recommend for the bins when suspending from the ceiling? I imagine the plastic sidings will have a breaking point. Great hack- thanks for sharing.

@joe_ferreira Жыл бұрын

The Costco version of these totes are on sale for under $10 atm

@-byko-8423 Жыл бұрын

This is fun and easy when the containers are empty....

@RichardT2112 Жыл бұрын

Curious, what type of weight can you comfortably put in each tote? Curious as you only have a few screws holding them up.

@nawlsone586 11 ай бұрын

Genius

@dawoof6 Жыл бұрын

Great video! I am wondering if this will work in the heat of south Texas. I'm worried the plastic will soften/warp allowing them to fall.

@MAGAMAN Жыл бұрын

I would not do this out here... Or anywhere, to be honest. You could damage your ceiling (rafters, joists, etc.) because they are not designed to hold up anything other than your ceiling. If the joists fail, or the plastic fails you can not only damage you car, but also damage your kids or pets. Those things are designed to be stacked, so stack them high. Put a bungee cord around the top of the stack to keep them from falling over and you are done.

@gugy68 Жыл бұрын

Pretty smart. But like you said, it can't hold too heavy objects. I wished I had a flat ceiling garage.

@bobbybobman3073 11 ай бұрын

Got it, take one of those tubs and fill it fully with ammo and depleted uranium, you know to keep everything nice and light in those over head bins.

@MarsellusWallace2024 10 ай бұрын

I’m doing the same thing, but hanging the bins in pairs so I don’t have to drag several off to get to one on the end

@markp.7165 Жыл бұрын

Looks good but I am not sure I want those hanging over my car. Maybe that is just me but I would have to give it some thought.

@duazido Жыл бұрын

If Special Counsel Jack Smith ever needs a body double, you're the man. You look much younger of course, but he may have a more stressful life.

@troyhenry3267 Жыл бұрын

I'll be following your how to video on this when I do this exact project in my garage. What length screws did you use to attach the track to the ceiling joist?

@ModernGreaser Жыл бұрын

2 1/2” would work, or 3” construction screws.

@CichlidCharmer Жыл бұрын

This is a fantastic idea, and your witty commentary during the video is very entertaining and funny! At the end of the day, I will have milk, btw. Thank you very much!

@gjohnston281 3 ай бұрын

It would be fun pitting the boxes up and down that high if there was any amount of weight in the boxes , other than not a bad option for light boxes , your back will love you

@SteveBroc69 Жыл бұрын

HELL YEAH!!!

@Whflynn3 Жыл бұрын

Wondering what kind of weight these hold. I've seen the metal grate ones that hold a few hundred pounds. Really don't want to see a huge dent in the nissus's car roof

@Kai9386kea Жыл бұрын

Would put a piece of plywood on the bottom keep it from bowing?

@coffey1718 3 ай бұрын

It is hilarious people are spending so much on the stupid tiktok ceiling ones when these are sooo cheap and sooo easy and look way better.

@mwlebbin 5 ай бұрын

Have you had wasp issues on the gap in the first rail?

@KT-fi7tm Жыл бұрын

Pay the extra 0.50-1$ for 1x4 pieces. The 2x3 arent always straight/true. And if youre putting them side by side you need all the extra wiggle room you can spare on the sides.

@Eatonph 10 ай бұрын

I agree with this, and wish I would have measured before I ripped down my lumber. 1x3 with a 2x in the center is not enough support in my opinion. I'll be ripping down three 1x4 tomorrow.

@Casmige Жыл бұрын

I would think that 1” x 3”s all the way around including for the middle would work just as well strength-wise as long as you pre-drilled & staggered the “I-beam” fastening screw holes.

@hickorys_tiny_farm4861 Жыл бұрын

I was thinking the same

@sidsid9808 Жыл бұрын

1x3 for the middle part will be rather weak, 2x3 is much safer there

@Casmige Ай бұрын

@@sidsid9808 what if…. Predrilled holes & those nice 6”collared structural screws through the bottom plate through the middle-support & even [possibly] eliminate the top plate/rail?. Would just be inverse upside down “T”…keeping the 2”x3” middle support.

@bernardomaldonado6388 Жыл бұрын

I have the hanging shelf from Costco and they are ok but I feel like it’s a waste of space. This is a way better way to organize.I’ll be removing the existing shelf Definitely doing this.

@jbrictor 7 ай бұрын

I agree. I have a few of the metal racks hanging from my garage currently, but my ceiling isn't high enough for what I want. And it makes getting bins from the back harder than this will be. I will definitely be doing this soon.

@87elnetta 2 ай бұрын

I felt out at "Judy Booty" and then we saw it! LMAO!

@kalboJeff Жыл бұрын

How much can these joist support? I’m scared that it will come falling down.

@juangalvan8760 7 ай бұрын

Im wondering if it can hold craftsman 40 gallon totes?

@beerpickles62 Жыл бұрын

Welll it’s the holidays now..what size screws and nails did you use or what do you think works best for the ceiling and the I-rail? Thank you,

@ModernGreaser Жыл бұрын

2.5” construction screws will suffice.

@bronsonstephens5799 Жыл бұрын

So did you just toenail the screws into the joists? I don’t see how you’d be able to get the screws in if they weren’t screwed in at an angle.

@sandrarodriguez936 Жыл бұрын

Hi, how much weight can this set up hold? We got the Costco containers with your measurements will still work for those? And what if I wanted to slide them wide wise instead of long wise? Will this affect the set up or will the break easy? I hope I make sense… and I hope you can answer me soon I’m planning on doing this this week… thank you!!

@ModernGreaser Жыл бұрын

Sorry for the late reply. Sideways May work, but the bins could deflect (bend). The weight is contingent on the bins as the bottoms sag before anything else looses strength. I’d say mine hold up to 50lbs+

@lizetteabundes3291 Жыл бұрын

Thank you! I’m doing this this evening! Can you verify if you used 1 x 3 or 1X 4 for the furring boards? After reading some of the comments I’m a little uncertain. I supposed it would work either way as long as it fits the lip is long enough to use the bins I’m using I’m just curious if it affects the weight it’ll hold. Thank you !!

@ModernGreaser Жыл бұрын

Its 1x4 furring, they are smaller than the 1x4 dimensional as well as cheaper. You can use 1x4 dimensional. They’re just a bit more expensive. Both are fine for strength. I teach carpentry at a vocational college, so trust my word. I misspoke and called them 1x3’s…

@nicholasmarkowicz9168 9 ай бұрын

Reading this as I went to the store and bought 1x3’s….

@urmastertech 11 ай бұрын

I just started creating this and man did my local store, Menards have terrible wood. Majority of the 2x3s were bad, but I found 3 that were okay. But I bought the 1x3 furring strips and noticed that they are very narrow width wise. If it matters I bought the pine ones. These were $1.98 after rebate each. I'm hoping these will work for the bins at least the first 3 rows I create. If I decide to create more I would probably go with 1x4s.

@ModernGreaser 11 ай бұрын

Good call. I teach carpentry at the college level and my prediction is the plastic bins would fail before the wood does. 1x4s would be an upgrade. Shout out to Menards, I worked in the lumberyard for 6 years in IL & WI!

@urmastertech 11 ай бұрын

@@ModernGreaser I was thinking that too. But who knows I'll finish up these and see how they hold up. I probably will end up building supports too. Nice! I'm in Minnesota with 3 Menards all within 15 mins from me, so it definitely comes in handy. We have multi Lowes and Home Depots too, but I prefer Menards too esp with their sales and 11% off and usually cheaper than everywhere else.

@ryandaley1270 2 ай бұрын

"Just screw the stupid thing to the ceiling, call it a day, go drink a beer, or milk, whatever you drink.." 😂 4:09

@blipblop92 Жыл бұрын

Nice setup but it could really screw up somebody shoulder trying to get them down

@commoncentsamerican 11 ай бұрын

5:50 "Target" Bag" ..................................................... That explains alot

@Hundo_Mo 11 ай бұрын

Love the idea. My only concern is if the tubs give out over time and warp. If they warp from weight will they still fit (and stay up) in the racks

@ktcoll 11 ай бұрын

That's my husband's worry too, so we were wondering how much weight you can put in there without warping.

@ModernGreaser 11 ай бұрын

Two years and no issues.

@ModernGreaser 11 ай бұрын

There is plenty of space for room on either side. I park two hot vehicles that drive around in 110 degree heat and all is well.

@joeminpa6705 Жыл бұрын

... not comfortable with the connection to the joists. Nails no way - maybe for a few years, but for the long haul, nah not comfortable with that. Could strengthen the "I" beams with glue first. this would be best in an unfinished ceiling installation where you could put a horizontal bolt through the joist with some kind of vertical bracket for better attachments.

@haydengarrison5896 10 ай бұрын

How much weight with they sustain???

@mrjdiaz1 Жыл бұрын

Would placing D-ring shackles on each end and using a ratchet strap to hold in that middle part of the bins help?

@MM-fe9mz Жыл бұрын

Definitely would be good to ensure nothing falls on the car below.

@handymanhoney-do6881 Жыл бұрын

I think that’s the best ‘peace of mind’ idea. It’s meant to store medium-weight seasonal items/decorations so they only come down once a year. I could imagine the totes softening and sagging in the peak of summer and suddenly your $40 tote racks cost you $1600 in car repairs.

@SkyDawgTommy 3 ай бұрын

I always see things like this and wonder whats with weight limit? Just wondering not trying to be a downer

@abinjacob2104 Жыл бұрын

W video

@audiovideophile5317 11 ай бұрын

With the weight in many on my bins I would in no way trust holding it by two edges. Not to mention having to remove all the ones in the front just to get to the last one. The wire racks that attach to the wall are just as cheap and far easier to put together and install. Mot to mention you can use any bin or box size. I have them on both sides of my garage high enough you can walk right under them and also also have several of the ceiling ones at the garage end that you can still walk under but hang low enough and support enough weight you can stack 2-3 bins high along the whole back wall. I could have installed more but none of them are over the cars so (mostly) safe from drops if it ever happened.

@TzUuup 19 сағат бұрын

Yeah I'd prefer to go that route as well but this is super simple too

@Wooster77 Жыл бұрын

You just screw them into the ceiling drywall, without anchoring them to the joists /rafter ties above the drywall?

@ModernGreaser Жыл бұрын

Nope. Watch the video. I used a stud finder and anchored them to ceiling joists.

@RoastyToasty145 Ай бұрын

Lmao bro this video is funny and informative! You said you can do either who cares?!?!? 😂😂😂😂

@troytemple74 Жыл бұрын

Are you running these I beams in the same direction as the joists or perpendicular?

@ModernGreaser Жыл бұрын

Perpendicular, but you could run them parallel if you added perpendicular cross runners made from 1x4’s

@Doitology 2 ай бұрын

cool idea. but my garage ceiling is 12 feet high. There's no reasonable way for me to put bins up in place or get them down without a ladder. :/

@BOBBY-et9xb 2 жыл бұрын

How long will that I beam hold with all the weight of the filled bins

@ModernGreaser 2 жыл бұрын

I have a sinking feeling the bins, being made of plastic, which are not designed to be held in this fashion will give way first, especially if overloaded. It would be better to use plywood instead of furring strips, but since you can’t load too much weight into the bins, I’m confident the wood will hold up. I teach carpentry at a tech college, so my opinion should be somewhat educated on the wood longevity. Good point though, as I thought the same thing. Guess we’ll see! If it breaks, I’ll post an update haha

@srooster4410 Жыл бұрын

project farm did an video on the force it takes to pull a screw out… if he’s got more than 2 screws in each beam it’s gonna be just fine.

@ernestoaparicio7281 Жыл бұрын

That gap between the first "I" and the wall just have my fear of bugs and anxiety triggered. Great video though.

@nathandrawdy Жыл бұрын

Dude, thank you, now to work on my alphabet

@Coffeesurgeons Жыл бұрын

Great if you want to store cushions or pillows.. but not so great with any weight..

@ModernGreaser Жыл бұрын

They hold about 50lbs. I’m a contractor and one bin is full of drywall tools and electrical parts. Works like a champ.

@user-ev1lr4vh2j 3 ай бұрын

Can I ask a potentially stupid question… what if the spacing of the belong joists doesn’t match up with the width of the bins? Don’t the rails need to be screwed into the joists ?

@Inferno29 3 ай бұрын

Mine run opposite of the way I want the bins so I attached 1x4's and screwed them at each truss. Then run the bins I beams and attach them to the 1x4's

@starlight2371 Жыл бұрын

Can you build an insulated cat/ dog house please?

@TruthRevolutionNow Жыл бұрын

And if the ceiling jousts don't match the width of the tote...what do you do?

@undead890 Жыл бұрын

I think you install it perpendicular to the joists so they should work for any width

@txguynnh 8 ай бұрын

😂 I can’t lift mine off the ground much less get them up over my head. Good for Storing pillows I guess.

@MatthewHaneman 2 жыл бұрын

Feel Dunb for asking this question, What if my Deling josts go the other way?

@highzerfoflife 2 жыл бұрын

Rotate your I-beams 90 degrees and slide them in the other way.

@ModernGreaser 2 жыл бұрын

Good point I should have addressed in the video. Maybe I’ll make a update for this video if you run into that issue. Instead of making an I beam, spin the top of the “I” 180 degrees. Screw your 2x3 directly into your 1x3 now running adjacent to the 2x3’s, not Parallel. Does that make sense? Run the adjacent 1x3’s for every ceiling joist you have. I’ll have to make another video for sure.

@MatthewHaneman 2 жыл бұрын

@@ModernGreaser Thank you! Makes sense, a follow up video would be helpful.

@bronsonstephens5799 Жыл бұрын

I believe that you could do it the same way. You just wouldn’t have the ability to use as many screws and your overall strength might be a little less

@jeeperdroop 8 ай бұрын

How low do they hang down from ceiling to bottom of non sagging tote? Hoping to fit above my garage door. My calculations say on an hdx the max it could be is 19”. Is that correct?

@jbrictor 7 ай бұрын

That sounds about right, but factor in the 1" of the wood itself attached to the ceiling.